Package: ahcpd Version: 0.53-r3 Depends: libc, ip, librt License: MIT Section: net URL: https://www.irif.fr/~jch/software/ahcp/ Architecture: armeb_xscale Installed-Size: 61440 Filename: ahcpd_0.53-r3_armeb_xscale.ipk Size: 22610 SHA256sum: 897adc7793385a07a994642ebffbffd76cc424f1ed74f7852b8617540f9606c4 Description: Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. Package: alfred Version: 2024.3-r1 Depends: libc, libnl-tiny1, librt License: GPL-2.0-only MIT Section: net URL: https://www.open-mesh.org/ Architecture: armeb_xscale Installed-Size: 71680 Filename: alfred_2024.3-r1_armeb_xscale.ipk Size: 26176 SHA256sum: 4d416cc104ee70ffa253427f60ad8b11d0b7bfc2fc4e74b4e81e75659fca47de Description: alfred is a user space daemon for distributing arbitrary local information over the mesh/network in a decentralized fashion. This data can be anything which appears to be useful - originally designed to replace the batman-adv visualization (vis), you may distribute hostnames, phone books, administration information, DNS information, the local weather forecast ... alfred runs as daemon in the background of the system. A user may insert information by using the alfred binary on the command line, or use special programs to communicate with alfred (done via unix sockets). alfred then takes care of distributing the local information to other alfred servers on other nodes. This is done via IPv6 link-local multicast, and does not require any configuration. A user can request data from alfred, and will receive the information available from all alfred servers in the network. Package: babel-pinger Version: 0.1-r1 Depends: libc, librt Section: net URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/ Architecture: armeb_xscale Installed-Size: 20480 Filename: babel-pinger_0.1-r1_armeb_xscale.ipk Size: 4616 SHA256sum: 7a1323ab230e33cfc6fef7f2f9e0038bf8a5f14726954835e1333d0f52b03157 Description: Babel-pinger is a hack to export a default route into Babel for people using DHCP to configure their routers rather than speaking to their upstream provider with a proper routing protocol. Package: babeld Version: 1.13.1-r2 Depends: libc, libubus20241020, libubox20240329 License: MIT Section: net URL: https://www.irif.fr/~jch/software/babel/ Architecture: armeb_xscale Installed-Size: 133120 Filename: babeld_1.13.1-r2_armeb_xscale.ipk Size: 62816 SHA256sum: 113d4597e21f110c5f3748bf364648b849fe65b612e32959bc41f755f196c2c2 Description: Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4 with fast convergence properties. It is based on the ideas in DSDV, AODV and Cisco's EIGRP, but is designed to work well not only in wired networks but also in wireless mesh networks, and has been extended with support for overlay networks. Babel is an IETF standard protocol (RFC 8966). Package: batctl-default Version: 2024.3-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: armeb_xscale Installed-Size: 102400 Filename: batctl-default_2024.3-r1_armeb_xscale.ipk Size: 43681 SHA256sum: 638f92d097124d5fcadd80f142e5bc533f88571aa9c6bdb3cc032731ed96ee05 Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.3 of the user space utility. Standard subcommands for configuration and online debugging are enabled. Package: batctl-full Version: 2024.3-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: armeb_xscale Installed-Size: 112640 Filename: batctl-full_2024.3-r1_armeb_xscale.ipk Size: 50849 SHA256sum: 7448b251464d1b1b8b643462b23b144a9bb53f54e2ec0b4b94d750c1d0763f7d Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.3 of the user space utility. Subcommands for configuration, online and offline debugging are enabled. Package: batctl-tiny Version: 2024.3-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: armeb_xscale Installed-Size: 40960 Filename: batctl-tiny_2024.3-r1_armeb_xscale.ipk Size: 14770 SHA256sum: cd2d1b747027c6f3745b344845b227505c23f2af07fcfc9f188dc924314694de Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.3 of the user space utility. Only configuration relevant subcommands are enabled. Package: batmand Version: 1440-r1 Depends: libc, libpthread, kmod-tun License: GPL-2.0 Section: net URL: https://www.open-mesh.org/ Architecture: armeb_xscale Installed-Size: 102400 Filename: batmand_1440-r1_armeb_xscale.ipk Size: 42840 SHA256sum: 31d459a390e6c9c73b831d077bdcf8a1acd3f5e67c85c25d4208afe5a0d0360a Description: B.A.T.M.A.N. layer 3 routing daemon Package: bird2 Version: 2.15.1-r1 Depends: libc, libpthread Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: armeb_xscale Installed-Size: 983040 Filename: bird2_2.15.1-r1_armeb_xscale.ipk Size: 384033 SHA256sum: e09b0d32fb30aa97b748683a4742a00b01a1f98a16e519789558ecbc9980beb2 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and OSPFv3, RIPng, Babel and BGP protocols for IPv6. In BGP, BIRD supports communities, multiprotocol extensions, MD5 authentication, 32bit AS numbers and could act as a route server or a route reflector. BIRD also supports multiple RIBs, multiple kernel routing tables and redistribution between the protocols with a powerful configuration syntax. This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6 into a single branch, and also adds support for the Babel routing protocol. Package: bird2c Version: 2.15.1-r1 Depends: libc, bird2, libreadline8, libncurses6 Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: armeb_xscale Installed-Size: 30720 Filename: bird2c_2.15.1-r1_armeb_xscale.ipk Size: 10366 SHA256sum: 01e65b772e7ce6d11b72e38ffadff6f0120e45bdde7df58efbaaa125ad8f9e47 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. Package: bird2cl Version: 2.15.1-r1 Depends: libc, bird2 Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: armeb_xscale Installed-Size: 30720 Filename: bird2cl_2.15.1-r1_armeb_xscale.ipk Size: 9008 SHA256sum: 60c12ffffbd27c3f1861975129499d65994bb2a518087ba52beb74661c940662 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Package: bmx7-iwinfo Version: r2024061001-r1 Depends: libc, bmx7, libiwinfo20230701 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: armeb_xscale Installed-Size: 20480 Filename: bmx7-iwinfo_r2024061001-r1_armeb_xscale.ipk Size: 4838 SHA256sum: f973be64dd456b9fd34b993cd8e10d2132fbb8874d35815ca3bf206240d9f7bc Description: link characteristics plugin via libiwinfo (recommended!) Package: bmx7-json Version: r2024061001-r1 Depends: libc, bmx7, libjson-c5 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: armeb_xscale Installed-Size: 20480 Filename: bmx7-json_r2024061001-r1_armeb_xscale.ipk Size: 8478 SHA256sum: 57b32c456964e43232573ff204dc9b673c02c122a94ae49eb5589935f62140d0 Description: json plugin based on json-c Package: bmx7-sms Version: r2024061001-r1 Depends: libc, bmx7 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: armeb_xscale Installed-Size: 20480 Filename: bmx7-sms_r2024061001-r1_armeb_xscale.ipk Size: 6073 SHA256sum: f66168db210ac4adabb9c2d25b206d2f08f4a0261fe2ff202289f0d241b21aa3 Description: sms plugin Package: bmx7-table Version: r2024061001-r1 Depends: libc, bmx7, bmx7-tun License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: armeb_xscale Installed-Size: 30720 Filename: bmx7-table_r2024061001-r1_armeb_xscale.ipk Size: 10274 SHA256sum: 88fcafe7fe9bf47ead30965d07df0b4605834d63aece4d1b5549198d1a87928a Description: plugin to announce routes from tables via tunnels Package: bmx7-topology Version: r2024061001-r1 Depends: libc, bmx7 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: armeb_xscale Installed-Size: 20480 Filename: bmx7-topology_r2024061001-r1_armeb_xscale.ipk Size: 5771 SHA256sum: ba14c82a33287d7a970c325288020c57ceafb89a7a6605a4464b70c08c30326a Description: topology plugin Package: bmx7-tun Version: r2024061001-r1 Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: armeb_xscale Installed-Size: 61440 Filename: bmx7-tun_r2024061001-r1_armeb_xscale.ipk Size: 26459 SHA256sum: ffd6f18ee7d696ac5486bb9c02af54296c4db267710adf59499d609f1dd01374 Description: ipip-based tunnel plugin (recommended!) Package: bmx7-uci-config Version: r2024061001-r1 Depends: libc, bmx7, libuci20130104 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: armeb_xscale Installed-Size: 30720 Filename: bmx7-uci-config_r2024061001-r1_armeb_xscale.ipk Size: 8901 SHA256sum: b9d4bb6c3fcab6cea195e72bf6049458a5b49b971afa002f00a1c14716091523 Description: configuration plugin based on uci (recommended!) Package: bmx7 Version: r2024061001-r1 Depends: libc, zlib, libmbedtls21, libiwinfo20230701 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: armeb_xscale Installed-Size: 348160 Filename: bmx7_r2024061001-r1_armeb_xscale.ipk Size: 172244 SHA256sum: 77e03d0277203ff1496efa794222c9321a93fa424b91aeebb0941767c63807a0 Description: BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing Package: cjdns-tests Version: 21.1-r6 Depends: libc, libpthread, librt License: GPL-3.0-or-later Section: net URL: https://github.com/cjdelisle/cjdns Architecture: armeb_xscale Installed-Size: 747520 Filename: cjdns-tests_21.1-r6_armeb_xscale.ipk Size: 342578 SHA256sum: 105adeb1e7420b4795517f60d8c9e99fa5fe3a3abf82ba6f7c2b7cec1c8dfbe7 Description: cjdns test cases Package: cjdns Version: 21.1-r6 Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2 License: GPL-3.0-or-later Section: net URL: https://github.com/cjdelisle/cjdns Architecture: armeb_xscale Installed-Size: 890880 Filename: cjdns_21.1-r6_armeb_xscale.ipk Size: 397274 SHA256sum: c538fefcdbc11621ae735540bd962389174400cf02089aa9f45680d54e3487d9 Description: Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. Package: hnet-full-l2tp Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: armeb_xscale Installed-Size: 10240 Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_armeb_xscale.ipk Size: 1421 SHA256sum: aa240b55bb5f28c4f6115638681af979b85fb44df05251e34755a2b3da204194 Description: HNCP Homenet metapackage (w/ L2TP) Package: hnet-full-secure Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: armeb_xscale Installed-Size: 10240 Filename: hnet-full-secure_2018.12.21~c4376661-r1_armeb_xscale.ipk Size: 955 SHA256sum: c556653739f29bbdcc20f6f98ac8d2a54beae4946c2ae5fddf5d737640e9dd46 Description: HNCP Homenet metapackage (w/ SSL) Package: hnet-full Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: armeb_xscale Installed-Size: 10240 Filename: hnet-full_2018.12.21~c4376661-r1_armeb_xscale.ipk Size: 950 SHA256sum: 4a9d928838aa4015db14dc7a48b2e8fd770ce959d406b34501d39f4bcff7f3be Description: HNCP Homenet metapackage Package: hnetd-nossl Version: 2018.12.21~c4376661-r1 Depends: libc, odhcpd, odhcp6c, netifd License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: armeb_xscale Installed-Size: 215040 Filename: hnetd-nossl_2018.12.21~c4376661-r1_armeb_xscale.ipk Size: 94230 SHA256sum: 184354b75f0a1d19de8f63e9a207e676698d43e9ab24cb17a29c999096c82d5e Description: This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol "hnet" for use in /etc/config/network. Package: hnetd-openssl Version: 2018.12.21~c4376661-r1 Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3 License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: armeb_xscale Installed-Size: 235520 Filename: hnetd-openssl_2018.12.21~c4376661-r1_armeb_xscale.ipk Size: 103958 SHA256sum: 3c143807a44cf4bb76f713436beff3eb4305ff78ea618c43ce9ae28f81f0f3ef Description: This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol "hnet" for use in /etc/config/network. Package: luci-app-cjdns Version: 1.3-r9 Depends: libc, cjdns, luci-compat, luci-base License: GPL-3.0-or-later Section: luci URL: https://github.com/cjdelisle/cjdns Architecture: armeb_xscale Installed-Size: 40960 Filename: luci-app-cjdns_1.3-r9_armeb_xscale.ipk Size: 6586 SHA256sum: 9ea7e74c13d4979c70a97a6b3cc14228f83edb444d6ef3f7390049cec51e72ad Description: Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. Package: luci-app-hnet Version: 2018.12.21~c4376661-r1 Depends: libc License: GPL-2.0-only Section: luci Architecture: armeb_xscale Installed-Size: 235520 Filename: luci-app-hnet_2018.12.21~c4376661-r1_armeb_xscale.ipk Size: 57618 SHA256sum: 70a575904cb3e4355fcb79cfdaf673ecb12f451964d7fad1c529e9e8f6051197 Description: HNCP Homenet configuration and visualization Package: luci-app-olsrd2 Version: 0.2.6-r16 Depends: oonf-olsrd2, luci-mod-admin-full, libc Section: luci Architecture: all Installed-Size: 61440 Filename: luci-app-olsrd2_0.2.6-r16_all.ipk Size: 7783 SHA256sum: 45396eec128b51dbf2cce4ef4e75c5ca52ad48081beccca89d280646078a875d Description: OLSR2 configuration and status module Package: mesh11sd Version: 4.1.1-r1 Depends: libc License: GPL-2.0-or-later Section: net URL: https://github.com/opennds/mesh11sd Architecture: all Installed-Size: 122880 Filename: mesh11sd_4.1.1-r1_all.ipk Size: 25669 SHA256sum: ce5ac802cf56ecb81de77106fb70632fcfffa643368293ac7286b1f2283de60e Description: Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks. It was originally designed to leverage 802.11s mesh networking at Captive Portal venues. This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes. It allows all mesh parameters supported by the wireless driver to be set in the uci config file. Settings take effect immediately without having to restart the wireless network. Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted. Default settings give rapid and reliable layer 2 mesh convergence. Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set. Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes. The mesh11sd daemon can dynamically check configured parameters and set them as required. In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled, and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul. Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier. Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates. OWE Transition Mode is enabled by default on mesh gates. This version does not require a Captive Portal to be running. Package: minimalist-pcproxy Version: 2014.12.12~2d6d1b0b-r7 Depends: libc, libubox20240329 License: BSD-3-Clause Section: net URL: https://github.com/fingon/minimalist-pcproxy Architecture: armeb_xscale Installed-Size: 20480 Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_armeb_xscale.ipk Size: 7257 SHA256sum: b6a209c579b1336cf76f7452d053a0ee8c771f850694fea56be082671ac0937b Description: This package contains a daemon which can be used to forward PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers. In and of itself, it is not very useful, but combined with hnetd+miniupnpd it allows for control of NAT forwarding and firewall pinholes from multiple hops away. Package: naywatch Version: 1-r7 Depends: libc, owipcalc License: GPL-2.0-only Section: utils Architecture: all Installed-Size: 20480 Filename: naywatch_1-r7_all.ipk Size: 2852 SHA256sum: 3aa1a6b591ce1d7e6d68ae27918c99930a85b70044e59c333cd610f4ce5edc2e Description: Reboots or triggers watchdog if no link-local neighbor is available. Important: Be careful when you do a sysupgrade. Stop naywatch first, and make sure procd took control again of the watchdog. You can do this using 'ubus call system watchdog'. Status should be "running". Package: ndppd Version: 0.2.5-r2 Depends: libc, libstdcpp6 License: GPL-3.0-or-later Section: net URL: http://www.priv.nu/projects/ndppd/ Architecture: armeb_xscale Installed-Size: 81920 Filename: ndppd_0.2.5-r2_armeb_xscale.ipk Size: 32392 SHA256sum: 291b91c764bc60250b33ccc3b43b8418c9659f533e0acec0df0ee9cdf1e2230d Description: ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery Protocol) messages between interfaces. ndppd currently only supports Neighbor Solicitation Messages and Neighbor Advertisement Messages. The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts are supported. No subnets. ndppd solves this by listening for Neighbor Solicitation messages on an interface, then query the internal interfaces for that target IP before finally sending a Neighbor Advertisement message. Package: nodogsplash Version: 5.0.2-r1 Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra License: GPL-2.0-or-later Section: net URL: https://github.com/nodogsplash/nodogsplash Architecture: armeb_xscale Installed-Size: 122880 Filename: nodogsplash_5.0.2-r1_armeb_xscale.ipk Size: 47811 SHA256sum: 5ef858be2975eb6d2fe939b38950aab557add0959f3dd0700745ab1ba1521011 Description: Nodogsplash is a Captive Portal that offers a simple way to provide restricted access to the Internet by showing a splash page to the user before Internet access is granted. Package: ohybridproxy Version: 2020.05.22~0dfef1eb-r3 Depends: libc, libubox20240329, mdnsd License: GPL-2.0-only Section: net URL: https://github.com/sbyx/ohybridproxy Architecture: armeb_xscale Installed-Size: 30720 Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_armeb_xscale.ipk Size: 10995 SHA256sum: 68ba3deb16cfb7051f376de59fce7a57fdc52427a871068b73c655e204dbbb2f Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again. Package: olsrd-mod-arprefresh Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: armeb_xscale Installed-Size: 10240 Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_armeb_xscale.ipk Size: 2774 SHA256sum: bfc402d17df872983a544b162e27717a946215256d1fd9a88f1e90cbf3eb61f0 Description: Kernel ARP cache refresh plugin Package: olsrd-mod-bmf Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd, kmod-tun License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: armeb_xscale Installed-Size: 30720 Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_armeb_xscale.ipk Size: 12857 SHA256sum: 8dd076c6875cf2bb031c2ae1310529f9b967e11951ad84c326217a73f8d27058 Description: Basic multicast forwarding plugin Package: olsrd-mod-dot-draw Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: armeb_xscale Installed-Size: 20480 Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_armeb_xscale.ipk Size: 4571 SHA256sum: 51d3c9c3004613cd5738d700dbe762f6a74251fe618db11e1b5e2f26bb0a4385 Description: Dot topology information plugin Package: olsrd-mod-dyn-gw-plain Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: armeb_xscale Installed-Size: 20480 Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_armeb_xscale.ipk Size: 3090 SHA256sum: f7c9fac93c975e1f6ac8799aec1457d35449fca670bdcc46637d2654729f703a Description: Dynamic internet gateway plain plugin Package: olsrd-mod-dyn-gw Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: armeb_xscale Installed-Size: 20480 Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_armeb_xscale.ipk Size: 4752 SHA256sum: b3a881c6c30ec921558831c56837c08009a227fafca625e735fa3662994379db Description: Dynamic internet gateway plugin Package: olsrd-mod-filtergw Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: armeb_xscale Installed-Size: 20480 Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_armeb_xscale.ipk Size: 3304 SHA256sum: 1dd27fe09f644ae75d2b32dcae137610e2b6d9fc3c3753660c9cb2223c41d394 Description: Filter Gateway plugin Package: olsrd-mod-httpinfo Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: armeb_xscale Installed-Size: 81920 Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_armeb_xscale.ipk Size: 33742 SHA256sum: ce07da21941a12f689a603b2cbb7b5abccf80326bbe54ba925fa675fac870f98 Description: Small informative web server plugin Package: olsrd-mod-jsoninfo Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: armeb_xscale Installed-Size: 61440 Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_armeb_xscale.ipk Size: 25529 SHA256sum: 3c37edfc7730d39170fdbd58b7c49a4f352fed8c30977fb2dc1c5d90e4276b35 Description: Small informative plugin with JSON output Package: olsrd-mod-mdns Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: armeb_xscale Installed-Size: 30720 Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_armeb_xscale.ipk Size: 9756 SHA256sum: bf97d23829c46d1cbf1cc939a195b73a06631917d66ee7321810e361728f8612 Description: MDNS/Zeroconf/Bonjour packet distribution Package: olsrd-mod-nameservice Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: armeb_xscale Installed-Size: 30720 Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_armeb_xscale.ipk Size: 11686 SHA256sum: 30170152ee9b1db1e2bc5d892ad509e88a60e74f94ce03ad0763a57a604a37ea Description: Lightweight hostname resolver plugin Package: olsrd-mod-netjson Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: armeb_xscale Installed-Size: 40960 Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_armeb_xscale.ipk Size: 14516 SHA256sum: 9fe4c32a7e76a64e185f0386f69d3f861429f097b783bf6b6db9cdc6f40e9ba0 Description: netjson plugin with JSON output Package: olsrd-mod-p2pd Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: armeb_xscale Installed-Size: 20480 Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_armeb_xscale.ipk Size: 8984 SHA256sum: 6ef0c640a4e0091aeff462fe692d46e3dba8c4683287f3f49fbcae0923fe472b Description: Peer to Peer Discovery plugin Package: olsrd-mod-pgraph Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: armeb_xscale Installed-Size: 20480 Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_armeb_xscale.ipk Size: 3683 SHA256sum: 5e8a45c244a736f553d86497a7cad2e0967806e5ec0527d9dc08b87865207b57 Description: output network topology for pgraph Package: olsrd-mod-pud Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd, libgps30 License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: armeb_xscale Installed-Size: 184320 Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_armeb_xscale.ipk Size: 62290 SHA256sum: f225896d5bc7f1a12022f09323a8befa657f351a7dd89df6cac9af413614e89f Description: Position Update Distribution plugin Package: olsrd-mod-quagga Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: armeb_xscale Installed-Size: 20480 Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_armeb_xscale.ipk Size: 6805 SHA256sum: 09d3dd7b49dcdf3bec01ad8f478e54b6bb73df10413758089d7ee397f9323dd8 Description: Quagga plugin Package: olsrd-mod-secure Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: armeb_xscale Installed-Size: 30720 Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_armeb_xscale.ipk Size: 11131 SHA256sum: 6658901872f3365e8e5ac3a800a594496878ffc4ec402eaa7c425f51a64543c6 Description: Message signing plugin to secure routing domain Package: olsrd-mod-sgwdynspeed Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: armeb_xscale Installed-Size: 20480 Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_armeb_xscale.ipk Size: 5082 SHA256sum: 31bd9ba2f7080f34aa921f290338937c4aec923ae9bcf29ced6ba0b0dc0fc21a Description: Smart Gateway dynamic speed plugin Package: olsrd-mod-txtinfo Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: armeb_xscale Installed-Size: 40960 Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_armeb_xscale.ipk Size: 16475 SHA256sum: 1d411d9529a2d2f67cdcbc5886a2ea5f2db2dba87a4f8d25aa293f8484d3609e Description: Small informative web server plugin Package: olsrd-mod-watchdog Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: armeb_xscale Installed-Size: 10240 Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_armeb_xscale.ipk Size: 2368 SHA256sum: ed6c823a245e0f1f7a0f9aab0289806c46d3e4e94438de9475cbf88bb67247cc Description: Watchdog plugin Package: olsrd-utils Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: armeb_xscale Installed-Size: 10240 Filename: olsrd-utils_2024.06.09~d72be9ad-r1_armeb_xscale.ipk Size: 1953 SHA256sum: 38df737a85d4abb6a9689ae5692f42ba099e73af5a2b4957bca2d62542fbd7ef Description: Utils for OLSRD Package: olsrd Version: 2024.06.09~d72be9ad-r1 Depends: libc, libpthread, libubus20241020, iptables, ip6tables License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: armeb_xscale Installed-Size: 327680 Filename: olsrd_2024.06.09~d72be9ad-r1_armeb_xscale.ipk Size: 141916 SHA256sum: 3745efdcf7bbdfeb629a6c200331e40235ddf9c94abd512d4562831ed41d6e84 Description: OLSR (Optimized Link State Routing) daemon Package: oonf-dlep-proxy Version: 2022.08.25~fb15d54d Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: armeb_xscale Installed-Size: 368640 Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_armeb_xscale.ipk Size: 161984 SHA256sum: feb6b0c0cea15d2f60865673849f2c45c7189e79650bc51eb0d1b2f70025a5cd Description: Build DLEP Radio+Router Agent Package: oonf-dlep-radio Version: 2022.08.25~fb15d54d Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: armeb_xscale Installed-Size: 358400 Filename: oonf-dlep-radio_2022.08.25~fb15d54d_armeb_xscale.ipk Size: 157874 SHA256sum: 8d225839ef9cc117dca5f43b200620dbee82b87ffed4d17f232c9b10c1411869 Description: Build DLEP Radio Agent Package: oonf-init-scripts Version: 0.9.1-r3 Depends: libc Section: net URL: http://www.olsr.org/ Architecture: armeb_xscale Installed-Size: 10240 Filename: oonf-init-scripts_0.9.1-r3_armeb_xscale.ipk Size: 2302 SHA256sum: 2de3d3efb6612c4265f3d35d834e78c722b0f10fc6a80679f7b11ddab0df5495 Description: Common OONF startup scripts Package: oonf-olsrd2 Version: 2022.08.25~1cec9b21 Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: armeb_xscale Installed-Size: 532480 Filename: oonf-olsrd2_2022.08.25~1cec9b21_armeb_xscale.ipk Size: 235197 SHA256sum: f7b4b46755be491678dd316d2a9101a638d21adba1734ceba1463752863fcd5b Description: Build Olsrd V2 Routing Agent Package: opennds Version: 10.3.0-r1 Depends: libc, libmicrohttpd-no-ssl Conflicts: nodogsplash License: GPL-2.0-or-later Section: net URL: https://github.com/opennds/opennds Architecture: armeb_xscale Installed-Size: 563200 Filename: opennds_10.3.0-r1_armeb_xscale.ipk Size: 163337 SHA256sum: 7b50e266290262d91e9ce7ccd2a879515b0866c86a6f61e24b443506a876a2dc Description: openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal. It provides a border control gateway between a public local area network and the Internet. It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points. Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported. This version uses nftables. Package: pimbd Version: 2018.06.19~dbf4e591-r4 Depends: libc, netifd License: Apache-2.0 Section: net URL: https://github.com/Oryon/pimbd.git Architecture: armeb_xscale Installed-Size: 194560 Filename: pimbd_2018.06.19~dbf4e591-r4_armeb_xscale.ipk Size: 82984 SHA256sum: d675e3dddebd2f736f1fd4f4b9bedcf58373777fdfc5a99fceb0b112da62c583 Description: This package provides a daemon which implements the Protocol Independent Multicast BIDIR routing protocol. Note that a routing protocol must be installed and running in order for PIM to function. Package: prince Version: 0.4-r3 Depends: libc, libjson-c5, libpthread License: MIT Section: net URL: https://github.com/AdvancedNetworkingSystems/prince Architecture: armeb_xscale Installed-Size: 81920 Filename: prince_0.4-r3_armeb_xscale.ipk Size: 27864 SHA256sum: 02b2b4ced8cbcbba45560f23a27ebc69f591eafaa3a7fd1e25ea2de80220654a Description: Prince is an open source implementation of the PopRouting Algorithm. It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento. Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc), calculates the betweenness centrality using the topology and then computes the the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon. Since v0.4 it supports both OONF and OLSRd. Package: vis Version: 2013.04.07~7710cce4-r9 Depends: libc, libpthread License: GPL-2.0-only Section: net URL: https://www.open-mesh.org/ Architecture: armeb_xscale Installed-Size: 30720 Filename: vis_2013.04.07~7710cce4-r9_armeb_xscale.ipk Size: 11088 SHA256sum: 5f40ba578c642e4abdf40145cf2d7e62fe713eb5d24808b96911e7015d7fbd15 Description: visualization server for B.A.T.M.A.N. layer 3 Package: zonestitcher Version: 2020.05.22~0dfef1eb-r3 Depends: libc, libubox20240329 License: GPL-2.0-only Section: net URL: https://github.com/sbyx/ohybridproxy Architecture: armeb_xscale Installed-Size: 20480 Filename: zonestitcher_2020.05.22~0dfef1eb-r3_armeb_xscale.ipk Size: 8770 SHA256sum: 078faa93dbb19ca94204a46c1db20d7c41e552b345e69ad4d6e1d4dcdcdecd65 Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again.