This program serves to calibrate most images from the Clementine Hires
camera. It does so through the use of some constants based on offset and
flat images based on filter type. There are six possible offsets, with the
resultant change being anywhere between eight and fifty to the DN. There
are four flat images, one for each of the four possible filters.
Information for this program came from JGR Vol 108, A radiometric
calibration for the Clementine Hires camera: Robinson, Malaret, White.
This parameter is used to choose either a user entered K value or a
previously set, calculated K value.
Type
string
Default
COMPUTED
Option List:
Option
Brief
Description
COMPUTED
Compute a K value from MCP gain mode
This option has the program use a known K value depending on the
MCP gain and filter type, very few MCP gain mode IDs are
supported. The K value is the absolute coefficient per wavelength
and MCP gain state.
Exclusions
KVALUE
USER
User input K value
User chooses a K value and enters it into the system. This is more
likely as very few MCP gain modes are supported.
The K value is the absolute coefficient per wavelength and MCP gain
state. This is an average of several possible K values, the default
should not be used when possible as it is an average.
