NAME RRD::Simple - Simple interface to create and store data in RRD files SYNOPSIS use strict; use RRD::Simple (); # Create an interface object my $rrd = RRD::Simple->new( file => "myfile.rrd" ); # Create a new RRD file with 3 data sources called # bytesIn, bytesOut and faultsPerSec. $rrd->create( bytesIn => "GAUGE", bytesOut => "GAUGE", faultsPerSec => "COUNTER" ); # Put some arbitary data values in the RRD file for same # 3 data sources called bytesIn, bytesOut and faultsPerSec. $rrd->update( bytesIn => 10039, bytesOut => 389, faultsPerSec => 0.4 ); # Generate graphs: # /var/tmp/myfile-daily.png, /var/tmp/myfile-weekly.png # /var/tmp/myfile-monthly.png, /var/tmp/myfile-annual.png my %rtn = $rrd->graph( destination => "/var/tmp", title => "Network Interface eth0", vertical_label => "Bytes/Faults", interlaced => "" ); printf("Created %s\n",join(", ",map { $rtn{$_}->[0] } keys %rtn)); # Return information about an RRD file my $info = $rrd->info; require Data::Dumper; print Data::Dumper::Dumper($info); # Get unixtime of when RRD file was last updated my $lastUpdated = $rrd->last; print "myfile.rrd was last updated at " . scalar(localtime($lastUpdated)) . "\n"; # Get list of data source names from an RRD file my @dsnames = $rrd->sources; print "Available data sources: " . join(", ", @dsnames) . "\n"; # And for the ultimately lazy, you could create and update # an RRD in one go using a one-liner like this: perl -MRRD::Simple=:all -e"update(@ARGV)" myfile.rrd bytesIn 99999 DESCRIPTION RRD::Simple provides a simple interface to RRDTool's RRDs module. This module does not currently offer "fetch" method that is available in the RRDs module. It does however create RRD files with a sensible set of default RRA (Round Robin Archive) definitions, and can dynamically add new data source names to an existing RRD file. This module is ideal for quick and simple storage of data within an RRD file if you do not need to, nor want to, bother defining custom RRA definitions. METHODS new my $rrd = RRD::Simple->new( file => "myfile.rrd", rrdtool => "/usr/local/rrdtool-1.2.11/bin/rrdtool", cf => [ qw(AVERAGE MAX) ], default_dstype => "GAUGE", ); The "file" parameter is currently optional but will become mandatory in future releases, replacing the optional $rrdfile parameters on subsequent methods. This parameter specifies the RRD filename to be used. The "rrdtool" parameter is optional. It specifically defines where the "rrdtool" binary can be found. If not specified, the module will search for the "rrdtool" binary in your path, an additional location relative where the "RRDs" module was loaded from, and in /usr/local/rrdtool*. The "rrdtool" binary is only used by the "add_source" method, and only under certain circumstances. The "add_source" method may also be called automatically by the "update" method, if data point values for a previously undefined data source are provided for insertion. The "cf" parameter is optional, and defaults to AVERAGE and MAX. The "cf" parameter defines which consolidation functions are used in round robin archives (RRAs) when creating new RRD files. The "default_dstype" parameter is optional. Specifying the default data source type (DST) through the new() method allows the DST to be localised to the $rrd object instance rather than be global to the RRD::Simple package. See $RRD::Simple::DEFAULT_DSTYPE. create $rrd->create($rrdfile, $period, source_name => "TYPE", source_name => "TYPE", source_name => "TYPE" ); $rrdfile is optional and will default to using the RRD filename specified by the "new" constructor method, or "$0.rrd". (Script basename with the file extension of .rrd). $period is optional and will default to "year". Valid options are "day", "week", "month", "year", "3years" and "mrtg". Specifying a data retention period value will change how long data will be retained for within the RRD file. The "mrtg" scheme will try and mimic the data retention period used by MRTG v2.13.2 (. The "mrtg" data retention period uses a data stepping resolution of 300 seconds (5 minutes) and heartbeat of 600 seconds (10 minutes), whereas all the other data retention periods use a data stepping resolution of 60 seconds (1 minute) and heartbeat of 120 seconds (2 minutes). RRD::Simple will croak and die if you try to create an RRD file that already exists. update $rrd->update($rrdfile, $unixtime, source_name => "VALUE", source_name => "VALUE", source_name => "VALUE" ); $rrdfile is optional and will default to using the RRD filename specified by the "new" constructor method, or "$0.rrd". (Script basename with the file extension of .rrd). $unixtime is optional and will default to "time()" (the current unixtime). Specifying this value will determine the date and time that your data point values will be stored against in the RRD file. If you try to update a value for a data source that does not exist, it will automatically be added for you. The data source type will be set to whatever is contained in the $RRD::Simple::DEFAULT_DSTYPE variable. (See the VARIABLES section below). If you explicitly do not want this to happen, then you should check that you are only updating pre-existing data source names using the "sources" method. You can manually add new data sources to an RRD file by using the "add_source" method, which requires you to explicitly set the data source type. If you try to update an RRD file that does not exist, it will attept to create the RRD file for you using the same behaviour as described above. A warning message will be displayed indicating that the RRD file is being created for you if have perl warnings turned on. last my $unixtime = $rrd->last($rrdfile); $rrdfile is optional and will default to using the RRD filename specified by the "new" constructor method, or "$0.rrd". (Script basename with the file extension of .rrd). sources my @sources = $rrd->sources($rrdfile); $rrdfile is optional and will default to using the RRD filename specified by the "new" constructor method, or "$0.rrd". (Script basename with the file extension of .rrd). add_source $rrd->add_source($rrdfile, source_name => "TYPE" ); $rrdfile is optional and will default to using the RRD filename specified by the "new" constructor method, or "$0.rrd". (Script basename with the file extension of .rrd). You may add a new data source to an existing RRD file using this method. Only one data source name can be added at a time. You must also specify the data source type. This method can be called internally by the "update" method to automatically add missing data sources. rename_source $rrd->rename_source($rrdfile, "old_datasource", "new_datasource"); $rrdfile is optional and will default to using the RRD filename specified by the "new" constructor method, or "$0.rrd". (Script basename with the file extension of .rrd). You may renames a data source in an existing RRD file using this method. graph my %rtn = $rrd->graph($rrdfile, destination => "/path/to/write/graph/images", basename => "graph_basename", timestamp => "both", # graph, rrd, both or none sources => [ qw(source_name1 source_name2 source_name3) ], source_colors => [ qw(ff0000 aa3333 000000) ], source_labels => [ ("My Source 1","My Source Two","Source 3") ], source_drawtypes => [ qw(LINE1 AREA LINE) ], line_thickness => 2, extended_legend => 1, rrd_graph_option => "value", rrd_graph_option => "value", rrd_graph_option => "value" ); $rrdfile is optional and will default to using the RRD filename specified by the "new" constructor method, or "$0.rrd". (Script basename with the file extension of .rrd). Graph options specific to RRD::Simple are: destination The "destination" parameter is optional, and it will default to the same path location as that of the RRD file specified by $rrdfile. Specifying this value will force the resulting graph images to be written to this path location. (The specified path must be a valid directory with the sufficient permissions to write the graph images). basename The "basename" parameter is optional. This parameter specifies the basename of the graph image files that will be created. If not specified, tt will default to the name of the RRD file. For exmaple, if you specify a basename name of "mygraph", the following graph image files will be created in the "destination" directory: mygraph-daily.png mygraph-weekly.png mygraph-monthly.png mygraph-annual.png The default file format is "png", but this can be explicitly specified using the standard RRDs options. (See below). timestamp my %rtn = $rrd->graph($rrdfile, timestamp => "graph", # graph, rrd, both or none ); The "timestamp" parameter is optional, but will default to "graph". This parameter specifies which "last upated" timestamps should be added to the bottom right hand corner of the graph. Valid values are: "graph" - the timestamp of when the graph was last updated will be used, "rrd" - the timestamp of when the RRD file was last updated will be used, "both" - both the timestamps of when the graph and RRD file were last updated will be used, "none" - no timestamp will be used. sources The "sources" parameter is optional. This parameter should be an array of data source names that you want to be plotted. All data sources will be plotted by default. source_colors my %rtn = $rrd->graph($rrdfile, source_colors => [ qw(ff3333 ff00ff ffcc99) ], ); %rtn = $rrd->graph($rrdfile, source_colors => { source_name1 => "ff3333", source_name2 => "ff00ff", source_name3 => "ffcc99", }, ); The "source_colors" parameter is optional. This parameter should be an array or hash of hex triplet colors to be used for the plotted data source lines. A selection of vivid primary colors will be set by default. source_labels my %rtn = $rrd->graph($rrdfile, sources => [ qw(source_name1 source_name2 source_name3) ], source_labels => [ ("My Source 1","My Source Two","Source 3") ], ); %rtn = $rrd->graph($rrdfile, source_labels => { source_name1 => "My Source 1", source_name2 => "My Source Two", source_name3 => "Source 3", }, ); The "source_labels" parameter is optional. The parameter should be an array or hash of labels to be placed in the legend/key underneath the graph. An array can only be used if the "sources" parameter is also specified, since the label index position in the array will directly relate to the data source index position in the "sources" array. The data source names will be used in the legend/key by default if no "source_labels" parameter is specified. source_drawtypes my %rtn = $rrd->graph($rrdfile, source_drawtypes => [ qw(LINE1 AREA LINE) ], ); %rtn = $rrd->graph($rrdfile, source_colors => { source_name1 => "LINE1", source_name2 => "AREA", source_name3 => "LINE", }, ); %rtn = $rrd->graph($rrdfile, sources => [ qw(system user iowait idle) ] source_colors => [ qw(AREA STACK STACK STACK) ], ); The "source_drawtypes" parameter is optional. This parameter should be an array or hash of drawing/plotting types to be used for the plotted data source lines. By default all data sources are drawn as lines (LINE), but data sources may also be drawn as filled areas (AREA). Valid values are, LINE, LINE*n* (where *n* represents the thickness of the line in pixels), AREA or STACK. line_thickness Specifies the thickness of the data lines drawn on the graphs for any data sources that have not had a specific line thinkness already specified using the "source_drawtypes" option. Valid values are 1, 2 and 3 (pixels). extended_legend Prints more detailed information in the graph legend by adding the minimum, maximum and last values recorded on the graph for each data source. Common RRD graph options are: title A horizontal string at the top of the graph. vertical_label A vertically placed string at the left hand side of the graph. width The width of the canvas (the part of the graph with the actual data and such). This defaults to 400 pixels. height The height of the canvas (the part of the graph with the actual data and such). This defaults to 100 pixels. For examples on how to best use the "graph" method, refer to the example scripts that are bundled with this module in the examples/ directory. A complete list of parameters can be found at . retention_period my $seconds = $rrd->retention_period($rrdfile); $rrdfile is optional and will default to using the RRD filename specified by the "new" constructor method, or "$0.rrd". (Script basename with the file extension of .rrd). This method will return a maximum period of time (in seconds) that the RRD file will store data for. info my $info = $rrd->info($rrdfile); $rrdfile is optional and will default to using the RRD filename specified by the "new" constructor method, or "$0.rrd". (Script basename with the file extension of .rrd). This method will return a complex data structure containing details about the RRD file, including RRA and data source information. heartbeat my $heartbeat = $rrd->heartbeat($rrdfile, "dsname"); my @rtn = $rrd->heartbeat($rrdfile, "dsname", 600); $rrdfile is optional and will default to using the RRD filename specified by the "new" constructor method, or "$0.rrd". (Script basename with the file extension of .rrd). This method will return the current heartbeat of a data source, or set a new heartbeat of a data source. VARIABLES $RRD::Simple::DEBUG Debug and trace information will be printed to STDERR if this variable if set to 1 (boolean true). This variable will take its value from $ENV{DEBUG}, if it exists, otherwise it will default to 0 (boolean false). This is a normal package variable and may be safely modified at any time. $RRD::Simple::DEFAULT_DSTYPE This variable is used as the default data source type when creating or adding new data sources, when no other data source type is explicitly specified. This variable will take its value from $ENV{DEFAULT_DSTYPE}, if it exists, otherwise it will default to "GAUGE". This is a normal package variable and may be safely modified at any time. EXPORTS You can export the following functions if you do not wish to go through the extra effort of using the OO interface: create update last_update (synonym for the last() method) sources add_source rename_source graph retention_period info heartbeat The tag "all" is available to easily export everything: use RRD::Simple qw(:all); See the examples and unit tests in this distribution for more details. SEE ALSO RRDTool::OO, RRDs, , examples/*.pl, , VERSION $Id: Simple.pm 956 2007-02-27 18:06:01Z nicolaw $ AUTHOR Nicola Worthington If you like this software, why not show your appreciation by sending the author something nice from her Amazon wishlist? ( http://www.amazon.co.uk/gp/registry/1VZXC59ESWYK0?sort=priority ) COPYRIGHT Copyright 2005,2006,2007 Nicola Worthington. This software is licensed under The Apache Software License, Version 2.0.