NAME Net::Appliance::Session - Run command-line sessions to network appliances VERSION This document refers to version 0.05 of Net::Appliance::Session. SYNOPSIS use Net::Appliance::Session; my $s = Net::Appliance::Session->new('hostname.example'); eval { $s->connect(Name => 'username', Password => 'loginpass'); $s->begin_privileged('privilegedpass'); print $s->cmd('show access-list'); $s->end_privileged; }; if ($@) { $e = Exception::Class->caught(); ref $e ? $e->rethrow : die $e; } $s->close; DESCRIPTION Use this module to establish an interactive command-line session with a network appliance. There is special support for moving into "privileged" mode and "configure" mode, with all other commands being sent through a generic call to your session object. There are other CPAN modules that cover similar ground, including Net::SSH and Net::Telnet::Cisco, but they are quite buggy or do not handle SSH properly. Objects created by this module are based upon Net::Telnet so the majority of your interaction will be with methods in that module. It is recommended that you read the Net::Telnet manual page for further details. In this early release of "Net::Appliance::Session", only SSH connections to Cisco devices are supported, but it is hoped that further trasports (for example serial line access) and target device engines (e.g. Juniper) will be developed. METHODS Objects created by this module are based upon Net::Telnet so the majority of your interaction will be with methods in that module. The following Net::Telnet method is documented here for completeness : "Net::Appliance::Session->new" Like Net::Telnet you can supply either a single parameter to this method which is used for the target device hostname, or a list of named parameters as listed in the Net::Telnet documentation. Do not use "Net::Telnet"'s "Errmode" parameter, because it will be overridden by this module. The significant difference with this module is that the actual connection to the remote device is delayed until you "connect()". Further named arguments to those in Net::Telnet are accepted, to control behaviour specific to this module. This is discussed further, below. This method returns a new "Net::Appliance::Session" object. The following methods are provided in addition to those in Net::Telnet and all return the current "Net::Appliance::Session" object: "$s->connect" When you instantiate a new Net::Appliance::Session object the module does not actually establish a connection with the target device. This behaviour is slightly different to Net::Telnet and is because the module also needs to have login credentials. Use this method to establish that interactive session. This method requires two arguments: the login username and password. Either provide them as a pair of parameters to "connect" in that order, or as a list of named parameters using the key names "Name" and "Password" respectively. For example: $s->connect('username', 'password'); # or $s->connect(Name => 'username', Password => 'password'); In addition to logging in, "connect" will also disable paging in the output for its interactive session. This means that unlike Net::Telnet::Cisco no special page scraping logic is required in this module's code. "$s->begin_privileged" To enter privileged mode on the device use this method. Of course you must be connected to the device using the "connect" method, first. All parameters are optional, and if none are given then the login password will be used as the privileged password. If one parameter is given then it is assumed to be the privileged password. If two parameters are given then they are assumed to be the privileged username and password, respectively. If more than two parameters are given then they are interepreted as a list of named parameters using the key names "Name" and "Password" for the privileged username and password, respectively. "$s->end_privileged" To leave privileged mode and return to the unpriviledged shell then use this method. "$s->in_privileged_mode" This method will return True if your interactive session is currently in privileged (or configure) mode, and False if it is not. "$s->begin_configure" In order to enter configure mode, you must first have entered privileged mode, using the "begin_privileged" method described above. To enter configure mode on the device use this method. "$s->end_configure" To leave configure mode and return to privileged mode the use this method. "$s->in_configure_mode" This method will return True if your interactive session is currently in configure mode, and False if it is not. "$s->cmd" Ordinarily, you might use this "Net::Telnet" method in scalar context to observe whether the command was successful on the target appliance. However, this module's version "die"s if it doesn't think everything went well. See "DIAGNOSTICS" for tips on managing this using an "eval{}" construct. The following error conditions are checked on your behalf: * Incomplete command output, it was cut short for some reason * Timeout waiting for command response * EOF or other anomaly received in the command response * Error message from your appliance in the response If any of these occurs then you will get an exception with apropriately populated fields. Otherwise, in array context this method returns the command response, just as "Net::Telnet" would. In scalar context the object itself returned. Being overridden in this way means you should have no need for the "print()" and "waitfor()" methods of "Net::Telnet", although they are of course still available should you want them. The only usable method arguments are "String", "Output" and "Timeout". "$s->close" This "Net::Telnet" method has been overridden to automatically back out of configure and/or privilege mode, as well as re-enable paging mode on your behalf, as necessary. "$s->error" Rather than following the "Net::Telnet" documentation, this method now creates and throws an exception, setting the field values for you. See "DIAGNOSTICS" below for more information, however undor most circumstances it will be called automatically for you by the overridden "cmd()" method. CONFIGURATION Occasionally there is a configuration setting that is implemented through different commands on different models of device. To cope with this, Net::Appliance::Session makes use of a phrasebook in which it stores alternative syntax for various operating system platforms. The default operation of Net::Appliance::Session is to assume that the target is running a form of Cisco's IOS. Support is also available, via the "Net::Appliance::Phrasebook" module, for the following operating systems: IOS # the default Aironet # currently the same as the default PIXOS # for PIX OS-based devices (including FWSM Release 2.x) FWSM # currently the same as 'PIXOS' FWSM3 # for FWSM Release 3.x devices (slightly different to FWSM 2.x) To select a phrasebook, pass an optional parameter to the "new" method like so: my $s = Net::Appliance::Session->new( Host => 'hostname.example', Platform => 'FWSM3', ); If you want to add a new phrasebook, or edit an exiting one, there are two options. Either submit a patch to the maintaner of the "Net::Appliance::Phrasebook" module, or read the manual page for that module to find out how to use a local phrasebook rather than the builtin one. DIAGNOSTICS Firstly, if you want to see a copy of everything sent to and received from the appliance, then something like the following will probably do what you want: $s->input_log(*STDOUT); All errors returned from Net::Appliance::Session methods are Perl exceptions, meaning that in effect "die()" is called and you will need to use "eval {}". The rationale behind this is that you should have taken care to script interactive sessions robustly, and tested them thoroughly, so if a prompt is not returned or you supply incorrect parameters then it's an exceptional error. Recommended practice is to wrap your interactive session in an eval block like so: eval { $s->begin_privileged('password'); print $s->cmd('show version'); # and so on... }; if ( UNIVERSAL::isa($@,'Net::Appliance::Session::Exception') ) { print $@->message, "\n"; # fault description from Net::Appliance::Session print $@->errmsg, "\n"; # message from Net::Telnet print $@->lastline, "\n"; # last line of output from your appliance # perform any other cleanup as necessary } $s->close; Exceptions belong to the "Net::Appliance::Session::Exception" class if they result from errors internal to Net::Telnet such as lack of returned prompts, command timeouts, and so on. Alternatively exceptions will belong to "Net::Appliance::Session::Error" if you have been silly (for example missed a method parameter or tried to enter configure mode without having first entered privileged mode). All exception objects are created from "Exception::Class" and so stringify correctly and support methods as described in the manual page for that module. "Net::Appliance::Session::Exception" exception objects have two additional methods (a.k.a. fields), "errmsg" and "lastline" which contain output from Net::Telnet diagnostics. INTERNALS The guts of this module are pretty tricky, although I would also hope elegant, in parts ;-) In particular, the following "Net::Telnet" method has been overridden to modify behaviour: "Net::Appliance::Session::fhopen" The killer feature in "Net::Telnet" is that it allows you to swap out the builtin I/O target from a standard TELNET connection, to another filehandle of your choice. However, it does so in a rather intrusive way to the poor object, so this method is overridden to safeguard the instance's private data. DEPENDENCIES Other than the contents of the standard Perl distribution, you will need the following: * Exception::Class * Net::Telnet * IO::Pty * UNIVERSAL::require * Class::Accessor >= 0.25 * Class::Accessor::Fast::Contained * Net::Appliance::Phrasebook AUTHOR Oliver Gorwits "" ACKNOWLEDGEMENTS Parts of this module are based on the work of Robin Stevens and Roger Treweek. The SSH command spawning code was based on that in "Expect.pm" and is copyright Roland Giersig and/or Austin Schutz. COPYRIGHT & LICENSE Copyright (c) The University of Oxford 2006. All Rights Reserved. This program is free software; you can redistribute it and/or modify it under the terms of version 2 of the GNU General Public License as published by the Free Software Foundation. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA