%
% NOTE -- ONLY EDIT THE .Rnw FILE!!!  The .tex file is
% likely to be overwritten.
%

%\VignetteIndexEntry{managing multiple NGS samples with bamViews}
%\VignetteDepends{Biobase, Rsamtools}
%\VignetteKeywords{NGS}
%\VignettePackage{leeBamViews}

\documentclass[12pt]{article}

\usepackage{amsmath,pstricks}
\usepackage[authoryear,round]{natbib}
\usepackage{hyperref}


\textwidth=6.2in
\textheight=8.5in
%\parskip=.3cm
\oddsidemargin=.1in
\evensidemargin=.1in
\headheight=-.3in

\newcommand{\scscst}{\scriptscriptstyle}
\newcommand{\scst}{\scriptstyle}


\newcommand{\Rfunction}[1]{{\texttt{#1}}}
\newcommand{\Robject}[1]{{\texttt{#1}}}
\newcommand{\Rpackage}[1]{{\textit{#1}}}
\newcommand{\Rmethod}[1]{{\texttt{#1}}}
\newcommand{\Rfunarg}[1]{{\texttt{#1}}}
\newcommand{\Rclass}[1]{{\textit{#1}}}

\textwidth=6.2in

\bibliographystyle{plainnat} 
 
\begin{document}
%\setkeys{Gin}{width=0.55\textwidth}


\title{Managing and analyzing multiple NGS samples with Bioconductor bamViews objects:
application to RNA-seq}
\author{VJ Carey}
\maketitle

\tableofcontents

\clearpage

\section{Introduction}
We consider a lightweight approach to Bioconductor-based management and
interrogation of multiple samples to which NGS methods have been applied.

The basic data store is the binary SAM (BAM) format \citep{Li:2009p1146}.
This format is widely used in the 1000 genomes project, and transformations
between SAM/BAM and output formats of various popular alignment programs
are well-established. Bioconductor's \Rpackage{Rsamtools} package allows
direct use of important SAM data interrogation facilities from R.

\section{Basic design}
A collection of NGS samples is represented through the associated set
of BAM files and BAI index files. These can be stored in the inst/bam
folder of an R package to facilitate documented programmatic access
through R file navigation facilities, or the BAM/BAI files can be
accessed through arbitrary path or URL references.

The bamViews class is defined to allow reliable fine-grained  access to
the NGS data along with relevant metadata. A bamViews instance contains
access path information for a set of related BAM/BAI files, along with
sample metadata and an optional specification of genomic ranges of
interest.

A key design aspect of the bamViews class is preservation of
semantics of the \texttt{X[G, S]} idiom familiar from
\Rclass{ExpressionSet} objects for management of multiple microarrays.
With \Robject{ExpressionSet} instances, \texttt{G} is a predicate
specifying selection of microarray probes of interest. With
\Rclass{bamViews} instances, \texttt{G} is a predicate specifying
selection of genomic features of interest. At present, for
\Rclass{bamViews}, selection using \texttt{G} involves ranges of
genomic coordinates.

\section{Illustration}

Data from four samples from a yeast RNA-seq experiment (two wild type,
two `RLP' mutants) are organized in the \Rpackage{leeBamViews} package.
The data are collected to allow regeneration of aspects of Figure 8 of
\citet{Lee:2008p932}.
We obtained all reads between bases 800000 and 900000 of yeast chromosome
XIII.

We have not yet addressed durable serialization of manager objects,
so the \Rclass{bamViews} instance is created on the fly.
<<lkd,keep.source=TRUE>>=
library(leeBamViews)  # bam files stored in package
bpaths = dir(system.file("bam", package="leeBamViews"), full=TRUE, patt="bam$")
#
# extract genotype and lane information from filenames
#
gt = gsub(".*/", "", bpaths)
gt = gsub("_.*", "", gt)
lane = gsub(".*(.)$", "\\1", gt)
geno = gsub(".$", "", gt)
#
# format the sample-level information appropriately
#
pd = DataFrame(geno=geno, lane=lane, row.names=paste(geno,lane,sep="."))
prd = new("DataFrame")  # protocol data could go here
#
# create the views object, adding some arbitrary experiment-level information
#
bs1 = BamViews(bamPaths=bpaths, bamSamples=pd, 
        bamExperiment=list(annotation="org.Sc.sgd.db"))
bs1
#
# get some sample-level data
#
bamSamples(bs1)$geno
@

We would like to operate on specific regions of chr XIII for all
samples. Note that the aligner in use (bowtie) employed ``Scchr13''
to refer to this chromosome. We add a \Rclass{GRanges} instance to
the view to identify the region of interest.
<<lkc>>=
START=c(861250, 863000)
END=c(862750, 864000)
exc = GRanges(seqnames="Scchr13", IRanges(start=START, end=END), strand="+")
bamRanges(bs1) = exc
bs1
@

A common operation will be to extract coverage information. We use
a transforming method, \Rfunction{readGappedAlignments}, from the
\Rpackage{GenomicRanges} package to extract reads and metadata for
each region and each sample.
@
<<lkcov>>=
covex =
  RleList(lapply(bamPaths(bs1), function(x)
                 coverage(readGappedAlignments(x))[["Scchr13"]]))
names(covex) = gsub(".bam$", "", basename(bamPaths(bs1)))
head(covex, 3)
@

Let's visualize what we have so far. We use \Rpackage{GenomeGraphs}
and add some supporting software.
<<addso>>=
library(GenomeGraphs)
cov2baseTrack = function(rle, start, end,
   dp = DisplayPars(type="l", lwd=0.5, color="black"),
   countTx=function(x)log10(x+1)) {
 require(GenomeGraphs)
 if (!is(rle, "Rle")) stop("requires instance of Rle")
 dat = runValue(rle)
 loc = cumsum(runLength(rle))
 ok = which(loc >= start & loc <= end)
 makeBaseTrack(base = loc[ok], value=countTx(dat[ok]),
    dp=dp)
}
trs = lapply(covex, function(x) cov2baseTrack(x, START[1], END[1],
   countTx = function(x)pmin(x, 80)))
ac = as.character
names(trs) = paste(ac(bamSamples(bs1)$geno), ac(bamSamples(bs1)$lane), sep="")
library(biomaRt)
mart = useMart("ensembl", "scerevisiae_gene_ensembl")
gr = makeGeneRegion(START, END, chromosome="XIII",
  strand="+", biomart=mart, dp=DisplayPars(plotId=TRUE,
  idRotation=0, idColor="black"))
trs[[length(trs)+1]] = gr
trs[[length(trs)+1]] = makeGenomeAxis()
@
<<lkf,fig=TRUE>>=
print( gdPlot( trs, minBase=START[1], maxBase=END[1]) )
@

We can encapsulate this to something like:
<<mkps,eval=FALSE>>=
plotStrains = function(bs, query, start, end, snames, mart, chr, strand="+") {
 filtbs = bs[query, ]
 cov = lapply(filtbs, coverage)
 covtrs = lapply(cov, function(x) cov2baseTrack(x[[1]], start, end,
   countTx = function(x) pmin(x,80)))
 names(covtrs) = snames
 gr = makeGeneRegion(start, end, chromosome=chr,
       strand=strand, biomart=mart, dp=DisplayPars(plotId=TRUE,
       idRotation=0, idColor="black"))
 grm = makeGeneRegion(start, end, chromosome=chr,
       strand="-", biomart=mart, dp=DisplayPars(plotId=TRUE,
       idRotation=0, idColor="black"))
 covtrs[[length(covtrs)+1]] = gr
 covtrs[[length(covtrs)+1]] = makeGenomeAxis()
 covtrs[[length(covtrs)+1]] = grm
 gdPlot( covtrs, minBase=start, maxBase=end )
}
@
 
%\begin{verbatim}
%> NN = RangesList("Scchr03"=IRanges(start=174500,end=177750))
%> plotStrains(bs1, NN, 174500, 177500, letters[1:4], mart, "III")
%\end{verbatim}

\section{Comparative counts in a set of regions of interest}

\subsection{Counts in a regular partition}

The supplementary information for the Lee paper includes data on
unnannotated transcribed regions reported in other studies. We
consider the study of David et al., confining attention to
chromosome XIII. If you wanted to study their intervals you could
use code like:
<<lkda,eval=FALSE>>=
data(leeUnn)
names(leeUnn)
leeUnn[1:4,1:8]
table(leeUnn$study)
l13 = leeUnn[ leeUnn$chr == 13, ]
l13d = na.omit(l13[ l13$study == "David", ])
d13r = GRanges(seqnames="Scchr13", IRanges( l13d$start, l13d$end ),
  strand=ifelse(l13d$strand==1, "+", ifelse(l13d$strand=="0", "*", "-")))
elementMetadata(d13r)$name = paste("dav13x", 1:length(d13r), sep=".")
bamRanges(bs1) = d13r
d13tab = tabulateReads( bs1 )
@
but our object  \Robject{bs1} is too restricted in its coverage.
Instead, we illustrate with a small set of subintervals of the
basic interval in use:
<<makn,eval=TRUE>>=
myrn = GRanges(seqnames="Scchr13",
  IRanges(start=seq(861250, 862750, 100), width=100), strand="+")
elementMetadata(myrn)$name = paste("til", 1:length(myrn), sep=".")
bamRanges(bs1) = myrn
tabulateReads(bs1, "+")
@

\subsection{Counts in annotated intervals: genes}

We can use Bioconductor annotation resources to acquire boundaries of
yeast genes on our subregion of chromosome 13.

In the following chunk we generate annotated ranges of genes on the
Watson strand.
<<ddee,keep.source=TRUE>>=
library(org.Sc.sgd.db)
library(IRanges)
c13g = get("13", revmap(org.Sc.sgdCHR))  # all genes on chr13
c13loc = unlist(mget(c13g, org.Sc.sgdCHRLOC))  # their 'start' addresses
c13locend = unlist(mget(c13g, org.Sc.sgdCHRLOCEND))
c13locp = c13loc[c13loc>0]     # confine attention to + strand
c13locendp = c13locend[c13locend>0]
ok = !is.na(c13locp) & !is.na(c13locendp)
c13pr = GRanges(seqnames="Scchr13", IRanges(c13locp[ok], c13locendp[ok]),
    strand="+")   # store and clean up names
elementMetadata(c13pr)$name = gsub(".13$", "", names(c13locp[ok]))
c13pr
c13pro = c13pr[ order(ranges(c13pr)), ]
@

That's the complete set of genes on the Watson strand of chromosome XIII.
In the \Rpackage{leeBamViews} package, we do not have access to all these,
but only those lying in a 100kb interval. 
<<dolim>>=
lim = GRanges(seqnames="Scchr13", IRanges(800000,900000), strand="+")
c13prol = c13pro[ which(c13pro %in% lim ), ]
@

Now that we have a set of annotation-based genomic regions, we can tabulate
read counts lying in those regions and obtain an annotated matrix.

<<getm,eval=TRUE>>=
bamRanges(bs1) = c13prol
annotab = tabulateReads(bs1, strandmarker="+")
@

\section{Larger scale sanity check}

The following plot compares read counts published with the Lee et al.
(2008) paper to those computed by the methods sketched here, for all
regions noted on the plus strand of chromosome XIII. Exact
correspondence is not expected because of different approaches to read
filtering.

\begin{center}
\includegraphics{leeFull-dol}
\end{center}

\section{Statistical analyses of differential expression}

\subsection{Using edgeR}

Statistical analysis of read counts via negative binomial distributions
with moderated dispersion is developed in \citet{Robinson:2008p548}.
The \Rpackage{edgeR} differential expression statistics are computed
using regional read counts, and total library size plays a role. We
compute total read counts directly (the operation can be somewhat slow
for very large BAM files):
<<gettot,eval=TRUE>>=
totcnts = totalReadCounts(bs1)
@ 
In the following demonstration, we will regard multiple lanes from the
same genotype as replicates. This is probably inappropriate for this
method; the original authors tested for lane effects and ultimately
combined counts across lanes within strain.

<<lkedd,eval=TRUE,keep.source=TRUE>>=
library(edgeR)
#
# construct an edgeR container for read counts, including 
#   genotype and region (gene) metadata
#
dgel1 = DGEList( counts=t(annotab)[,-c(1,2)], 
   group=factor(bamSamples(bs1)$geno),
   lib.size=totcnts, genes=colnames(annotab))
#
# compute a dispersion factor for the negative binomial model
#
cd = estimateCommonDisp(dgel1)
#
# test for differential expression between two groups
# for each region
#
et12 = exactTest(cd)
#
# display statistics for the comparison
#
tt12 = topTags(et12)
tt12
@

An analog of the ``MA-plot'' familiar from microarray studies is
available for this analysis. The `concentration' is the log
proportion of reads present in each gene, and the ``log fold change''
is the model-based estimate of relative abundance. In the following
display we label the top 10 genes (those with smallest FDR).

<<lkma,fig=TRUE>>=
plotSmear(cd, cex=.8, ylim=c(-10,10))
text(tt12$table$logConc, tt12$table$logFC+.15, as.character(
  tt12$table$genes), cex=.65)
@


\section{Summary}
\begin{itemize}
\item The BAM format provides reasonably compact and comprehensive
information about a alignments of short reads obtained in a sequencing
experiment. samtools utilities permit efficient random access to read
collections of interest.
\item \Rpackage{Rsamtools} brings samtools functionality into R,
principally through the \Rfunction{scanBam} method, which is richly
parameterized so that many details of access to and filtering of reads
from BAM files can be controlled in R.
\item \Rpackage{Rsamtools} defines the \Rclass{bamViews} container for
management of collections of BAM files. Read data are managed external
to R; data on aligned reads can be imported efficiently, and
``streaming read'' models for scanning large collections of reads can
be used. Many embarrassingly parallel operations can be accomplished
concurrently using \Rpackage{multicore} or similar packages.
\item The \Rpackage{leeBamViews} package provides small excerpts from
BAM files generated after bowtie alignment of FASTQ records available
through the NCBI short read archives. These excerpts can be analyzed
using code shown in this vignette.
\item After the count data have been generated, various approaches
to inference on differential expression are available. We consider
the moderated negative binomial models of \Rpackage{edgeR} above;
more general variance modeling is available in the developmental
\Rpackage{DESeq} package.
\end{itemize}

\bibliography{robb}

\section{Session data}

<<lks,eval=TRUE>>=
sessionInfo()
@


\end{document}
