MTRR (Memory Type Range Register) control 2 May 1998 Richard Gooch On Intel Pentium Pro/Pentium II systems the Memory Type Range Registers (MTRRs) may be used to control processor access to memory ranges. This is most useful when you have a video (VGA) card on a PCI or AGP bus. Enabling write-combining allows bus write transfers to be combined into a larger transfer before bursting over the PCI/AGP bus. This can increase performance of image write operations 2.5 times or more. The CONFIG_MTRR option creates a /proc/mtrr file which may be used to manipulate your MTRRs. Typically the X server should use this. This should have a reasonably generic interface so that similar control registers on other processors can be easily supported. There are two interfaces to /proc/mtrr: one is an ASCII interface which allows you to read and write. The other is an ioctl() interface. The ASCII interface is meant for administration. The ioctl() interface is meant for C programmes (i.e. the X server). The interfaces are described below, with sample commands and C code. =============================================================================== Reading MTRRs from the shell: % cat /proc/mtrr reg00: base=0x00000000 ( 0MB), size= 128MB: write-back, count=1 reg01: base=0x08000000 ( 128MB), size= 64MB: write-back, count=1 =============================================================================== Creating MTRRs from the shell: # echo "base=0xf8000000 size=0x400000 type=write-combining" >! /proc/mtrr And the result thereof: % cat /proc/mtrr reg00: base=0x00000000 ( 0MB), size= 128MB: write-back, count=1 reg01: base=0x08000000 ( 128MB), size= 64MB: write-back, count=1 reg02: base=0xf8000000 (3968MB), size= 4MB: write-combining, count=1 This is for video RAM at base address 0xf8000000 and size 4 megabytes. To find out your base address, you need to look at the output of your X server, which tells you where the linear framebuffer address is. A typical line that you may get is: (--) S3: PCI: 968 rev 0, Linear FB @ 0xf8000000 Note that you should only use the value from the X server, as it may move the framebuffer base address, so the only value you can trust is that reported by the X server. To find out the size of your framebuffer (what, you don't actually know?), the following line will tell you: (--) S3: videoram: 4096k That's 4 megabytes, which is 0x400000 bytes (in hexadecimal). A patch is being written for XFree86 which will make this automatic: in other words the X server will manipulate /proc/mtrr using the ioctl() interface, so users won't have to do anything. If you use a commercial X server, lobby your vendor to add support for MTRRs. =============================================================================== Creating overlapping MTRRs: %echo "base=0xfb000000 size=0x1000000 type=write-combining" >/proc/mtrr %echo "base=0xfb000000 size=0x1000 type=uncachable" >/proc/mtrr And the results: cat /proc/mtrr reg00: base=0x00000000 ( 0MB), size= 64MB: write-back, count=1 reg01: base=0xfb000000 (4016MB), size= 16MB: write-combining, count=1 reg02: base=0xfb000000 (4016MB), size= 4kB: uncachable, count=1 Some cards (especially Voodoo Graphics boards) need this 4 kB area excluded from the beginning of the region because it is used for registers. NOTE: You can only create type=uncachable region, if the first region that you created is type=write-combining. =============================================================================== Removing MTRRs from the shell: % echo "disable=2" >! /proc/mtrr =============================================================================== Reading MTRRs from a C programme using ioctl()'s: /* mtrr-show.c Source file for mtrr-show (example programme to show MTRRs using ioctl()'s) Copyright (C) 1997-1998 Richard Gooch This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. Richard Gooch may be reached by email at rgooch@atnf.csiro.au The postal address is: Richard Gooch, c/o ATNF, P. O. Box 76, Epping, N.S.W., 2121, Australia. */ /* This programme will use an ioctl() on /proc/mtrr to show the current MTRR settings. This is an alternative to reading /proc/mtrr. Written by Richard Gooch 17-DEC-1997 Last updated by Richard Gooch 2-MAY-1998 */ #include #include #include #include #include #include #include #define MTRR_NEED_STRINGS #include #define TRUE 1 #define FALSE 0 #define ERRSTRING strerror (errno) int main () { int fd; struct mtrr_gentry gentry; if ( ( fd = open ("/proc/mtrr", O_RDONLY, 0) ) == -1 ) { if (errno == ENOENT) { fputs ("/proc/mtrr not found: not supported or you don't have a PPro?\n", stderr); exit (1); } fprintf (stderr, "Error opening /proc/mtrr\t%s\n", ERRSTRING); exit (2); } for (gentry.regnum = 0; ioctl (fd, MTRRIOC_GET_ENTRY, &gentry) == 0; ++gentry.regnum) { if (gentry.size < 1) { fprintf (stderr, "Register: %u disabled\n", gentry.regnum); continue; } fprintf (stderr, "Register: %u base: 0x%lx size: 0x%lx type: %s\n", gentry.regnum, gentry.base, gentry.size, mtrr_strings[gentry.type]); } if (errno == EINVAL) exit (0); fprintf (stderr, "Error doing ioctl(2) on /dev/mtrr\t%s\n", ERRSTRING); exit (3); } /* End Function main */ =============================================================================== Creating MTRRs from a C programme using ioctl()'s: /* mtrr-add.c Source file for mtrr-add (example programme to add an MTRRs using ioctl()) Copyright (C) 1997-1998 Richard Gooch This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. Richard Gooch may be reached by email at rgooch@atnf.csiro.au The postal address is: Richard Gooch, c/o ATNF, P. O. Box 76, Epping, N.S.W., 2121, Australia. */ /* This programme will use an ioctl() on /proc/mtrr to add an entry. The first available mtrr is used. This is an alternative to writing /proc/mtrr. Written by Richard Gooch 17-DEC-1997 Last updated by Richard Gooch 2-MAY-1998 */ #include #include #include #include #include #include #include #include #include #define MTRR_NEED_STRINGS #include #define TRUE 1 #define FALSE 0 #define ERRSTRING strerror (errno) int main (int argc, char **argv) { int fd; struct mtrr_sentry sentry; if (argc != 4) { fprintf (stderr, "Usage:\tmtrr-add base size type\n"); exit (1); } sentry.base = strtoul (argv[1], NULL, 0); sentry.size = strtoul (argv[2], NULL, 0); for (sentry.type = 0; sentry.type < MTRR_NUM_TYPES; ++sentry.type) { if (strcmp (argv[3], mtrr_strings[sentry.type]) == 0) break; } if (sentry.type >= MTRR_NUM_TYPES) { fprintf (stderr, "Illegal type: \"%s\"\n", argv[3]); exit (2); } if ( ( fd = open ("/proc/mtrr", O_WRONLY, 0) ) == -1 ) { if (errno == ENOENT) { fputs ("/proc/mtrr not found: not supported or you don't have a PPro?\n", stderr); exit (3); } fprintf (stderr, "Error opening /proc/mtrr\t%s\n", ERRSTRING); exit (4); } if (ioctl (fd, MTRRIOC_ADD_ENTRY, &sentry) == -1) { fprintf (stderr, "Error doing ioctl(2) on /dev/mtrr\t%s\n", ERRSTRING); exit (5); } fprintf (stderr, "Sleeping for 5 seconds so you can see the new entry\n"); sleep (5); close (fd); fputs ("I've just closed /proc/mtrr so now the new entry should be gone\n", stderr); } /* End Function main */ ===============================================================================