************************************
* Welcome to Infortrend FTP center *
************************************

This directory contains all the files you need for Infortrend 
stand-alone RAID controllers.


Dear Infortrend customer,

In this directory:

	\Firmware         - Controller Firmware and Boot Reocrd files
	\GUI		- Infortrend GUI RAID Manager
	\ALPHANT          - In-band SCSI Text RAID Manager for 
			  	Alpha platform Windows NT
	\DOS		- In-band SCSI Text RAID Manager for DOS
	\LINUX		- In-band SCSI Text RAID Manager for Linux
	\NETWARE          - In-band SCSI Text RAID Manager for NetWare
	\SCOOS5		- In-band SCSI Text RAID Manager for 
			  	SCO OpenServer 5
	\SOLARIS.SPK	- In-band SCSI Text RAID Manager for SUN Solaris
			  	v2.5.x/v2.6 SPRAC platform
	\SOLARIS.X86	- In-band SCSI Text RAID Manager for SUN Solaris
			  	v2.5.x/v2.6 x86 platform
	\UNIXWARE         - In-band SCSI Text RAID Manager for 
			  	SCO UnixWare 2.1.x/UnixWare 7
	\WINNT		- In-band SCSI Text RAID Manager for Windows NT
	\WIN95		- In-band SCSI Text RAID Manager for Windows 95/98



Before Using In-band SCSI - Set Peripheral Device Type
------------------------------------------------------

* In order to let the In-band SCSI utilities (Text RAID Manager or
  GUI RAID Manager) communicate with the RAID controller correctly,
  it is a must to set the corresponded Peripheral Device Type if
  there is no logical drive map to the host channel SCSI ID/LUN.

* Please refer to "Peripheral Device Type Parameters Reference for
  Various Operating Systems" table below for the settings should make.

* Please follow the following procedure to change the Peripheral
  Deive Type of the RAID controller by LCD:

1. Press <ENT> for 2 seocnds to enter the Main Menu.

2. Use UP/DOWN arrow keys to browse the menus, choose "View and Edit 
   Config Parms" and press <ENT>.

3. Browse the menu using UP/DOWN arrow keys, choose "Host-side SCSI
   Parameters", and press <ENT>.

4. Press UP/DOWN arrow keys to browse the menu until "Peripheral Dev
   Type Parameters." appears, press <ENT>.

5. "Device Type - " appears. Press <ENT> and use UP/DOWN arrow keys to
   change the setting. Refer to the reference table below and choose 
   the Peripheral Device Type corresponded to the operating system.

6. Please refer to the Instruction Manual for more detail information.



Peripheral Device Type Parameters Reference for Various Operating Systems
-------------------------------------------------------------------------


OPERATING	PERIPHERAL
SYSTEM		DEVICE
		TYPE
--------------  --------------	
Windows NT 4.0    1F
Windows 2000	3
NetWare 4.x	3
SCO OpenServer	7F
SCO UnixWare	3
Solaris v2.x	7F
Linux		3
DOS		(any one)

All the other parameters should remain default or refer to Instruction 
Manual for more detail information.



******************* Product/Update Information *******************

For more information about Infortrend and our RAID controller 
products, please visit our web site:

http://www.infortrend.com.tw  or  http://www.infortrend.com


To download the latest firmware and drivers/utilities, please visit
our ftp site:

ftp://ftp.infortrend.com.tw   or ftp://ftp.infortrend.com



******************** Support Information ************************

If you have any technical questions regarding to your RAID system,
please contact your RAID system supplier first, they will provide
the latest information and sincere support.



******************** Suggestions? Comments? *********************

Suggestions and comments to Infortrend RAID controller products, 
please send e-mail to: support@infortrend.com.tw

Thank you!!

Your comments are most welcome - Infortrend Development Team.