NAME

    Electronics::PSU::DPSxxxx - control a DPS power supply

SYNOPSIS

       use Future::AsyncAwait;
    
       use Electronics::PSU::DPSxxxx;
    
       my $psu = Electronics::PSU::DPSxxxx->new( dev => "/dev/ttyUSB0" );
    
       await $psu->set_voltage( 1.23  ); # volts
       await $psu->set_current( 0.200 ); # amps
    
       await $psu->set_output_state( 1 ); # turn it on!

DESCRIPTION

    This module allows control of a RDTech DPS-series power supply, such as
    the DPS3005, when connected over a serial port.

 Interface Design

    The interface is currently an ad-hoc collection of whatever seems to
    work here, but my hope is to find a more generic shareable interface
    that multiple differenet modules can use, to provide interfaces to
    various kinds of electronics test equipment.

    The intention is that it should eventually be possible to write a
    script for performing automated electronics testing or experimentation,
    and easily swap out modules to suit the equipment available. Similar
    concepts apply in fields like DBI, or Device::Chip, so there should be
    plenty of ideas to borrow.

METHODS

 set_voltage

       await $psu->set_voltage( $volts );

    Sets the output voltage, in volts.

 set_current

       await $psu->set_current( $amps );

    Sets the output current, in amps.

 measure_output_voltage

       $volts = await $psu->measure_output_voltage;

    Returns the measured voltage at the output terminals, in volts.

 measure_output_current

       $amps = await $psu->measure_output_current;

    Returns the measured current at the output terminals, in amps.

 measure_input_voltage

       $volts = await $psu->measure_input_voltage;

    Returns the input voltage to the PSU module, in volts.

 set_output_state

       await $psu->set_output_state( $on );

    Switches output on / off.

 read_model

       $model = await $psu->read_model;

    Returns the model number (e.g. 3005 for DPS3005).

 read_version

       $version = await $psu->read_version;

    Returns firmware version as an integer.

AUTHOR

    Paul Evans <leonerd@leonerd.org.uk>