Re: [mu Setup] - Symbol io not found (3c509 card)

From: Marco Bakera (
Date: Wed Mar 06 2002 - 14:48:40 CET

On Tue, 5 Mar 2002, Mike Peel wrote:

> I've successfuly loaded mulinux 12r2 but I can't get it to recognize my
> 3C509 card. It gives a "Symbol io not found, 3c509 is not well
> configured" error.
> I've run the 3COM supplied test/config program and set the card to 0x210
> and irq 11 , and I specify these settings in "setup -f eth0", but I
> still get the same error.

i have some problems with my ehter as well. the ne-driver from fli4l is
working finde, although its an old realtek, but the one from mulinux
doesnt work fine. even the others dont fix this. where can i get a newer
version (current 12r2) for my ether?


To unsubscribe, e-mail:
For additional commands, e-mail:

This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:21 CET