NAME WebService::Linode - Perl Interface to the Linode.com API. SYNOPSIS my $api = WebService::Linode->new( apikey => 'your api key here'); print Dumper($api->linode_list); $api->linode_reboot(linodeid=>242); This module implements the Linode.com api methods. Linode methods have had dots replaced with underscores to generate the perl method name. All keys and parameters have been lower cased but returned data remains otherwise the same. For additional information see Constructor For documentation of possible arguments to the constructor, see WebService::Linode::Base. Batch requests Each of the Linode API methods below may optionally be prefixed with QUEUE_ to add that request to a queue to be processed later in one or more batch requests which can be processed by calling send_queued_requests. For example: my @linode_ids = () # Get your linode ids through normal methods my @responses = map { $api->linode_ip_list( linodeid=>$_ ) } @linode_ids; Can be reduced to a single request: my @linode_ids = () # Get your linode ids through normal methods $api->QUEUE_linode_ip_list( linodeid=>$_ ) for @linode_ids; my @responses = $api->send_queued_requests; # One api request See WebService::Linode::Base for additional queue management methods. send_queued_requests Send queued batch requests, returns list of responses. Methods from the Linode API account Methods account_estimateinvoice Estimates the invoice for adding a new Linode or NodeBalancer as well as resizing a Linode. This returns two fields: PRICE which is the estimated cost of the invoice, and INVOICE_TO which is the date invoice would be though with timezone set to America/New_York Required Parameters: * mode This is one of the following options: 'linode_new', 'linode_resize', or 'nodebalancer_new'. Optional Parameters: * planid The desired PlanID available from avail.LinodePlans(). This is required for modes 'linode_new' and 'linode_resize'. * paymentterm Subscription term in months. One of: 1, 12, or 24. This is required for modes 'linode_new' and 'nodebalancer_new'. * linodeid This is the LinodeID you want to resize and is required for mode 'linode_resize'. account_info Shows information about your account such as the date your account was opened as well as your network utilization for the current month in gigabytes. account_paybalance Pays current balance on file, returning it in the response. account_updatecard Required Parameters: * ccnumber * ccexpyear * ccexpmonth avail Methods avail_datacenters Returns a list of Linode data center facilities. avail_distributions Returns a list of available Linux Distributions. Optional Parameters: * distributionid Limits the results to the specified DistributionID avail_kernels List available kernels. Optional Parameters: * isxen Limits the results to show only Xen kernels * kernelid avail_linodeplans Returns a structure of Linode PlanIDs containing the Plan label and the availability in each Datacenter. Optional Parameters: * planid Limits the list to the specified PlanID avail_nodebalancers Returns NodeBalancer pricing information. avail_stackscripts Returns a list of available public StackScripts. Optional Parameters: * keywords Search terms * distributionid Limit the results to StackScripts that can be applied to this DistributionID * distributionvendor Debian, Ubuntu, Fedora, etc. domain Methods domain_create Create a domain record. Required Parameters: * domain The zone's name * type master or slave Optional Parameters: * soa_email Required when type=master * axfr_ips IP addresses allowed to AXFR the entire zone, semicolon separated * retry_sec * description Currently undisplayed. * status 0, 1, or 2 (disabled, active, edit mode) * ttl_sec * expire_sec * master_ips When type=slave, the zone's master DNS servers list, semicolon separated * lpm_displaygroup Display group in the Domain list inside the Linode DNS Manager * refresh_sec domain_delete Required Parameters: * domainid domain_list Lists domains you have access to. Optional Parameters: * domainid Limits the list to the specified DomainID domain_update Update a domain record. Required Parameters: * domainid Optional Parameters: * status 0, 1, or 2 (disabled, active, edit mode) * domain The zone's name * ttl_sec * expire_sec * type master or slave * soa_email Required when type=master * refresh_sec * lpm_displaygroup Display group in the Domain list inside the Linode DNS Manager * master_ips When type=slave, the zone's master DNS servers list, semicolon separated * axfr_ips IP addresses allowed to AXFR the entire zone, semicolon separated * retry_sec * description Currently undisplayed. domain_resource Methods domain_resource_create Create a domain record. Required Parameters: * domainid * type One of: NS, MX, A, AAAA, CNAME, TXT, or SRV Optional Parameters: * target When Type=MX the hostname. When Type=CNAME the target of the alias. When Type=TXT the value of the record. When Type=A or AAAA the token of '[remote_addr]' will be substituted with the IP address of the request. * ttl_sec TTL. Leave as 0 to accept our default. * port * weight * priority Priority for MX and SRV records, 0-255 * protocol The protocol to append to an SRV record. Ignored on other record types. * name The hostname or FQDN. When Type=MX the subdomain to delegate to the Target MX server. domain_resource_delete Required Parameters: * resourceid * domainid domain_resource_list Required Parameters: * domainid Optional Parameters: * resourceid domain_resource_update Update a domain record. Required Parameters: * resourceid Optional Parameters: * target When Type=MX the hostname. When Type=CNAME the target of the alias. When Type=TXT the value of the record. When Type=A or AAAA the token of '[remote_addr]' will be substituted with the IP address of the request. * domainid * ttl_sec TTL. Leave as 0 to accept our default. * port * weight * protocol The protocol to append to an SRV record. Ignored on other record types. * priority Priority for MX and SRV records, 0-255 * name The hostname or FQDN. When Type=MX the subdomain to delegate to the Target MX server. linode Methods linode_boot Issues a boot job for the provided ConfigID. If no ConfigID is provided boots the last used configuration profile, or the first configuration profile if this Linode has never been booted. Required Parameters: * linodeid Optional Parameters: * configid The ConfigID to boot, available from linode.config.list(). linode_clone Creates a new Linode, assigns you full privileges, and then clones the specified LinodeID to the new Linode. There is a limit of 5 active clone operations per source Linode. It is recommended that the source Linode be powered down during the clone. Required Parameters: * planid The desired PlanID available from avail.LinodePlans() * linodeid The LinodeID that you want cloned * datacenterid The DatacenterID from avail.datacenters() where you wish to place this new Linode Optional Parameters: * paymentterm Subscription term in months for prepaid customers. One of: 1, 12, or 24 linode_create Creates a Linode and assigns you full privileges. There is a 75-linodes-per-hour limiter. Required Parameters: * planid The desired PlanID available from avail.LinodePlans() * datacenterid The DatacenterID from avail.datacenters() where you wish to place this new Linode Optional Parameters: * paymentterm Subscription term in months for prepaid customers. One of: 1, 12, or 24 linode_delete Immediately removes a Linode from your account and issues a pro-rated credit back to your account, if applicable. To prevent accidental deletes, this requires the Linode has no Disk images. You must first delete its disk images." Required Parameters: * linodeid The LinodeID to delete Optional Parameters: * skipchecks Skips the safety checks and will always delete the Linode linode_list Returns a list of all Linodes user has access or delete to, including some properties. Status values are -1: Being Created, 0: Brand New, 1: Running, and 2: Powered Off. Optional Parameters: * linodeid Limits the list to the specified LinodeID linode_mutate Upgrades a Linode to its next generation. Required Parameters: * linodeid linode_reboot Issues a shutdown, and then boot job for a given LinodeID. Required Parameters: * linodeid Optional Parameters: * configid linode_resize Resizes a Linode from one plan to another. Immediately shuts the Linode down, charges/credits the account, and issue a migration to another host server. Required Parameters: * planid The desired PlanID available from avail.LinodePlans() * linodeid linode_shutdown Issues a shutdown job for a given LinodeID. Required Parameters: * linodeid linode_update Updates a Linode's properties. Required Parameters: * linodeid Optional Parameters: * alert_bwquota_threshold Percentage of monthly bw quota * alert_bwin_threshold Mb/sec * alert_cpu_threshold CPU Alert threshold, percentage 0-800 * label This Linode's label * ms_ssh_port * lpm_displaygroup Display group in the Linode list inside the Linode Manager * alert_bwin_enabled Enable the incoming bandwidth email alert * ms_ssh_disabled * backupwindow * alert_cpu_enabled Enable the cpu usage email alert * backupweeklyday * alert_diskio_enabled Enable the disk IO email alert * ms_ssh_ip * alert_bwquota_enabled Enable the bw quote email alert * ms_ssh_user * watchdog Enable the Lassie shutdown watchdog * alert_bwout_enabled Enable the outgoing bandwidth email alert * alert_bwout_threshold Mb/sec * alert_diskio_threshold IO ops/sec linode_webconsoletoken Generates a console token starting a web console LISH session for the requesting IP Required Parameters: * linodeid linode_config Methods linode_config_create Creates a Linode Configuration Profile. Required Parameters: * linodeid * label The Label for this profile * disklist A comma delimited list of DiskIDs; position reflects device node. The 9th element for specifying the initrd. * kernelid The KernelID for this profile. Found in avail.kernels() Optional Parameters: * comments Comments you wish to save along with this profile * helper_xen Enable the Xen filesystem helper. Corrects fstab and inittab/upstart entries depending on the kernel you're booting. You want this. * devtmpfs_automount Controls if pv_ops kernels should automount devtmpfs at boot. * rootdevicecustom A custom root device setting. * rootdevicero Enables the 'ro' kernel flag. Modern distros want this. * helper_depmod Creates an empty modprobe file for the kernel you're booting. * helper_disableupdatedb Enable the disableUpdateDB filesystem helper * helper_network Automatically creates network configuration files for your distro and places them into your filesystem. * rootdevicenum Which device number (1-8) that contains the root partition. 0 to utilize RootDeviceCustom. * runlevel One of 'default', 'single', 'binbash' * ramlimit RAMLimit in MB. 0 for max. linode_config_delete Deletes a Linode Configuration Profile. Required Parameters: * configid * linodeid linode_config_list Lists a Linode's Configuration Profiles. Required Parameters: * linodeid Optional Parameters: * configid linode_config_update Updates a Linode Configuration Profile. Required Parameters: * configid Optional Parameters: * comments Comments you wish to save along with this profile * linodeid * rootdevicero Enables the 'ro' kernel flag. Modern distros want this. * label The Label for this profile * rootdevicenum Which device number (1-8) that contains the root partition. 0 to utilize RootDeviceCustom. * disklist A comma delimited list of DiskIDs; position reflects device node. The 9th element for specifying the initrd. * kernelid The KernelID for this profile. Found in avail.kernels() * ramlimit RAMLimit in MB. 0 for max. * helper_xen Enable the Xen filesystem helper. Corrects fstab and inittab/upstart entries depending on the kernel you're booting. You want this. * rootdevicecustom A custom root device setting. * devtmpfs_automount Controls if pv_ops kernels should automount devtmpfs at boot. * helper_network Automatically creates network configuration files for your distro and places them into your filesystem. * helper_disableupdatedb Enable the disableUpdateDB filesystem helper * helper_depmod Creates an empty modprobe file for the kernel you're booting. * runlevel One of 'default', 'single', 'binbash' linode_disk Methods linode_disk_create Required Parameters: * linodeid * label The display label for this Disk * type The formatted type of this disk. Valid types are: ext3, ext4, swap, raw * size The size in MB of this Disk. Optional Parameters: * rootsshkey * fromdistributionid * rootpass * isreadonly Enable forced read-only for this Disk linode_disk_createfromdistribution Required Parameters: * size Size of this disk image in MB * rootpass The root user's password * linodeid * distributionid The DistributionID to create this disk from. Found in avail.distributions() * label The label of this new disk image Optional Parameters: * rootsshkey Optionally sets this string into /root/.ssh/authorized_keys upon distribution configuration. linode_disk_createfromimage Creates a new disk from a previously imagized disk. Required Parameters: * imageid The ID of the frozen image to deploy from * linodeid Specifies the Linode to deploy on to Optional Parameters: * rootsshkey Optionally sets this string into /root/.ssh/authorized_keys upon image deployment * rootpass Optionally sets the root password at deployment time. If a password is not provided the existing root password of the frozen image will not be modified * label The label of this new disk image * size The size of the disk image to creates. Defaults to the minimum size required for the requested image linode_disk_createfromstackscript Required Parameters: * linodeid * stackscriptudfresponses JSON encoded name/value pairs, answering this StackScript's User Defined Fields * label The label of this new disk image * size Size of this disk image in MB * distributionid Which Distribution to apply this StackScript to. Must be one from the script's DistributionIDList * rootpass The root user's password * stackscriptid The StackScript to create this image from Optional Parameters: * rootsshkey Optionally sets this string into /root/.ssh/authorized_keys upon distribution configuration. linode_disk_delete Required Parameters: * diskid * linodeid linode_disk_duplicate Performs a bit-for-bit copy of a disk image. Required Parameters: * diskid * linodeid linode_disk_imagize Creates a gold-master image for future deployments Required Parameters: * diskid Specifies the source Disk to create the image from * linodeid Specifies the source Linode to create the image from Optional Parameters: * description An optional description of the created image * label Sets the name of the image shown in the base image list, defaults to the source image label linode_disk_list Status values are 1: Ready and 2: Being Deleted. Required Parameters: * linodeid Optional Parameters: * diskid linode_disk_resize Required Parameters: * diskid * linodeid * size The requested new size of this Disk in MB linode_disk_update Required Parameters: * diskid Optional Parameters: * linodeid * isreadonly Enable forced read-only for this Disk * label The display label for this Disk linode_ip Methods linode_ip_addprivate Assigns a Private IP to a Linode. Returns the IPAddressID that was added. Required Parameters: * linodeid linode_ip_addpublic Assigns a Public IP to a Linode. Returns the IPAddressID and IPAddress that was added. Required Parameters: * linodeid The LinodeID of the Linode that will be assigned an additional public IP address linode_ip_list Returns the IP addresses of all Linodes you have access to. Optional Parameters: * linodeid If specified, limits the result to this LinodeID * ipaddressid If specified, limits the result to this IPAddressID linode_ip_setrdns Sets the rDNS name of a Public IP. Returns the IPAddressID and IPAddress that were updated. Required Parameters: * hostname The hostname to set the reverse DNS to * ipaddressid The IPAddressID of the address to update linode_ip_swap Exchanges Public IP addresses between two Linodes within a Datacenter. The destination of the IP Address can be designated by either the toLinodeID or withIPAddressID parameter. Returns the resulting relationship of the Linode and IP Address parameters. When performing a one directional swap, the source is represented by the first of the two resultant array members. Required Parameters: * ipaddressid The IPAddressID of an IP Address to transfer or swap Optional Parameters: * tolinodeid The LinodeID of the Linode where IPAddressID will be transfered * withipaddressid The IP Address ID to swap linode_job Methods linode_job_list Required Parameters: * linodeid Optional Parameters: * pendingonly * jobid Limits the list to the specified JobID stackscript Methods stackscript_create Create a StackScript. Required Parameters: * script The actual script * distributionidlist Comma delimited list of DistributionIDs that this script works on * label The Label for this StackScript Optional Parameters: * rev_note * description * ispublic Whether this StackScript is published in the Library, for everyone to use stackscript_delete Required Parameters: * stackscriptid stackscript_list Lists StackScripts you have access to. Optional Parameters: * stackscriptid Limits the list to the specified StackScriptID stackscript_update Update a StackScript. Required Parameters: * stackscriptid Optional Parameters: * script The actual script * rev_note * ispublic Whether this StackScript is published in the Library, for everyone to use * label The Label for this StackScript * description * distributionidlist Comma delimited list of DistributionIDs that this script works on nodeblancer Methods nodebalancer_config Methods nodebalancer_config_create Required Parameters: * nodebalancerid The parent NodeBalancer's ID Optional Parameters: * check_path When check=http, the path to request * ssl_cert SSL certificate served by the NodeBalancer when the protocol is 'https' * check_body When check=http_body, a regex against the expected result body * stickiness Session persistence. One of 'none', 'table', 'http_cookie' * port Port to bind to on the public interfaces. 1-65534 * check_timeout Seconds to wait before considering the probe a failure. 1-30. Must be less than check_interval. * check Perform active health checks on the backend nodes. One of 'connection', 'http', 'http_body' * ssl_key Unpassphrased private key for the SSL certificate when protocol is 'https' * check_attempts Number of failed probes before taking a node out of rotation. 1-30 * check_interval Seconds between health check probes. 2-3600 * protocol Either 'tcp', 'http', or 'https' * algorithm Balancing algorithm. One of 'roundrobin', 'leastconn', 'source' nodebalancer_config_delete Deletes a NodeBalancer's Config Required Parameters: * configid The ConfigID to delete * nodebalancerid nodebalancer_config_list Returns a list of NodeBalancers this user has access or delete to, including their properties Required Parameters: * nodebalancerid Optional Parameters: * configid Limits the list to the specified ConfigID nodebalancer_config_update Updates a Config's properties Required Parameters: * configid Optional Parameters: * check_path When check=http, the path to request * ssl_cert SSL certificate served by the NodeBalancer when the protocol is 'https' * check_body When check=http_body, a regex against the expected result body * stickiness Session persistence. One of 'none', 'table', 'http_cookie' * port Port to bind to on the public interfaces. 1-65534 * check_timeout Seconds to wait before considering the probe a failure. 1-30. Must be less than check_interval. * check Perform active health checks on the backend nodes. One of 'connection', 'http', 'http_body' * ssl_key Unpassphrased private key for the SSL certificate when protocol is 'https' * check_attempts Number of failed probes before taking a node out of rotation. 1-30 * check_interval Seconds between health check probes. 2-3600 * protocol Either 'tcp', 'http', or 'https' * algorithm Balancing algorithm. One of 'roundrobin', 'leastconn', 'source' nodebalancer_node Methods nodebalancer_node_create Required Parameters: * address The address:port combination used to communicate with this Node * label This backend Node's label * configid The parent ConfigID to attach this Node to Optional Parameters: * mode The connections mode for this node. One of 'accept', 'reject', or 'drain' * weight Load balancing weight, 1-255. Higher means more connections. nodebalancer_node_delete Deletes a Node from a NodeBalancer Config Required Parameters: * nodeid The NodeID to delete nodebalancer_node_list Returns a list of Nodes associated with a NodeBalancer Config Required Parameters: * configid Optional Parameters: * nodeid Limits the list to the specified NodeID nodebalancer_node_update Updates a Node's properties Required Parameters: * nodeid Optional Parameters: * address The address:port combination used to communicate with this Node * mode The connections mode for this node. One of 'accept', 'reject', or 'drain' * weight Load balancing weight, 1-255. Higher means more connections. * label This backend Node's label user Methods user_getapikey Authenticates a Linode Manager user against their username, password, and two-factor token (when enabled), and then returns a new API key, which can be used until it expires. The number of active keys is limited to 20. Required Parameters: * password * username Optional Parameters: * label An optional label for this key. * token Required when two-factor authentication is enabled. * expires Number of hours the key will remain valid, between 0 and 8760. 0 means no expiration. Defaults to 168. image Methods image_delete Deletes a gold-master image Required Parameters: * imageid The ID of the gold-master image to delete image_list Lists available gold-master images Optional Parameters: * imageid Request information for a specific gold-master image * pending Show images currently being created. image_update Update an Image record. Required Parameters: * imageid The ID of the Image to modify. Optional Parameters: * label The label of the Image. * description An optional description of the Image. AUTHORS * Michael Greb, "" * Stan "The Man" Schwertly "" COPYRIGHT & LICENSE Copyright 2008-2014 Michael Greb, all rights reserved. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.