NAME
    Test::Chunks - Chunky Data Driven Testing Support

SYNOPSIS
        use Test::Chunks;
        use Pod::Simple;

        delimiters qw(=== +++);
        plan tests => 1 * chunks;
    
        for my $chunk (chunks) {
            # Note that this code is conceptual only. Pod::Simple is not so
            # simple as to provide a simple pod_to_html function.
            is(
                Pod::Simple::pod_to_html($chunk->pod),
                $chunk->text,
                $chunk->description, 
            );
        }

        __END__

        === Header 1 Test
        +++ pod
        =head1 The Main Event
        +++ html
        <h1>The Main Event</h1>

        === List Test
        +++ pod
        =over
        =item * one
        =item * two
        =back

        +++ html
        <ul>
        <li>one</li>
        <li>two</li>
        </ul>

DESCRIPTION
    There are many testing situations where you have a set of inputs and a
    set of expected outputs and you want to make sure your process turns
    each input chunk into the corresponding output chunk. Test::Chunks
    allows you do this with a minimal amount of code.

    Test::Chunks is optimized for input and output chunks that span multiple
    lines of text.

EXPORTED FUNCTIONS
    Test::Chunks extends Test::More and exports all of its functions. So you
    can basically write your tests the same as Test::More. Test::Chunks
    exports a few more functions though:

  chunks()
    The most important function is "chunks". In list context it returns a
    list of "Test::Chunk" objects that are generated from the test
    specification in the "DATA" section of your test file. In scalar context
    it returns the number of objects. This is useful to calculate your
    Test::More plan.

    Each Test::Chunk object has methods that correspond to the names of that
    object's data sections. There is also a "description" method for
    accessing the description text of the object.

  run(&subroutine)
    There are many ways to write your tests. You can reference each chunk
    individually or you can loop over all the chunks and perform a common
    operation. The "run" function does the looping for you, so all you need
    to do is pass it a code block to execute for each chunk.

    The "run" function takes a subroutine as an argument, and calls the sub
    one time for each chunk in the specification. It passes the current
    chunk object to the subroutine.

        run {
            my $chunk = shift;
            is(process($chunk->foo), $chunk->bar, $chunk->description);
        };

  run_is(data_name1, data_name2)
    Many times you simply want to see if two data sections are equivalent in
    every chunk, probably after having been run through one or more filters.
    With the "run_is" function, you can just pass the names of any two data
    sections that exist in every chunk, and it will loop over every chunk
    comparing the two sections.

        run_is 'foo', 'bar';

  run_is_deeply(data_name1, data_name2)
    Like "run_is" but uses "is_deeply" for complex data structure
    comparison.

  run_like(data_name, regexp | data_name);
    The "run_like" function is similar to "run_is" except the second
    argument is a regular expression. The regexp can either be a "qr{}"
    object or a data section that has been filtered into a regular
    expression.

        run_like 'foo', qr{<html.*};
        run_like 'foo', 'match';

  delimiters($chunk_delimiter, $data_delimiter)
    Override the default delimiters of "===" and "---".

  spec_file($file_name)
    By default, Test::Chunks reads its input from the DATA section. This
    function tells it to get the spec from a file instead.

  spec_string($test_data)
    By default, Test::Chunks reads its input from the DATA section. This
    function tells it to get the spec from a string that has been prepared
    somehow.

  filters(@filter_list)
    Specify a list of additional filters to be applied to all chunks. See
    "FILTERS" below.

  filters_map($hash_ref)
    This function allows you to specify a hash that maps data section names
    to an array ref of filters for that data type.

        filters_map({
            xxx => [qw(chomp lines)],
            yyy => ['yaml'],
            zzz => 'eval',
        });

    If a filters list has only one element, the array ref is optional.

  default_object()
    Returns the default Test::Chunks object. This is useful if you feel the
    need to do an OO operation in otherwise functional test code. See OO
    below.

  WWW() XXX() YYY() ZZZ()
    These debugging functions are exported from the Spiffy.pm module. See
    Spiffy for more info.

TEST SPECIFICATION
    Test::Chunks allows you to specify your test data in an external file,
    the DATA section of your program or from a scalar variable containing
    all the text input.

    A *test specification* is a series of text lines. Each test (or chunk)
    is separated by a line containing the chunk delimiter and an optional
    "description". Each chunk is further subdivided into named sections with
    a line containing the data delimiter and the data section name.

    Here is an example:

        use Test::Chunks;
    
        delimiters qw(### :::);

        # test code here

        __END__
    
        ### Test One
    
        ::: foo
        a foo line
        another foo line

        ::: bar
        a bar line
        another bar line

        ### Test Two
    
        ::: foo
        some foo line
        some other foo line
    
        ::: bar
        some bar line
        some other bar line

        ::: baz
        some baz line
        some other baz line

    This example specifies two chunks. They both have foo and bar data
    sections. The second chunk has a baz component. The chunk delimiter is
    "###" and the data delimiter is ":::".

    The default chunk delimiter is "===" and the default data delimiter is
    "---".

    There are two special data section names.

        --- SKIP
        --- ONLY

    A chunk with a SKIP section causes that test to be ignored. This is
    useful to disable a test temporarily.

    A chunk with an ONLY section causes only that chunk to be return. This
    is useful when you are concentrating on getting a single test to pass.
    If there is more than one chunk with ONLY, the first one will be chosen.

FILTERS
    The real power in writing tests with Test::Chunks comes from its
    filtering capabilities. Test::Chunks comes with an ever growing set of
    useful generic filters than you can sequence and apply to various test
    chunks. That means you can specify the chunk serialization in the most
    readable format you can find, and let the filters translate it into what
    you really need for a test. It is easy to write your own filters as
    well.

    Test::Chunks allows you to specify a list of filters. The default
    filters are "norm" and "trim". These filters will be applied (in order)
    to the data after it has been parsed from the specification and before
    it is set into its Test::Chunk object.

    You can add to the the default filter list with the "filters" function.
    You can specify additional filters to a specific chunk by listing them
    after the section name on a data section delimiter line.

    Example:

        use Test::Chunks;

        filters qw(foo bar);
        filters_map { perl => 'strict'};

        sub upper { uc(shift) }

        __END__

        === Test one
        --- foo trim chomp upper
        ...

        --- bar -norm
        ...

        --- perl eval dumper
        my @foo = map {
            - $_;
        } 1..10;
        \ @foo;
    
    Putting a "-" before a filter on a delimiter line, disables that filter.

  norm
    Normalize the data. Change non-Unix line endings to Unix line endings.

  chomp
    Remove the final newline. The newline on the last line.

  trim
    Remove extra blank lines from the beginning and end of the data. This
    allows you to visually separate your test data with blank lines.

  lines
    Break the data into an anonymous array of lines. Each line (except
    possibly the last one if the "chomp" filter came first) will have a
    newline at the end.

  list
    Same as the "lines" filter, except all newlines are chomped.

  eval
    Run Perl's "eval" command against the data and use the returned value as
    the data.

  regexp[=xism]
    The "regexp" filter will turn your data section into a regular
    expression object. You can pass in extra flags after an equals sign.

    If the text contains more than one line then the 'x' flag is assumed.

  get_url
    The text is chomped and considered to be a url. Then LWP::Simple::get is
    used to fetch the contents of the url.

  yaml
    Apply the YAML::Load function to the data chunk and use the resultant
    structure. Requires YAML.pm.

  dumper
    Take a data structure (presumably from another filter like eval) and use
    Data::Dumper to dump it in a canonical fashion.

  strict
    Prepend the string:

        use strict; 
        use warnings;

    to the chunk's text.

  base64
    Decode base64 data. Useful for binary tests.

  esc
    Unescape all backslash escaped chars.

  Rolling Your Own Filters
    Creating filter extensions is very simple. You can either write a
    *function* in the "main" namespace, or a *method* in the
    "Test::Chunks::Filter" namespace. In either case the text and any extra
    arguments are passed in and you return whatever you want the new value
    to be.

    Here is a self explanatory example:

        use Test::Chunks;

        filters 'foo', 'bar=xyz';

        sub foo {
            transform(shift);
        }
        
        sub Test::Chunks::Filter::bar {
            my $class = shift;
            my $data = shift;
            my $args = shift;
            # transform $data in a barish manner
            return $data;
        }    

    Normally you'll probably just use the functional interface, although all
    the builtin filters are methods.

OO
    Test::Chunks has a nice functional interface for simple usage. Under the
    hood everything is object oriented. A default Test::Chunks object is
    created and all the functions are really just method calls on it.

    This means if you need to get fancy, you can use all the object oriented
    stuff too. Just create new Test::Chunk objects and use the functions as
    methods.

        use Test::Chunks;
        my $chunks1 = Test::Chunks->new;
        my $chunks2 = Test::Chunks->new;

        $chunks1->delimiters(qw(!!! @@@))->spec_file('test1.txt');
        $chunks2->delimiters(qw(### $$$))->spec_string($test_data);

        plan tests => $chunks1->chunks + $chunks2->chunks;

        # ... etc

OTHER COOL FEATURES
    Test::Chunks automatically adds

        use strict;
        use warnings;

    to all of your test scripts. A Spiffy feature indeed.

AUTHOR
    Brian Ingerson <ingy@cpan.org>

COPYRIGHT
    Copyright (c) 2005. Brian Ingerson. All rights reserved.

    This program is free software; you can redistribute it and/or modify it
    under the same terms as Perl itself.

    See http://www.perl.com/perl/misc/Artistic.html