A framework to discover Spatially Variable genes via spatial clusters
04/25/2023
Contents
1 Introduction
DESpace is an intuitive framework for identifying spatially variable (SV) genes (SVGs) via edgeR (Robinson, McCarthy, and Smyth 2009), one of the most common methods for performing differential expression analyses.
Based on pre-annotated spatial clusters as summarized spatial information, DESpace models gene expression using a negative binomial (NB), via edgeR (Robinson, McCarthy, and Smyth 2009), with spatial clusters as covariates. SV genes (SVGs) are then identified by testing the significance of spatial clusters.
Our approach assumes that the spatial structure can be summarized by spatial clusters, which should reproduce the key features of the tissue (e.g., white matter and layers in brain cortex). A significant test of these covariates indicates that space influences gene expression, hence identifying spatially variable genes.
Our model is flexible and robust, and is significantly faster than the most SV methods. Furthermore, to the best of our knowledge, it is the only SV approach that allows: - performing a SV test on each individual spatial cluster, hence identifying the key regions affected by spatial variability; - jointly fitting multiple samples, targeting genes with consistent spatial patterns across biological replicates.
Below, we illustrate en example usage of the package.
2 Basics
DESpace is implemented as a R package within Bioconductor, which is the main venue for omics analyses, and we use various other Bioconductor packages (e.g., SpatialLIBD, and edgeR).
DESpace package is available on Bioconductor and can be installed with the following command:
if (!requireNamespace("BiocManager", quietly = TRUE)) {
install.packages("BiocManager")
}
BiocManager::install("DESpace")
## Check that you have a valid Bioconductor installation
BiocManager::valid()The development version of DESpacecan also be installed from the Bioconductor-devel branch or from GitHub.
To access the R code used in the vignettes, type:
browseVignettes("DESpace")Questions relative to DESpace should be reported as a new issue at BugReports.
To cite DESpace, type:
citation("DESpace")Load R packages:
suppressMessages({
library(DESpace)
library(ggplot2)
library(SpatialExperiment)
})3 Data
As an example dataset, we consider a human dorsolateral pre-frontal cortex (DLPFC) spatial transcriptomics dataset from the 10x Genomics Visium platform, including three neurotypical adult donors (i.e., biological replicates), with four images per subject (Maynard 2021). The full dataset consists of 12 samples, which can be accessed via spatialLIBD Bioconductor package.
3.1 Input data
Here, we consider a subset of the original data, consisting of three biological replicates: 1 image for each of the three brain subjects.
Initially, in Section 3 individual sample , we fit our approach on a single sample, whose data is stored in spe3 whereas all 3 samples will later be jointly used in Section 4 Multiple samples.
# Connect to ExperimentHub
ehub <- ExperimentHub::ExperimentHub()## Warning: replacing previous import 'utils::findMatches' by
## 'S4Vectors::findMatches' when loading 'AnnotationDbi'# Download the full real data (about 2.1 GB in RAM) use:
spe_all <- spatialLIBD::fetch_data(type = "spe", eh = ehub)
# Create three spe objects, one per sample:
spe1 <- spe_all[, colData(spe_all)$sample_id == '151507']
spe2 <- spe_all[, colData(spe_all)$sample_id == '151669']
spe3 <- spe_all[, colData(spe_all)$sample_id == '151673']
rm(spe_all)
# Select small set of random genes for faster runtime in this example
set.seed(123)
sel_genes <- sample(dim(spe1)[1],2000)
spe1 <- spe1[sel_genes,]
spe2 <- spe2[sel_genes,]
spe3 <- spe3[sel_genes,]
# For covenience, we use “gene names” instead of “gene ids”:
rownames(spe1) <- rowData(spe1)$gene_name
rownames(spe2) <- rowData(spe2)$gene_name
rownames(spe3) <- rowData(spe3)$gene_name
# Specify column names of spatial coordinates in colData(spe)
coordinates <- c("array_row", "array_col")
# Specify column names of spatial clusters in colData(spe)
spatial_cluster <- 'layer_guess_reordered'The spatial tissues of each sample were manually annotated in the original manuscript (Maynard 2021), and spots were labeled into one of the following categories: white matter (WM) and layers 1 to 6.
The manual annotations are stored in column layer_guess_reordered of the colData, while columns array_col and array_row provide the spatial coordinates of spots.
# We select a subset of columns
keep_col <- c(coordinates,spatial_cluster,"expr_chrM_ratio","cell_count")
head(colData(spe3)[keep_col])## DataFrame with 6 rows and 5 columns
## array_row array_col layer_guess_reordered expr_chrM_ratio
## <integer> <integer> <factor> <numeric>
## AAACAAGTATCTCCCA-1 50 102 Layer3 0.166351
## AAACAATCTACTAGCA-1 3 43 Layer1 0.122376
## AAACACCAATAACTGC-1 59 19 WM 0.114089
## AAACAGAGCGACTCCT-1 14 94 Layer3 0.242223
## AAACAGCTTTCAGAAG-1 43 9 Layer5 0.152174
## AAACAGGGTCTATATT-1 47 13 Layer6 0.155095
## cell_count
## <integer>
## AAACAAGTATCTCCCA-1 6
## AAACAATCTACTAGCA-1 16
## AAACACCAATAACTGC-1 5
## AAACAGAGCGACTCCT-1 2
## AAACAGCTTTCAGAAG-1 4
## AAACAGGGTCTATATT-1 63.2 Quality control/filtering
Quality control (QC) procedures at the spot and gene level aim to remove both low-quality spots, and lowly abundant genes. For QC, we adhere to the instructions from “Orchestrating Spatially Resolved Transcriptomics Analysis with Bioconductor” (OSTA). The library size, UMI counts, ratio of mitochondrial chromosome (chM) expression, and number of cells per spot are used to identify low-quality spots.
# Sample 1:
# Calculate per-spot QC metrics and store in colData
spe1 <- scuttle::addPerCellQC(spe1,)
# Remove combined set of low-quality spots
spe1 <- spe1[, !(colData(spe1)$sum < 10 | # library size
colData(spe1)$detected < 10 | # number of expressed genes
colData(spe1)$expr_chrM_ratio > 0.30| # mitochondrial expression ratio
colData(spe1)$cell_count > 10)] # number of cells per spot
# Sample 2:
# Calculate per-spot QC metrics and store in colData
spe2 <- scuttle::addPerCellQC(spe2,)
# Remove combined set of low-quality spots
spe2 <- spe2[, !(colData(spe2)$sum < 20 |
colData(spe2)$detected < 15 |
colData(spe2)$expr_chrM_ratio > 0.35|
colData(spe2)$cell_count > 8)]
# Sample 3:
spe3 <- scuttle::addPerCellQC(spe3,)
# Remove combined set of low-quality spots
spe3 <- spe3[, !(colData(spe3)$sum < 25 |
colData(spe3)$detected < 25 |
colData(spe3)$expr_chrM_ratio > 0.3|
colData(spe3)$cell_count > 15)]Then, we discard lowly abundant genes, which were detected in less than 20 spots.
# For each sample i:
for(i in seq_len(3)){
spe_i <- eval(parse(text = paste0("spe", i)))
# Select QC threshold for lowly expressed genes: at least 20 non-zero spots:
qc_low_gene <- rowSums(assays(spe_i)$counts > 0) >= 20
# Remove lowly abundant genes
spe_i <- spe_i[qc_low_gene,]
assign(paste0("spe", i), spe_i)
message("Dimension of spe", i, ": ", dim(spe_i)[1], ", ", dim(spe_i)[2])
}## Dimension of spe1: 847, 4174## Dimension of spe2: 868, 3635## Dimension of spe3: 908, 36014 Individual sample
We fit our approach to discover SVGs in an individual sample. In Section 4 Multiple samples, we will show how to jointly embed multiple replicates.
4.1 Clustering
This framework relies on spatial clusters being accessible and successfully summarizing the primary spatial characteristics of the data. In most datasets, these spatial features are either accessible or can be easily generated with spatial clustering algorithms.
4.1.1 Manual annotation
If manual annotations are provided (e.g., annotated by a pathologist), we can directly use those.
With the spe or spe object that contains coordinates of the spot-level data, we can visualize spatial clusters.
# View LIBD layers for one sample
CD <- as.data.frame(colData(spe3))
ggplot(CD,
aes(x=array_col,y=array_row,
color=factor(layer_guess_reordered))) +
geom_point() +
theme_void() + scale_y_reverse() +
theme(legend.position="bottom") +
labs(color = "", title = paste0("Manually annotated spatial clusters"))
4.1.2 Spatially resolved clustering
If manual annotations are not available, we can use spatially resolved clustering tools. These methods, by jointly employing spatial coordinates and gene expression data, enable obtaining spatial clusters. Although, in this vignette we use pre-computed manually annotated clusters, below we provide links to two popular spatially resolved clustering tools: BayesSpace (Zhao et al. 2021) and StLearn (Pham et al. 2020).
4.1.2.1 BayesSpace
BayesSpace is a Bioconductor package that provides a Bayesian statistical approach for spatial transcriptomics data clustering (BayesSpace). There is a specific vignette for using BayesSpace on this dataset (human DLPFC) here.
After using BayesSpace, the spatial cluster assignments (spatial.cluster) are available in the colData(spe).
4.1.2.2 StLearn
StLearn, a python-based package, is designed for spatial transciptomics data. It allows spatially-resolved clustering based on Louvain or k-means (stLearn). There is a tutorial for using StLearn on this dataset (human DLPFC) here.
After running stLearn, we can store results as a csv file.
# Save spatial results
obsm.to_csv("stLearn_clusters.csv") Then, we can load these results in R and store spatial clusters in the spe object.
stLearn_results <- read.csv("stLearn_clusters.csv", sep = ',',
header = TRUE)
# Match colData(spe) and stLearn results
stLearn_results <- stLearn_results[match(rownames(colData(spe3)),
rownames(stLearn_results)), ]
colData(spe3)$stLearn_clusters <- stLearn_results$stLearn_pca_kmeans4.2 SV testing
Once we have spatial clusters, we can search for SVGs.
4.2.1 Gene-level test
Fit the model via DESpace_test function.
Parameter spe specifies the input SpatialExperiment or SingleCellExperiment object, while spatial_cluster defines the column names of colData(spe) containing spatial clusters. To obtain all statistics, set verbose to TRUE (default value).
set.seed(123)
results <- DESpace_test(spe = spe3,
spatial_cluster = spatial_cluster,
verbose = TRUE)## using 'DESpace_test' for spatial gene/pattern detection.## Filter low quality genes:## min_counts = 20; min_non_zero_spots = 10.## The number of genes that pass filtering is 908.## single sample testA list of results is returned.
The main results of interest are stored in the gene_results: a data.fame, where columns contain gene names (gene_id), likelihood ratio test statistics (LR), average (across spots) log-2 counts per million (logCPM), raw p-values (PValue) and Benjamini-Hochberg adjusted p-values (FDR).
head(results$gene_results, 3)## gene_id LR logCPM PValue FDR
## SNCG SNCG 1314.340 14.36222 8.520089e-281 7.736241e-278
## ATP1A3 ATP1A3 1231.662 14.68926 6.719198e-263 3.050516e-260
## HPCAL1 HPCAL1 1058.545 14.11872 1.940513e-225 5.873285e-223The second element of the results (a DGEList object estimated_y) contains the estimated common dispersion, which can later be used to speed-up calculation when testing individual clusters.
The third and forth element of the results (DGEGLM and DGELRT objects) contain full statistics from edgeR::glmFit and edgeR::glmLRT.
class(results$estimated_y); class(results$glmLrt); class(results$glmFit)## [1] "DGEList"
## attr(,"package")
## [1] "edgeR"## [1] "DGELRT"
## attr(,"package")
## [1] "edgeR"## [1] "DGEGLM"
## attr(,"package")
## [1] "edgeR"Visualize the gene expression of the three most significant genes in FeaturePlot().
Note that the gene names in vector feature, should also appear in the count matrix’s row names. Specifying the column names of spatial coordinates of spots is only necessary when they are not named row and col.
(feature <- results$gene_results$gene_id[seq_len(3)])## [1] "SNCG" "ATP1A3" "HPCAL1"FeaturePlot(spe3, feature,
coordinates = coordinates,
ncol = 3, title = TRUE)
Additionally, function FeaturePlot() can draw an outline around each cluster.
FeaturePlot(spe3, feature,
coordinates = coordinates,
Annotated_cluster = TRUE,
spatial_cluster = spatial_cluster,
cluster = 'all',
legend_cluster = TRUE, title = TRUE)## Warning: Removed 17 rows containing missing values (`geom_point()`).
4.2.2 Individual cluster test
DESpace can also be used to reveal the specific areas of the tissue affected by spatial variability; i.e., spatial clusters that are particularly over/under abundant compared to the average.
Function individual_test() can be used to identify SVGs for each individual cluster.
Parameter spatial_cluster indicates the column names of colData(spe) containing spatial clusters.
For every spatial cluster we test, edgeR would normally re-compute the dispersion estimates based on the specific design of the test.
However, this calculation represents the majority of the overall computing time.
Therefore, to speed-up calculations, we propose to use the dispersion estimates which were previously computed for the gene-level tests.
Albeit this is an approximation, in our benchmarks, it leads to comparable performance in terms of sensitivity and specificity.
If you want to use pre-computed gene-level dispersion estimates, set edgeR_y to estimated_y.
Alternatively, if you want to re-compute dispersion estimates (significantly slower, but marginally more accurate option), leave edgeR_y empty.
set.seed(123)
cluster_results <- individual_test(spe3,
edgeR_y = results$estimated_y,
spatial_cluster = spatial_cluster)## Filter low quality genes:## min_counts = 20; min_non_zero_spots = 10.## The number of genes that pass filtering is908.## Pre-processing## Start modeling## Returning resultsindividual_test() returns a list containing the results of the individual cluster tests.
Similarly to above, for each cluster, results are reported as a data.fame, where columns contain gene names (gene_id), likelihood ratio test statistics (LR), log2-fold changes (logFC), raw p-values (PValue) and Benjamini-Hochberg adjusted p-values (FDR).
NB: that the logFC compares each cluster to the rest of the tissue; e.g., a logFC of 2 for WM test indicates that the average gene expression in WM is (4 times) higher than the average gene expression in non-WM tissue.
Visualize results for WM.
class(cluster_results)## [1] "list"names(cluster_results)## [1] "Layer1" "Layer2" "Layer3" "Layer4" "Layer5" "Layer6" "WM"top_results function can be used to combine gene-and cluster-level results.
By default, results from top_results() report both adjusted p-values and log2-FC; however, users can also choose to only report either, by specifying select = "FDR" or select = "logFC".
Below, gene_PValue and gene_FDR columns refer to the gene-level testing, while the subsequent columns indicate the cluster-specific results.
merge_res <- top_results(results$gene_results, cluster_results)
head(merge_res,3)## gene_id gene_LR gene_logCPM gene_Pvalue gene_FDR Layer1_FDR
## 1 SNCG 1314.340 14.36222 8.520089e-281 7.736241e-278 3.790021e-13
## 2 ATP1A3 1231.662 14.68926 6.719198e-263 3.050516e-260 4.403101e-15
## 3 HPCAL1 1058.545 14.11872 1.940513e-225 5.873285e-223 2.949341e-06
## Layer2_FDR Layer3_FDR Layer4_FDR Layer5_FDR Layer6_FDR
## 1 2.311535e-06 1.193216e-80 5.414594e-13 1.544804e-26 4.850703e-66
## 2 2.075289e-03 8.850306e-60 7.878334e-12 1.608788e-15 9.815750e-25
## 3 1.012152e-111 2.049969e-43 1.542520e-16 2.220427e-47 9.961141e-07
## WM_FDR Layer1_logFC Layer2_logFC Layer3_logFC Layer4_logFC
## 1 2.986529e-134 0.7721535 0.4610995 -0.8318863 -0.6132858
## 2 8.195215e-182 0.6339969 -0.2226503 -0.5509739 -0.4554151
## 3 4.288712e-39 0.5841284 -1.6496144 -0.7203800 1.0772047
## Layer5_logFC Layer6_logFC WM_logFC
## 1 -0.5490869 1.0930510 -1.967585
## 2 -0.3254342 0.4760440 -1.728552
## 3 1.0472272 0.3684743 -1.081710merge_res <- top_results(results$gene_results, cluster_results,
select = "FDR")
head(merge_res,3)## gene_id gene_LR gene_logCPM gene_Pvalue gene_FDR Layer1_FDR
## 1 SNCG 1314.340 14.36222 8.520089e-281 7.736241e-278 3.790021e-13
## 2 ATP1A3 1231.662 14.68926 6.719198e-263 3.050516e-260 4.403101e-15
## 3 HPCAL1 1058.545 14.11872 1.940513e-225 5.873285e-223 2.949341e-06
## Layer2_FDR Layer3_FDR Layer4_FDR Layer5_FDR Layer6_FDR
## 1 2.311535e-06 1.193216e-80 5.414594e-13 1.544804e-26 4.850703e-66
## 2 2.075289e-03 8.850306e-60 7.878334e-12 1.608788e-15 9.815750e-25
## 3 1.012152e-111 2.049969e-43 1.542520e-16 2.220427e-47 9.961141e-07
## WM_FDR
## 1 2.986529e-134
## 2 8.195215e-182
## 3 4.288712e-39We can further specify a cluster and check top genes detected by DESpace.
# Check top genes for WM
results_WM <- top_results(cluster_results = cluster_results,
cluster = "WM")
head(results_WM, 3)## Cluster gene_id Cluster_LR Cluster_logCPM Cluster_logFC Cluster_PValue
## PLEKHH1 WM PLEKHH1 967.3331 13.69914 2.320575 2.264648e-212
## ATP1A3 WM ATP1A3 838.9839 14.68926 -1.728552 1.805113e-184
## SLAIN1 WM SLAIN1 723.2867 13.78573 1.870829 2.582111e-159
## Cluster_FDR
## PLEKHH1 2.056300e-209
## ATP1A3 8.195215e-182
## SLAIN1 7.815190e-157With high_low parameter, we can further filter genes to visualize those with higher (high_low = "high") or lower (high_low = "low") average abundance in the specified cluster, compared to the average abundance in the rest of the tissue.
By default, high_low = “both” and all results are provided.
results_WM_both <- top_results(cluster_results = cluster_results,
cluster = "WM",
high_low = "both")Here we present the highly abundant cluster SVGs; i.e., SVGs with higher expression in WM compared to the rest of the area.
head(results_WM_both$high_genes, 3)## Cluster gene_id Cluster_LR Cluster_logCPM Cluster_logFC Cluster_PValue
## PLEKHH1 WM PLEKHH1 967.3331 13.69914 2.320575 2.264648e-212
## SLAIN1 WM SLAIN1 723.2867 13.78573 1.870829 2.582111e-159
## CMTM5 WM CMTM5 663.7858 13.65298 2.099117 2.244031e-146
## Cluster_FDR
## PLEKHH1 2.05630e-209
## SLAIN1 7.81519e-157
## CMTM5 4.07516e-144We visualize the lowly abundant cluster SVGs; i.e., SVGs with lower expression in WM compared to the rest of the area.
head(results_WM_both$low_genes, 3)## Cluster gene_id Cluster_LR Cluster_logCPM Cluster_logFC Cluster_PValue
## ATP1A3 WM ATP1A3 838.9839 14.68926 -1.728552 1.805113e-184
## PRKAR1B WM PRKAR1B 669.5001 14.72792 -1.505921 1.283252e-147
## NSF WM NSF 632.3670 14.50624 -1.745454 1.527644e-139
## Cluster_FDR
## ATP1A3 8.195215e-182
## PRKAR1B 2.912982e-145
## NSF 2.311835e-137Visualize the gene expression of the top genes for layer WM.
A cluster outline can be drawn by specifying the column names of clusters stored in colData(spe) and the vector of cluster names via spatial_cluster and cluster.
# SVGs with higher than average abundance in WM
feature <- rownames(results_WM_both$high_genes)[seq_len(3)]
FeaturePlot(spe3, feature, spatial_cluster = spatial_cluster,
coordinates = coordinates, cluster = 'WM',
legend_cluster = TRUE, Annotated_cluster = TRUE,
linewidth = 0.6, title = TRUE)
# SVGs with lower than average abundance in WM
feature <- rownames(results_WM_both$low_genes)[seq_len(3)]
FeaturePlot(spe3, feature, spatial_cluster = spatial_cluster,
coordinates = coordinates, cluster = 'WM',
legend_cluster = TRUE, Annotated_cluster = TRUE,
linewidth = 0.6,title = TRUE)
5 Multiple samples
If biological replicates are available, our framework allows jointly modeling them to target SVGs with coherent spatial patterns across samples. This approach may be particularly beneficial when data are characterized by a large degree of (biological and technical) variability, such as in cancer. Importantly, only genes detected (above filtering thresholds) in all samples will be analyzed.
5.1 Clustering
Similar to gene-level testing, the multi-sample extension requires pre-annotated spatial clusters.
5.1.1 Manual annotation
If the manual annotation for each sample is available, we can combine all samples and use manual annotations directly.
Note that cluster labels must be consistent across samples (i.e., WM in sample 1 should represent the same tissue as WM in sample 2).
With the spe.combined object that contains coordinates of the spot-level data, we can visualize spatial clusters.
set.seed(123)
# Use common genes
a <- rownames(counts(spe1));
b <- rownames(counts(spe2));
c <- rownames(counts(spe3))
# find vector of common genes across all samples:
CommonGene <- Reduce(intersect, list(a,b,c))
spe1 <- spe1[CommonGene,]
spe2 <- spe2[CommonGene,]
spe3 <- spe3[CommonGene,]
# Combine three samples
spe.combined <- cbind(spe1, spe2, spe3, deparse.level = 1)
ggplot(as.data.frame(colData(spe.combined)),
aes(x=array_col, y=array_row,
color=factor(layer_guess_reordered))) +
geom_point() +
facet_wrap(~sample_id) +
theme_void() + scale_y_reverse() +
theme(legend.position="bottom") +
labs(color = "", title = "Manually annotated spatial clusters")
5.1.2 Spatially resolved (multi-sample) clustering
Similarly to above, if manual annotations are not available, we can use spatially resolved clustering tools. Both BayesSpace (Zhao et al. 2021) and StLearn (Pham et al. 2020) allow jointly clustering multiple samples. In particular each tool has a specific vignettes for multi-testing clustering: BayesSpace vignettes, and stLearn vignettes.
5.1.2.1 Single sample clustering
In our benchmarks, we have noticed that, with both BayesSpace and StLearn, joint spatial clustering of multiple samples is more prone to failure and inaccurate results than spatial clustering of individual samples. Therefore, if multi-sample clustering fails, we suggest trying to cluster individual samples (as in Section 3 Individual sample) and manually match cluster ids across samples, to ensure that “cluster 1” always refers to the same spatial region in all samples.
5.2 SV testing
Once we have spatial clusters for multiple samples, we add them to colData(spe.combined) as the column layer_guess_reordered and fit the model with spatial clusters as covariates.
5.2.1 Gene-level test
Fit the model via DESpace_test().
Parameter spe specifies the input SpatialExperiment or SingleCellExperiment object, while spatial_cluster and sample_col define the column names of colData(spe) containing spatial clusters and sample ids.
With replicates = TRUE, we fit the multi-sample model.
The second element of the result (a DGEList object estimated_y_multi) contains the estimated common dispersion for the multi-sample case.
set.seed(123)
multi_results <- DESpace_test(spe = spe.combined,
spatial_cluster = spatial_cluster,
sample_col = 'sample_id',
replicates = TRUE)## using 'DESpace_test' for spatial gene/pattern detection.## Filter low quality genes:## min_counts = 20; min_non_zero_spots = 10.## The number of genes that pass filtering is 828.## multi-sample test## Repeated column names found in count matrixA list of results are returned.
The main results of interest are stored in the gene_results.
head(multi_results$gene_results,3)## gene_id LR logCPM PValue FDR
## HPCAL1 HPCAL1 2077.523 14.41880 0 0
## NSF NSF 1530.926 14.70442 0 0
## ATP1A3 ATP1A3 1577.378 14.88552 0 0The second element of the results (a DGEList object estimated_y) contains the estimated common dispersion, which can later be used to speed-up calculation when testing individual clusters.
class(multi_results$estimated_y)## [1] "DGEList"
## attr(,"package")
## [1] "edgeR"For each sample, we can visualize the gene expression of the most significant SVGs.
Note that column names of spatial coordinates of spots should be row and col.
## Top three spatially variable genes
feature <- multi_results$gene_results$gene_id[seq_len(3)]; feature## [1] "HPCAL1" "NSF" "ATP1A3"## Sample names
samples <- unique(colData(spe.combined)$sample_id); samples## [1] "151507" "151669" "151673"## Use purrr::map to combine multiple figures
spot_plots <- purrr::map(seq_along(samples), function(j) {
## Subset spe for each sample j
spe_j <- spe.combined[, colData(spe.combined)$sample_id == samples[j] ]
## Store three gene expression plots with gene names in `feature` for spe_j
spot_plots <- FeaturePlot(spe_j, feature,
coordinates = coordinates,
spatial_cluster = spatial_cluster, title = TRUE,
Annotated_cluster = TRUE, legend_cluster = TRUE)
return(spot_plots)
})
patchwork::wrap_plots(spot_plots, ncol=1)
5.2.2 Individual cluster test
Similarly to what shown in Section 3 Individual sample, our framework can discover the key SV spatial clusters also when jointly fitting multiple samples.
For a multi-sample testing, set replicates = TRUE in individual_test().
set.seed(123)
cluster_results <- individual_test(spe.combined,
edgeR_y = multi_results$estimated_y,
replicates = TRUE,
spatial_cluster = spatial_cluster)## Filter low quality genes:## min_counts = 20; min_non_zero_spots = 10.## The number of genes that pass filtering is828.## Pre-processing## Start modeling## Returning resultsindividual_test() returns a list containing the results of individual clusters, specified in cluster parameter.
In this case, logFC refers to the log2-FC between the average abundance, across all samples, of a spatial cluster and the average abundance of all remaining clusters (e.g., WM vs. non-WM tissue).
Visualize results for WM.
class(cluster_results)## [1] "list"names(cluster_results)## [1] "Layer1" "Layer2" "Layer3" "Layer4" "Layer5" "Layer6" "WM"As above, top_results function can be used to combine gene-level and cluster-level results.
merge_res <- top_results(multi_results$gene_results, cluster_results,
select = "FDR")
head(merge_res,3)## gene_id gene_LR gene_logCPM gene_Pvalue gene_FDR Layer1_FDR Layer2_FDR
## 1 ATP1A3 1577.378 14.88552 0 0 2.151103e-93 2.072718e-02
## 2 HPCAL1 2077.523 14.41880 0 0 3.779941e-15 5.864548e-193
## 3 NSF 1530.926 14.70442 0 0 2.212249e-127 4.072285e-01
## Layer3_FDR Layer4_FDR Layer5_FDR Layer6_FDR WM_FDR
## 1 3.818557e-16 1.985842e-23 1.793917e-46 5.017536e-03 1.137853e-193
## 2 8.605391e-127 4.164983e-51 2.272846e-118 2.806067e-15 5.132907e-39
## 3 4.340648e-01 1.463031e-24 1.908238e-60 9.973373e-02 6.791421e-148We can further select a cluster of interest, and check the top genes detected in that cluster.
# Check top genes for WM
results_WM <- top_results(cluster_results = cluster_results,
cluster = "WM")
# For each gene, adjusted p-values for each cluster
head(results_WM,3)## Cluster gene_id Cluster_LR Cluster_logCPM Cluster_logFC Cluster_PValue
## PLEKHH1 WM PLEKHH1 934.3408 14.00538 1.725473 3.362777e-205
## ATP1A3 WM ATP1A3 893.3425 14.88552 -1.285814 2.748437e-196
## SNCG WM SNCG 776.0140 14.60578 -1.598182 8.853985e-171
## Cluster_FDR
## PLEKHH1 2.784380e-202
## ATP1A3 1.137853e-193
## SNCG 2.443700e-168With high_low = "both", we can further filter genes to visualize highly and lowly abundant SVGs.
results_WM_both <- top_results(cluster_results = cluster_results,
cluster = "WM", high_low = "both")Here we present the highly abundant cluster SVGs; i.e., SVGs with higher expression in WM compared to the rest of the tissue.
head(results_WM_both$high_genes,3)## Cluster gene_id Cluster_LR Cluster_logCPM Cluster_logFC Cluster_PValue
## PLEKHH1 WM PLEKHH1 934.3408 14.00538 1.725473 3.362777e-205
## SLAIN1 WM SLAIN1 661.9824 14.07035 1.407736 5.536250e-146
## CMTM5 WM CMTM5 619.0642 13.99113 1.480543 1.194813e-136
## Cluster_FDR
## PLEKHH1 2.784380e-202
## SLAIN1 7.640025e-144
## CMTM5 1.413293e-134We visualize the lowly abundant cluster SVGs; i.e., SVGs with lower expression in WM compared to the rest of the tissue.
head(results_WM_both$low_genes,3)## Cluster gene_id Cluster_LR Cluster_logCPM Cluster_logFC Cluster_PValue
## ATP1A3 WM ATP1A3 893.3425 14.88552 -1.285814 2.748437e-196
## SNCG WM SNCG 776.0140 14.60578 -1.598182 8.853985e-171
## PRKAR1B WM PRKAR1B 705.0974 14.89235 -1.135837 2.329415e-155
## Cluster_FDR
## ATP1A3 1.137853e-193
## SNCG 2.443700e-168
## PRKAR1B 4.821890e-153Visualize the gene expression of top three genes for layer WM.
# SVGs with higher abundance in WM, than in non-WM tissue
feature_high <- rownames(results_WM_both$high_genes)[seq_len(3)]
# SVGs with lower abundance in WM, than in non-WM tissue
feature_low <- rownames(results_WM_both$low_genes)[seq_len(3)]
plot_list_high <- list(); plot_list_low <- list()
## Sample names
samples <- unique(colData(spe.combined)$sample_id)
for(j in seq_along(samples)){
## Subset spe for each sample j
spe_j <- spe.combined[, colData(spe.combined)$sample_id == samples[j]]
## Gene expression plots with top highly abundant cluster SVGs for spe_j
plot_list_high[[j]] <- FeaturePlot(spe_j, feature_high,
coordinates = coordinates,
spatial_cluster = spatial_cluster,
linewidth = 0.6,
cluster = 'WM', Annotated_cluster = TRUE,
legend_cluster = TRUE, title = TRUE)
## Gene expression plots with top lowly abundant cluster SVGs for spe_j
plot_list_low[[j]] <- FeaturePlot(spe_j, feature_low,
coordinates = coordinates,
spatial_cluster = spatial_cluster,
linewidth = 0.6,
cluster = 'WM', Annotated_cluster = TRUE,
legend_cluster = TRUE, title = TRUE)
}
# Expression plots for SVGs with higher abundance in WM, than in non-WM tissue
patchwork::wrap_plots(plot_list_high, ncol=1)
# Expression plots for SVGs with lower abundance in WM, than in non-WM tissue
patchwork::wrap_plots(plot_list_low, ncol=1)
6 Session info
sessionInfo()## R version 4.3.0 RC (2023-04-13 r84269 ucrt)
## Platform: x86_64-w64-mingw32/x64 (64-bit)
## Running under: Windows Server 2022 x64 (build 20348)
##
## Matrix products: default
##
##
## locale:
## [1] LC_COLLATE=C
## [2] LC_CTYPE=English_United States.utf8
## [3] LC_MONETARY=English_United States.utf8
## [4] LC_NUMERIC=C
## [5] LC_TIME=English_United States.utf8
##
## time zone: America/New_York
## tzcode source: internal
##
## attached base packages:
## [1] stats4 stats graphics grDevices utils datasets methods
## [8] base
##
## other attached packages:
## [1] SpatialExperiment_1.10.0 SingleCellExperiment_1.22.0
## [3] SummarizedExperiment_1.30.0 Biobase_2.60.0
## [5] GenomicRanges_1.52.0 GenomeInfoDb_1.36.0
## [7] IRanges_2.34.0 S4Vectors_0.38.0
## [9] BiocGenerics_0.46.0 MatrixGenerics_1.12.0
## [11] matrixStats_0.63.0 ggplot2_3.4.2
## [13] DESpace_1.0.0 BiocStyle_2.28.0
##
## loaded via a namespace (and not attached):
## [1] splines_4.3.0 later_1.3.0
## [3] BiocIO_1.10.0 bitops_1.0-7
## [5] filelock_1.0.2 fields_14.1
## [7] tibble_3.2.1 R.oo_1.25.0
## [9] polyclip_1.10-4 XML_3.99-0.14
## [11] lifecycle_1.0.3 rstatix_0.7.2
## [13] edgeR_3.42.0 doParallel_1.0.17
## [15] lattice_0.21-8 MASS_7.3-59
## [17] backports_1.4.1 magrittr_2.0.3
## [19] limma_3.56.0 plotly_4.10.1
## [21] sass_0.4.5 rmarkdown_2.21
## [23] jquerylib_0.1.4 yaml_2.3.7
## [25] httpuv_1.6.9 spam_2.9-1
## [27] sessioninfo_1.2.2 reticulate_1.28
## [29] cowplot_1.1.1 DBI_1.1.3
## [31] RColorBrewer_1.1-3 golem_0.4.0
## [33] maps_3.4.1 abind_1.4-5
## [35] zlibbioc_1.46.0 purrr_1.0.1
## [37] R.utils_2.12.2 RCurl_1.98-1.12
## [39] tweenr_2.0.2 rappdirs_0.3.3
## [41] GenomeInfoDbData_1.2.10 ggrepel_0.9.3
## [43] irlba_2.3.5.1 dqrng_0.3.0
## [45] DelayedMatrixStats_1.22.0 codetools_0.2-19
## [47] DropletUtils_1.20.0 DelayedArray_0.26.0
## [49] DT_0.27 scuttle_1.10.0
## [51] ggforce_0.4.1 tidyselect_1.2.0
## [53] farver_2.1.1 ScaledMatrix_1.8.0
## [55] viridis_0.6.2 shinyWidgets_0.7.6
## [57] BiocFileCache_2.8.0 GenomicAlignments_1.36.0
## [59] jsonlite_1.8.4 BiocNeighbors_1.18.0
## [61] ellipsis_0.3.2 scater_1.28.0
## [63] iterators_1.0.14 foreach_1.5.2
## [65] tools_4.3.0 ggnewscale_0.4.8
## [67] Rcpp_1.0.10 glue_1.6.2
## [69] gridExtra_2.3 xfun_0.39
## [71] dplyr_1.1.2 HDF5Array_1.28.0
## [73] withr_2.5.0 BiocManager_1.30.20
## [75] fastmap_1.1.1 rhdf5filters_1.12.0
## [77] fansi_1.0.4 rsvd_1.0.5
## [79] digest_0.6.31 R6_2.5.1
## [81] mime_0.12 colorspace_2.1-0
## [83] RSQLite_2.3.1 R.methodsS3_1.8.2
## [85] config_0.3.1 utf8_1.2.3
## [87] tidyr_1.3.0 generics_0.1.3
## [89] data.table_1.14.8 rtracklayer_1.60.0
## [91] httr_1.4.5 htmlwidgets_1.6.2
## [93] pkgconfig_2.0.3 gtable_0.3.3
## [95] blob_1.2.4 XVector_0.40.0
## [97] htmltools_0.5.5 carData_3.0-5
## [99] dotCall64_1.0-2 bookdown_0.33
## [101] scales_1.2.1 png_0.1-8
## [103] attempt_0.3.1 knitr_1.42
## [105] rjson_0.2.21 curl_5.0.0
## [107] cachem_1.0.7 rhdf5_2.44.0
## [109] stringr_1.5.0 BiocVersion_3.17.1
## [111] concaveman_1.1.0 vipor_0.4.5
## [113] parallel_4.3.0 AnnotationDbi_1.62.0
## [115] restfulr_0.0.15 pillar_1.9.0
## [117] grid_4.3.0 vctrs_0.6.2
## [119] promises_1.2.0.1 ggpubr_0.6.0
## [121] BiocSingular_1.16.0 car_3.1-2
## [123] dbplyr_2.3.2 beachmat_2.16.0
## [125] xtable_1.8-4 beeswarm_0.4.0
## [127] paletteer_1.5.0 evaluate_0.20
## [129] magick_2.7.4 Rsamtools_2.16.0
## [131] cli_3.6.1 locfit_1.5-9.7
## [133] compiler_4.3.0 rlang_1.1.0
## [135] crayon_1.5.2 ggsignif_0.6.4
## [137] labeling_0.4.2 rematch2_2.1.2
## [139] ggbeeswarm_0.7.1 stringi_1.7.12
## [141] viridisLite_0.4.1 BiocParallel_1.34.0
## [143] assertthat_0.2.1 munsell_0.5.0
## [145] Biostrings_2.68.0 lazyeval_0.2.2
## [147] V8_4.3.0 Matrix_1.5-4
## [149] ExperimentHub_2.8.0 benchmarkme_1.0.8
## [151] patchwork_1.1.2 sparseMatrixStats_1.12.0
## [153] bit64_4.0.5 Rhdf5lib_1.22.0
## [155] statmod_1.5.0 KEGGREST_1.40.0
## [157] shiny_1.7.4 highr_0.10
## [159] interactiveDisplayBase_1.38.0 AnnotationHub_3.8.0
## [161] broom_1.0.4 memoise_2.0.1
## [163] bslib_0.4.2 benchmarkmeData_1.0.4
## [165] bit_4.0.5 spatialLIBD_1.11.14References
Maynard, Collado-Torres, K. R. 2021. “Transcriptome-scale spatial gene expression in the human dorsolateral prefrontal cortex.” Nature Neurosciencei 24: 425–36. https://doi.org/10.1038/s41593-020-00787-0.
Pham, Duy Truong, Xiao Tan, Jun Xu, Laura F Grice, Pui Yeng Lam, Arti Raghubar, Jana Vukovic, Marc J Ruitenberg, and Quan Hoang Nguyen. 2020. “stLearn: integrating spatial location, tissue morphology and gene expression to find cell types, cell-cell interactions and spatial trajectories within undissociated tissues.” Bioinformatics 36 (7): 2293–4. https://doi.org/doi:10.1093/bioinformatics/btz914.
Robinson, M. D, D. J McCarthy, and G. K. Smyth. 2009. “edgeR: a Bioconductor package for differential expression analysis of digital gene expression data.” Bioinformatics 26 (1): 139–40. https://doi.org/10.1093/bioinformatics/btp616.
Zhao, E, M. R Stone, X Ren, J Guenthoer, K. S Smythe, T Pulliam, S. R Williams, et al. 2021. “Spatial transcriptomics at subspot resolution with BayesSpace.” Nature Biotechnology 39 (June): 1375–84. https://doi.org/10.1038/s41587-021-00935-2.