Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: powerpc_8548
Installed-Size: 81920
Filename: ahcpd_0.53-r3_powerpc_8548.ipk
Size: 27495
SHA256sum: f9398ea2322cee3345ea6ba3a51498369c25be96107bc8ec051cd664bfba3afd
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: powerpc_8548
Installed-Size: 143360
Filename: alfred_2024.3-r1_powerpc_8548.ipk
Size: 31350
SHA256sum: 399f0a4fad13d271e07129baa88ad48ffc0682bdc72b9ff39e6fdd8365948c5a
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: babel-pinger_0.1-r1_powerpc_8548.ipk
Size: 5159
SHA256sum: b85cac20dbd64c0af5f1dbdd576456ee50c7162f8a142a8eca5f42da2e9bc943
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20241020, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: powerpc_8548
Installed-Size: 215040
Filename: babeld_1.13.1-r2_powerpc_8548.ipk
Size: 77291
SHA256sum: 54c9b11367172a77f6ac3172901e371c6685daa4b2b1ab89a723c101b5a3e603
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: powerpc_8548
Installed-Size: 143360
Filename: batctl-default_2024.3-r1_powerpc_8548.ipk
Size: 50146
SHA256sum: 7c1472747c122bdfcfc7221085e67e2a61a99abefd324529780b30c157d60b86
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: powerpc_8548
Installed-Size: 204800
Filename: batctl-full_2024.3-r1_powerpc_8548.ipk
Size: 58235
SHA256sum: 38fb727f352d287dbe4a2905a9d30ad2f6d18125bc63d4ee27c68cf406553b6d
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: batctl-tiny_2024.3-r1_powerpc_8548.ipk
Size: 17682
SHA256sum: db05e306d2456f6a1bb0acf596f35b8f03090aa660d79ae3db5880aea543d054
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: powerpc_8548
Installed-Size: 143360
Filename: batmand_1440-r1_powerpc_8548.ipk
Size: 49147
SHA256sum: 9595b2889b83d7176ebc69fcf726c727fa2ece7fb521ec928c869580c26cbcee
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: powerpc_8548
Installed-Size: 1269760
Filename: bird2_2.15.1-r1_powerpc_8548.ipk
Size: 460962
SHA256sum: 79babb003b0f0321be67486497d5483062b62b4fa5843b6282f9b94b6c15dd8e
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: bird2c_2.15.1-r1_powerpc_8548.ipk
Size: 11548
SHA256sum: 3adfab3920c54e87b247e7c83abbaa46ec8345edcf3bd827e6cfe537cdd6f087
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: bird2cl_2.15.1-r1_powerpc_8548.ipk
Size: 9943
SHA256sum: 58f36378fbe1d60286153f850e7f2094afcdef6e28f260d859e50995f8e82eff
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc_8548
Installed-Size: 71680
Filename: bmx7-iwinfo_r2024061001-r1_powerpc_8548.ipk
Size: 5356
SHA256sum: 9cb0218cde4fbaf69442c9fee7d2cadeb613590cbcf19594edcfd8a090a41eff
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc_8548
Installed-Size: 71680
Filename: bmx7-json_r2024061001-r1_powerpc_8548.ipk
Size: 10041
SHA256sum: dadedaf12823a325600e2eb6cc94ab4fc64b10d5322875b137ef7382414a7a21
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc_8548
Installed-Size: 71680
Filename: bmx7-sms_r2024061001-r1_powerpc_8548.ipk
Size: 7307
SHA256sum: 9c5c4169dec0b0b5d077e4944edaa1ecf314d83644779a234eeff3c39e52de8e
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc_8548
Installed-Size: 71680
Filename: bmx7-table_r2024061001-r1_powerpc_8548.ipk
Size: 12182
SHA256sum: b6a2110bfa6846888c34c5ecb1807f2c0358a4b22a06ed4f9a44b0e781b41a54
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc_8548
Installed-Size: 71680
Filename: bmx7-topology_r2024061001-r1_powerpc_8548.ipk
Size: 6935
SHA256sum: f540d76c6731d6967e6818e11d09725a70dc9da946476fef21246e24712e7949
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc_8548
Installed-Size: 143360
Filename: bmx7-tun_r2024061001-r1_powerpc_8548.ipk
Size: 30788
SHA256sum: 82e224715460823e2ef75b2e8ae5198e0c17eb6a2ee7b9e3be307126a2063d82
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc_8548
Installed-Size: 81920
Filename: bmx7-uci-config_r2024061001-r1_powerpc_8548.ipk
Size: 9951
SHA256sum: 51b4b1685b8975f03d29f58afd99d6d7e2f8a8afa503c308877b1bc662134fcd
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: powerpc_8548
Installed-Size: 481280
Filename: bmx7_r2024061001-r1_powerpc_8548.ipk
Size: 194326
SHA256sum: e0f1a848fc1ebb10126a4014c5b38176b12a455e212b103b873f746cd407578a
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: powerpc_8548
Installed-Size: 962560
Filename: cjdns-tests_21.1-r6_powerpc_8548.ipk
Size: 380683
SHA256sum: 896dd1dc7de50991d488612fd66efb0310de68bfb33555383bf649b56d079fc6
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: powerpc_8548
Installed-Size: 1126400
Filename: cjdns_21.1-r6_powerpc_8548.ipk
Size: 450224
SHA256sum: 4fde8ff9166fb716cbae5d3232be33fb28862080a131d3dd408d5e2abb51b4ff
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: powerpc_8548
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_powerpc_8548.ipk
Size: 1421
SHA256sum: 922e703fcb38bbc7ac7ede971a4f44945e8a7d66d60f6259d94214eddf914d15
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: powerpc_8548
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_powerpc_8548.ipk
Size: 954
SHA256sum: ab727b97699be402f05e96ece6120f0544b4cab2610f30df42eeb479f624f226
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: powerpc_8548
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_powerpc_8548.ipk
Size: 949
SHA256sum: f9537d706ec8df686f8456e63053d55d6e8c04f0f963b2df0bb44966b38cc4f1
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: powerpc_8548
Installed-Size: 296960
Filename: hnetd-nossl_2018.12.21~c4376661-r1_powerpc_8548.ipk
Size: 114365
SHA256sum: 652f5085c4f06f5d0b3fc6e9a346db0bc8cbace9a269c4da3736763c926d92b3
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: powerpc_8548
Installed-Size: 368640
Filename: hnetd-openssl_2018.12.21~c4376661-r1_powerpc_8548.ipk
Size: 126860
SHA256sum: bf4a6d008ae61d12082955f43bd4a62a42f37df405dd3c0b52f7269b3f139154
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: powerpc_8548
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_powerpc_8548.ipk
Size: 6592
SHA256sum: a47641daa336a1881e49925fa3417b1195a093f2ade3b3f43febc77b399fdb5d
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: powerpc_8548
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_powerpc_8548.ipk
Size: 57618
SHA256sum: 89e384caf7ed0ed9cea7c2c1cbcf5279fef23b22dbf9e8ab7d23c18ad86df8c3
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7783
SHA256sum: 45396eec128b51dbf2cce4ef4e75c5ca52ad48081beccca89d280646078a875d
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25669
SHA256sum: ce5ac802cf56ecb81de77106fb70632fcfffa643368293ac7286b1f2283de60e
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: powerpc_8548
Installed-Size: 71680
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_powerpc_8548.ipk
Size: 8818
SHA256sum: 56467fab4d6a47eaf185127ac89c04918b53076bba14e9f3cd784a741eed476f
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2852
SHA256sum: 3aa1a6b591ce1d7e6d68ae27918c99930a85b70044e59c333cd610f4ce5edc2e
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: powerpc_8548
Installed-Size: 143360
Filename: ndppd_0.2.5-r2_powerpc_8548.ipk
Size: 35568
SHA256sum: a9eedb10d08e482903a9e8a29a08f6495603e7f8a46afccff7ed296f27f3d791
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: powerpc_8548
Installed-Size: 235520
Filename: nodogsplash_5.0.2-r1_powerpc_8548.ipk
Size: 51752
SHA256sum: 441bb60ff56cff6a921c8c41b320427355a9f54f34e37b0048419e8eb3f326a0
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: powerpc_8548
Installed-Size: 81920
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_powerpc_8548.ipk
Size: 13648
SHA256sum: f4fbfaae5b531cd0227e621a22313bcfbeecf6c56b7d5cd39d6ba66b0ff79d43
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 3147
SHA256sum: a0abdbf276054cb3fd559c6174e5d7af9c2c55371acd7f08347955d474ad5bfa
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 15196
SHA256sum: d519f7164d2dbe05c38e6d2acca8b792a832d51ca0960ca044d8f00627dd74ac
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 5283
SHA256sum: 6bdecc2d3f8e1c8832e213e59fb74ecbe52eb78a2a360df60c04b5707eeb6374
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 3670
SHA256sum: dc58e3ba4f211487f491d390a97872b2ad6e8e317a50b1be6ddd7f7e319eb21a
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 5648
SHA256sum: f1b4f5a46abfede1ae172bfd8c245144be36783103c57596faeef6893caa9a17
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 3869
SHA256sum: 4a3fe5526bad7cec45173ff883a82febcd82bcbf8c00676e6522918bd0480ec4
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 143360
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 34388
SHA256sum: 4d058ab5a4ab1faf3a0ff806fb4744efb774b5310a76b5cbb9bc29d8e08a9bdd
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 143360
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 26910
SHA256sum: 4ca47851839450cd9078ee7dc508f3b14f20fbdee62e4cf848f986c041a880a5
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 11642
SHA256sum: 71ebc3778df5db5229f69db61760fe1e03a78f9e676447941afc491f79e7b3b8
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 13785
SHA256sum: 7138720aa9989ad2263ac439342cda6971c80d244cf0e42139ce773cc9a365d4
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 15796
SHA256sum: 950d294e7084d6e2a939decc48f3ce36c7a961090c88731457067f857eb61189
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 11354
SHA256sum: 0fa38dacc31eeb5d3f3245e241757aa4366b0f3e4a3adddd746c5eae78ce03b2
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 4115
SHA256sum: be99eb0baf829a97d24b270664660e34c2629e3a0c8c0327dd165174bf3a3361
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 337920
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 72701
SHA256sum: 58c1319b9f030e441fa622b0b289658745fe4c39c61ae812c68ee3f32da8bdad
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 8630
SHA256sum: 324fdf3ad47088a13463d6ece10b87d0a54fd7bc4a7b85edb9d84c3ddfd60f71
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 12499
SHA256sum: 159bb39048ef5c2d5c573142cd45ea792528992c484a78ea1f80c1392634721a
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 6210
SHA256sum: a31f58dd498af19b133da7eac552d6a8f6a5c6a14dad38cbdefb3c3d9bb8adde
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 17914
SHA256sum: e63b235e9de5bc2c6fcd123366ff22329fa8798a93bf2b2c62411080f9ab93ac
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 71680
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 2797
SHA256sum: 15b09193dffc326ce44c9f3fd4f585292a954d603a5e7a1475765633952aa19b
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 1951
SHA256sum: 0e5ad5653edc23b6ebcf3b31ce585abb1f33c37f4160ec592b501215b8128f83
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20241020, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 430080
Filename: olsrd_2024.06.09~d72be9ad-r1_powerpc_8548.ipk
Size: 153787
SHA256sum: e6e07d493f90e6268eb932e38b52f619ec6b65d436786c868619f8214d6f175c
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 563200
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_powerpc_8548.ipk
Size: 216882
SHA256sum: 0b169969f671e9792f501268dbf820ab27f237167e51d0ec2af98173f01e7b6c
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 552960
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_powerpc_8548.ipk
Size: 210890
SHA256sum: a156ddfa287b5764f99fbbea46e03c073097aaf4801cdcb798153152251570ab
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_powerpc_8548.ipk
Size: 2299
SHA256sum: 232e6fd399d376c2d790f890da5238eebe775e749f730293094a62fe0855000c
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: powerpc_8548
Installed-Size: 829440
Filename: oonf-olsrd2_2022.08.25~1cec9b21_powerpc_8548.ipk
Size: 313970
SHA256sum: 2e8f9067e1a3a73715ba780f0166e28d63cb2cb41071a1f0af5ce54e20635d44
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: powerpc_8548
Installed-Size: 696320
Filename: opennds_10.3.0-r1_powerpc_8548.ipk
Size: 166883
SHA256sum: 601dd28c41ff4d9855a3fcc7036eca04a09c868d5b4bb6b21b9386b1d12cdbda
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: powerpc_8548
Installed-Size: 286720
Filename: pimbd_2018.06.19~dbf4e591-r4_powerpc_8548.ipk
Size: 90439
SHA256sum: bda5f0d1e29d05e01567ecc3ef6daf4e85beff8ae6a79322e9413fe6efb0f63e
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: powerpc_8548
Installed-Size: 204800
Filename: prince_0.4-r3_powerpc_8548.ipk
Size: 45852
SHA256sum: b7bedba4b3aac762746e0648ae66fd8064120aa16df38dfb84c777c0e051593c
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: powerpc_8548
Installed-Size: 81920
Filename: vis_2013.04.07~7710cce4-r9_powerpc_8548.ipk
Size: 13333
SHA256sum: 2d9fe011980f1988a342ed51631c33faf95428dd7150ba679a7100e06814d567
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: powerpc_8548
Installed-Size: 71680
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_powerpc_8548.ipk
Size: 11236
SHA256sum: 1ba082e76ba5f208f2aedbd9f156912b3502fc5f1d95dfa41a159fecbf6cfc9f
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.