**************************************************** * Infortrend RAID Controller Series * * In-band SCSI Text RAID Manager for Linux * **************************************************** Version: V1.11H Dear Infortrend customer, In this directory: IAAL111H.Z - Disk image files for: In-band SCSI Text RAID Manager and SNMP extention agent for Linux Supported Operating Systems --------------------------- This Drivers and Utilities diskette can be applied to the following operating systems: Red Hat Linux 5.1 (2.00.34) Red Hat Linux 5.1 (2.00.35) SlackWare Linux 3.5 (2.00.34) The other Linux versions are not yet tested. Compatible RAID Controllers --------------------------- This driver and utilities can be applies to the following Infortrend RAID controllers: IFT-3102UA/IFT-3102UB series IFT-3102UG/IFT-3102UGN series IFT-3101UG series IFT-3101U2G series IFT-3102U2G series How to Make the Installation Diskette from the Disk Image File -------------------------------------------------------------- You may find some of the files in this directory have the same filename but with different filename extension. They are the same disk image but one of them is compressed for easy file transferring: 1) With no filename extension: This is the disk image made of unix "dd" command. To restore this disk image onto a floppy diskette, use "dd" command: # dd if=filename of=/dev/fd0 bs=1440k (where "filename" is the filename of the uncompressed disk image, "/dev/fd0" refers to the device name of the floppy drive.) 2) With filename extension ".Z": This is the disk image made of unix "dd" command, then compressed by unix "compress" command. To uncompress the compressed file, use the unix "uncompress" command: # uncompress filename.Z (where "filename.Z" is the filename of the compressed disk image. After the file has been uncompressed, the filename extension will be removed. The "filename.Z" will become "filename".) The compressed file - "filename.Z" will become uncompressed - "filename". To restore this disk image onto a floppy diskette, use "dd" command: # dd if=filename of=/dev/fd0 bs=1440k (where "filename" is the filename of the uncompressed disk image, "/dev/fd0" refers to the device name of the floppy drive.) The disk image files require a floppy drive equipped unix system to restore to a floppy diskette. Some unix systems might not have the CD-ROM drive, we provide both compressed and uncompressed disk image files for easy file transfer between two systems. Lable the Installation Diskette(s) ---------------------------------- 1. Plese refer to "How to Make the Installation Diskette from the Disk Image File" section above to create the floppy diskettes for installation. 2. Please lable the diskette made of "IAAL111H" as: +--------------------------------------+ | Infortrend RAID Controllers | | | | In-band SCSI Drivers and Utilities | | for Linux | | | | Version 1.11H | | (Code: IAAL111H) | +--------------------------------------+ Before Using In-band SCSI for Linux ----------------------------------- 1. Make sure the "generic SCSI" exists when building Linux. 2. Set proper "Peripheral Device Type" to the controller if there is no logical drive mapping to the host channel. Please refer to README.TXT in "\3102\DISK" for how to set the Peripheral Device Type to the RAID controller. 3. No extra driver software requires to be loaded. To run Text RAID Manager for Linux: ----------------------------------- 1. Insert the diskette into the floppy drive, mount it. # mount -r /dev/fd0 /mnt 2. Execute the Raidman in /tools directory. # cd /mnt/tools # ./raidman ******************* Product/Update Information ******************* For more information about Infortrend and our RAID controller products, please visit our web site: http://www.infortrend.com.tw or http://www.infortrend.com To download the latest firmware and drivers/utilities, please visit our ftp site: ftp://ftp.infortrend.com.tw or ftp://ftp.infortrend.com ******************** Support Information ************************ If you have any technical questions regarding to your RAID system, please contact your RAID system supplier first, they will provide the latest information and sincere support. ******************** Suggestions? Comments? ********************* Suggestions and comments to Infortrend RAID controller products, please send e-mail to: support@infortrend.com.tw Thank you!! Your comments are most welcome - Infortrend Development Team.