NAME
    Net::Telnet::Cisco - interact with a Cisco router

SYNOPSIS
      use Net::Telnet::Cisco;

      my $cs = Net::Telnet::Cisco->( Host => '123.123.123.123' );
      $cs->login( 'login', 'password' );

      # Turn off paging
      my @cmd_output = $cs->cmd( 'terminal length 0' );

      # Execute a command
      @cmd_output = $cs->cmd( 'show running-config' );
      print @cmd_output;

      # Generate an error on purpose
      # This error handler prints the errmsg and continues.
      $cs->errmode( sub { print @_, "\n" } );

      @cmd_output = $cs->cmd( 'asdf' ); # Bad command.

      print "-" x 30, "\n";
      print "Last prompt: <",  $cs->last_prompt, ">\n";
      print "Last command: <", $cs->last_cmd,    ">\n";
      print "Last error: <",   $cs->errmsg,      ">\n";
      print "Cmd output: <",   @cmd_output,      ">\n";
      print "-" x 30, "\n";

      $cs->close;

DESCRIPTION
    Net::Telnet::Cisco provides additional functionality to Net::Telnet for
    dealing with Cisco routers.

    Things you should know:

    The default cmd_prompt is /[\w\(\)\.-]*[\$#>]$/, suitable for matching
    'rtrname#'.

    cmd() parses router-generated error messages - the kind that begin with
    a '%' - and stows them in $obj->errmsg(), so that errmode can be used to
    perform automatic error-handling actions.

FIRST
    Before you use Net::Telnet::Cisco, you should probably have a good
    understanding of Net::Telnet, so perldoc Net::Telnet first, and then
    come back to Net::Telnet::Cisco to see where the improvements are.

    Some things are easier to accomplish with Net::SNMP. SNMP has three
    advantages: it tends to be faster, handles errors better, and doesn't
    use any vtys on the router. SNMP does have some limitations, so for
    anything you can't accomplish with SNMP, there's Net::Telnet::Cisco.

METHODS
    New methods not found in Net::Telnet follow:

    enable - enter enabled mode
            $ok = $obj->enable;

            $ok = $obj->enable( $password );

        This method changes privilege level to enabled mode, (i.e. root)

        If an argument is provided by the caller, it will be used as a
        password.

        enable() returns 1 on success and undef on failure.

    disable - leave enabled mode
            $ok = $obj->disable;

        This method exits the router's privileged mode.

    last_prompt - displays the last prompt matched by prompt()
            $match = $obj->last_prompt;

        last_prompt() will return undef if the program has not matched a
        prompt yet.

    login - login to a router.
        Supercedes Net::Telnet::login(). Net::Telnet::Cisco will correctly
        log into a router if the session begins with a password prompt (and
        ignores the login or username step entirely).

AUTHOR
    Joshua_Keroes@eli.net $Date: 2000/07/14 18:13:16 $

    It would greatly amuse the author if you would send email to him and
    tell him how you are using Net::Telnet::Cisco.

SEE ALSO
    Net::Telnet, Net::SNMP

COPYRIGHT
    Copyright (c) 2000 Joshua Keroes, Electric Lightwave Inc. All rights
    reserved. This program is free software; you can redistribute it and/or
    modify it under the same terms as Perl itself.