---
title: "The ChIPanalyser User's Guide"
author: "Patrick Martin"
date: "22/08/2017"
output:
    pdf_document: null
    keep_tex: yes
    number_sections: no
    html_document: default
package: '`ChIPanalyser'''
vignette: |
    %\VignetteIndexEntry{ChIPanalyser User's Guide}
    %\VignetteEncoding{UTF-8}
    %\VignetteEngine{knitr::rmarkdown}
---
# Introduction
Transcriptional regulation is undeniably a key aspect of cellular homeostasis.
It comes to no surprise that modern molecular biology and genomics have
showed a keen interest in the subject. Transcription factors (TF) are a force
to be reckoned with in the world of transcriptional regulation. Transcription
factors are proteins that bind to DNA in a site-specific manner.
Experimentally, this binding site can be determined by various methods
such as SELEX-seq, EMSA or DNAse footprinting.
The final result will be a sequence to which a
given TF will bind preferentially. In many case, these results are
presented in the form of a Position Frequency Matrix or
Position Weight Matrix. However at a genome wide scale, modern molecular
biology relies on methods such as Chromatin Immuno-precipitation linked to
sequencing. This method generates a genome wide profile with peaks
at sites of high TF occupancy. These experiments may be very costly and it
would be interesting to be able to predict TF occupancy
sites *in silico*. With this idea in mind, we present **ChIPanalyser** ,
a R package developed in the effort of predicting Transcription factor binding.
At the core of this package resides an approximation of statistical
thermodynamcis as suggested by Zabet (Zabet et al. 2015).
The statistical thermodynamcis framework proposed by Zabet offers a strong
ground for binding site prediction as it requires minimal data input.
In its current version, ChIPAnalyser requires a DNA sequence, a
Position Weight Matrix, the number of bound molecules (or TFs bound to DNA)
and a scaling factor for TF specificity. To improve the accuracy of the model,
it is also possible to incorporate DNA accessibility data.


# Methods

As described above, ChIPAnalyser is based on an approximation of statistical
thermodynamics. The core formula describing TF binding is given by :
$$P(N,a,\lambda,\omega)_{j} = \frac{N \cdot a_{j} \cdot e^{(\frac{1}{\lambda}
\cdot \omega_{j})}}{N \cdot a_{j} \cdot e^{(\frac{1}{\lambda}
\cdot \omega_{j})}+ L \cdot n \cdot [a_{i} \cdot e^{(\frac{1}
\lambda \cdot \omega_j)}]_ {i}} $$
with

* N , the number of TF molecules bound to DNA
* a , DNA accessibility
* $\lambda$ , a parameter scaling the specificity of a given TF
* $\omega$ , a Position Weight Matrix.

# Work Flow - Quick start

## Example data Loading

Before going through the inner workings of the package and the work flow,
this section will quickly demonstrate how to load example datasets
stored in the package. This data represents a minimal workable examples for
the different functions. All data is derived from real biological data
in *Drosophila melanogaster* (The *Drosophila melanogaster*
genome can be found as a `BSgenome`).

```{r, eval=TRUE, warnings = FALSE, echo=TRUE}
library(ChIPanalyser)

#Load data
data(ChIPanalyserData)

# Loading DNASequenceSet from BSgenome object
if(!require("BSgenome.Dmelanogaster.UCSC.dm3", character.only = TRUE)){
    source("https://bioconductor.org/biocLite.R")
    biocLite("BSgenome.Dmelanogaster.UCSC.dm3")
    }
library(BSgenome.Dmelanogaster.UCSC.dm3)
DNASequenceSet <-getSeq(BSgenome.Dmelanogaster.UCSC.dm3)



#Loading Position Frequency Matrix

PFM <- file.path(system.file("extdata",package="ChIPanalyser"),"BCDSlx.pfm")

#Checking if correctly loaded
ls()

```
The global environment should now contain a few new variables:
DNASequenceSet,PFM,Access,geneRef, eveLocus, eveLocusChip.

* `DNASequenceSet` is DNAStringSet extracted from the
*Drosophila melanogaster* genome (BSgenome). It is advised to
use a full genome sequence for this object.
* `PFM` is a path to file. In this case, it is a Position Frequency Matrix
derived from the Bicoid Transcription factor in *Drosophila melanogaster*.
This PFM is in RAW format. Although it is possible to to directly
use a PFM R object, we chose to use a path to a file for this example.
Most PFM's downloadable online will come in a text file
(with various formats: RAW, TRANSFAC, JASPAR).
`ChIPanalyser` is capable of handling all these formats and parsing
these files to usable objects within the package.
* `Access` is a `GRanges` object containing accessible DNA for
the sequence above.
* `geneRef` is list of `GRanges` containing genetic information
(exon, intron, 3'UTR, 5'UTR) for the sequence above.
* `eveLocus` is a `GRanges` object with genomic postion for the eve strip
locus in *Drosophila melanogaster*.
* `eveLocusChip` is list containing real ChIP-seq data
(normalised to each base pair) of the eve strip locus in
*Drosophila melanogaster*.

This section  presents a quick work flow. For details on the work flow and
objects, see section **Work Flow - Full Guide**

## Quick Start

### Step 1 - Building Data objects

The first step is to set up your data storing objects. These objects
will automatically compute Position Weight Matrix from a Position
Frequency Matrix, and Base Pair Frequency from a DNAStringSet.
The values that are provided in this example are extracted
from real biological data.

NOTE:These values
will differ depending on the source of the data and the data
itself.

```{r,eval=TRUE, warnings = FALSE}
# Building a genomicProfileParameters objects for data
# storage and PWM computation
GPP <- genomicProfileParameters(PFM=PFM,PFMFormat="raw",
    BPFrequency=DNASequenceSet,
    ScalingFactorPWM = 1.5,
    PWMThreshold = 0.7)
GPP

# Building occupancyProfileParameters with default values
OPP <- occupancyProfileParameters()
OPP

# Building occupancyProfileParameters with custom values
OPP <- occupancyProfileParameters(ploidy= 2,
    boundMolecules= 1000,
    chipMean = 200,
    chipSd = 200,
    chipSmooth = 250,
    maxSignal = 1.847,
    backgroundSignal = 0.02550997)
OPP
```

### Step 2 - Optimal Parameters

The model is based on the approximation of statistical thermodynamics with
inference of two parameters (ScalingFactorPWM and boundMolecules).
In order to infer these parameters,
we suggest to use `computeOptimal`.
Values that should be tested for `ScalingFactorPWM` and for
`boundMolecules` should be provided by user as described above.
If these values are not provided (default value OR only one value
for each parameter), then they will be assigned internally.
The internal values are the following:

```{r,eval=FALSE}
ScalingFactorPWM(genomicProfileParameters) <- c(0.25, 0.5, 0.75, 1, 1.25,
    1.5, 1.75, 2, 2.5, 3, 3.5 ,4 ,4.5, 5)

boundMolecules(occupancyProfileParameters) <- c(1, 10, 20, 50, 100,
    200, 500,1000,2000, 5000,10000,20000,50000, 100000,
    200000, 500000, 1000000)
```


`computeOptimal`contains the following arguments:



```{r, eval = TRUE, warnings = FALSE}

optimalParam <- computeOptimal(DNASequenceSet = DNASequenceSet,
    genomicProfileParameters = GPP,
    LocusProfile = eveLocusChip,
    setSequence = eveLocus,
    DNAAccessibility = Access,
    occupancyProfileParameters = OPP,
    parameter = "all",
    peakMethod="moving_kernel")
optimalParam

```

**This Function might take some time to compute. Do not be alarmed
if it takes some time to run.
You should be notified of the progress of the function as it goes**

This function is a combination of all the functions bellow with some
more magic to it. In the following steps we will describe each of the functions.

### Step 3 - Genome Wide Scoring

Computing Genome Wide metrics that will be used further down the line.

```{r, eval=TRUE, warnings = FALSE}

genomeWide <- computeGenomeWidePWMScore(DNASequenceSet=DNASequenceSet,
    genomicProfileParameters=GPP, DNAAccessibility = Access)
genomeWide
```

`computeGenomeWidePWMScore` will return a `genomicProfileParameters` object
with updated values for `maxPWMScore`, `minPWMScore`,`averageExpPWMScore`,
and `DNASequenceLength`.


### Step 4 - PWM Scores Above Threshold

Once genome wide scores have been computed, the `genomeWide` object
(previously computed) should be parsed to the next function. The next
function will compute sites above the assigned threshold (see below) for
a given locus (or set of loci). If no Locus is provided then the whole
genome will be considered.


```{r,eval=TRUE, warnings = FALSE}
SitesAboveThreshold <- computePWMScore(DNASequenceSet=DNASequenceSet,
    genomicProfileParameters=genomeWide,
    setSequence=eveLocus, DNAAccessibility = Access)
SitesAboveThreshold
```

This function returns another `genomicProfileParameters` object with
an updated `AllSitesAboveThreshold` slot. This slot contains a `GRanges`
object with sites above threshold and associated PWMScores.

### Step 4 - compute Occupancy

From the PWMScores, `ChIPanalyser` will compute occupancy for each
sites above threshold.

```{r,eval=TRUE, warnings = FALSE}
Occupancy <- computeOccupancy(SitesAboveThreshold,
    occupancyProfileParameters= OPP)
Occupancy
```

This function will return a `genomicProfileParameters` object with an updated
`AllSitesAboveThreshold`. Now the Occupancy values for each sites are
included.

### Step 5 - compute ChIP -seq like profiles

The ultimate goal of `ChIPanalyser` is to produce ChIP-seq like profile
predicting transcription factor binding. To do so, the following function
will compute ChIP-seq like scores from occupancy values.

```{r, eval=TRUE, warnings = FALSE}
chipProfile <- computeChipProfile(setSequence = eveLocus,
    occupancy = Occupancy,occupancyProfileParameters = OPP,
    method="moving_kernel")
chipProfile

```

This function will return a`List` of `GRangesList`s of `GRanges`.
Each element of the list represents a combination of
`ScalingFactorPWM` and `boundMolecules`. The `GRangesList`
contains the Loci of interest. Finally, the individual `GRanges`
contains ChIP-seq like scores for every *n* base pairs
(with n = stepSize, see bellow).

This object may be difficult to navigate if many different parameters,
or Loci are used. In order to facilitate navigation, we included
a search function. **See function: searchSites**
This function can also be used to navigate `AllSitesAboveThreshold` slot
after occupancy scores have been computed.

### Step 6 - Model Accuracy

In order to plot the model accuracy (predicted model against real ChIP-seq
data).


```{r, eval=TRUE, warnings = FALSE}
AccuracyEstimate <- profileAccuracyEstimate(LocusProfile = eveLocusChip,
    predictedProfile = chipProfile, occupancyProfileParameters = OPP)
AccuracyEstimate

```

### Step 7 - Plotting

Finally, once all has been computed, it is possible to plot the results.

```{r, eval=TRUE, warnings = FALSE, fig.width=10, fig.height=9.5}
# Plotting Optimal heat maps
plotOptimalHeatMaps(optimalParam, parameter="all")

```


```{r, eval=TRUE, warnings = FALSE, fig.width=10, fig.height=6}
# Plotting occupancy Profile
plotOccupancyProfile(predictedProfile=chipProfile[[1]][[1]],
    setSequence=eveLocus,
    profileAccuracy = AccuracyEstimate[[1]][[1]],
    chipProfile = eveLocusChip[[1]],
    occupancy = AllSitesAboveThreshold(Occupancy)[[1]][[1]],
    DNAAccessibility = Access,
    occupancyProfileParameters = OPP,
    geneRef = geneRef)
```


# Work Flow - Full Guide

This section will describe `ChIPanalyser`'s work flow.
However in this section
we will describe in detail data objects, parameters, and functions.
Please refer to this section if in doubt. If the doubt persists,
don't hesitate to send an email to the maintainer.


## Data objects - Genomic Profile Parameters

The very first aspect to consider when using ChIPAnalyser is data input.
Many (if not all functions) require specific data inputs and parameters in
order to carry out the computation. To facilitate, the storage of these
parameters, we created a `genomicProfileParameters` object (S4 class).
This is the very first step before any other work. All other functions rely
on this `genomicProfileParameters` object in one form or another.
The output of most functions will be a `genomicProfileParameters` object.
Thus the output of one functions should be used as an input for the next
functions in the pipeline. All functions are described bellow in
section **Work Flow - Analysis**.

This object comes in the following form:
```{r, eval=FALSE, echo=TRUE}
genomicProfileParameters(PWM, PFM, ScalingFactorPWM, PFMFormat, pseudocount,
    BPFrequency, naturalLog, noOfSites,
    minPWMScore, maxPWMScore, PWMThreshold,
    AllSitesAboveThreshold, DNASequenceLength,
    averageExpPWMScore, strandRule,whichstrand, NoAccess)
```

To build a `genomicProfileParameters` object :

```{r, eval=FALSE, echo=TRUE}
# Assign Value wanted for each parameter
GPP <- genomicProfileParameters(PWM, PFM,ScalingFactorPWM, PFMFormat,
    pseudocount, BPFrequency, naturalLog, noOfSites,
    PWMThreshold, DNASequenceLength,
    strandRule, whichstrand)
```

As one can see, `genomicProfileParameters` contains many arguments.
However many of these arguments already have default values assigned to them.
Some of the arguments should not be set by user.
These values are computed internally and will automatically updated
(minPWMScore, maxPWMScore, AllSitesAboveThreshold, NoAccess).
In this situation, most arguments are not required to
build a `genomicProfileParameters` object and a minimal build can
be described as:

```{r, eval=TRUE, warnings = FALSE, echo=TRUE}
# return empty genomicProfileParameters object
GPP <- genomicProfileParameters()
# return minimal working object
GPP <- genomicProfileParameters(PFM=PFM,PFMFormat="raw")
# Suggested Minimal Build
GPP <- genomicProfileParameters(PFM=PFM,PFMFormat="raw",
BPFrequency=DNASequenceSet)
```

Although many parameters have assigned default values, it is recommended
to use custom parameters to better fit the needs of the analysis.
The method described above will build a new `genomicProfileParameters` object
with the values that were assigned to each argument. Only three slots are
required in order to build a `genomicProfileParameters` object
(see below - **The compulsory ones**).Most other slots are optional.
If after building `genomicProfileParameters`, you wish to modify the value
of only *one* slot and keep the values that you had previously assigned,
it is possible to modify each slot individually by using the
slot *access/setter* methods.  Each slot and it's *access/setter* method
is described below.

### Position Matricies - The compulsory ones

* `PWM` , a Position Weight Matrix. If a Position Weight Matrix is readily
available it is possible to directly use this Matrix. This `PWM` should
contain four rows ( one for each base pair; ACTG in order). The number c
olumns will depend on the length of the preferred binding motif of a given
Transcription Factor. This argument is only necessary IF and ONLY IF,
no `PFM` (Position Frequency Matrix) is available. Choosing between `PWM`
or `PFM` comes down to personal choice as long a `PWM` is available for
further computation (see `PFM`). If a `PFM` is available (see below),
the Position Weight Matrix will be directly computed from the
Position Frequency Matrix. Although it is possible to assign a new
PWM to the `genomicProfileParameters` object without creating a new object,
we suggest that if you were to decided to use another
Position Weight Matrix to create a new `genomicProfileParameters`.

```{r, eval=TRUE, warnings = FALSE, echo=TRUE}
#Accessing PositionWeightMatrix slot
PositionWeightMatrix(GPP)
```
```{r,eval=FALSE, warnings= FALSE, echo=TRUE}
# Setting PositionWeightMatrix slot
PositionWeightMatrix(GPP) <- newPWM
### This is not the advised method
### newPWM is a matrix following the format described above
```

* `PFM` , a Position Frequency Matrix. The Position Frequency Matrix argument
may come in multiple forms: in the form of a Matrix containing four rows
(one for each base pair ACTG) and columns depending of the length of the
binding motif or in the form of a path to file linking to a `PFM`.
Position Frequency Matricies come in various configurations.
The most common ones (all supported by ChIPAnalyser) are RAW
(similar to the simple matrix described previously),
Transfac and JASPAR. Finally, if the binding sequences are available,
the `PFM` will be generated from sequence information.
We suggest to use a path/to/file linking towards the `PFM` file.
Most `PFM` will come in one of the formats described above and
`ChIPanalyser` will parse these files in a usable format.
However, PLEASE NOTE THAT THE FORMAT SHOULD BE SPECIFIED.
See `PFMFormat` bellow.

If a `PWM` is readily available, `PFM` is not necessary.
However, keep in mind that at least one is necessary.
Although it is possible to assign a new PFM to the `genomicProfileParameters`
object without creating a new object, we suggest that if you were
to decided to use another Position Frequency Matrix
to create a new `genomicProfileParameters`.

```{r, eval=TRUE, warnings = FALSE, echo=TRUE}
# Accessing PositionFrequencyMatrix slot
PositionFrequencyMatrix(GPP)
```
```{r,eval=FALSE, warnings=FALSE, echo=TRUE}
# Setting PositionFrequencyMatrix slot
PositionFrequencyMatrix(GPP) <- newPFM

```
In this situation, `newPFM` is either a path to file or a PFM matrix.
The PFMFormat will be the one assigned to the `genomicProfileParameters`
object.

At least one of **PWM** or **PFM** is required to create a
`genomicProfileParameters` storage object. If a `PFM` is provided
then the `PWM` will be automatically computed and updated.


* `PFMFormat`, a file format for `PositionFrequencyMatrix` file.
When Loading a PFM from a file (as described above), one should
included the format of the file that they are using.
`PFMFormat` may be one of the following:
"raw","transfac","JASPAR" or "sequences".

```{r,eval=FALSE, echo=TRUE}
PFMFormat(GPP)

PFMFormat(GPP)<-"raw"
```
Default is set at "raw".


All other arguments are optional however we strongly recommend to
tailor the values assigned to `genomicProfileParameters` to your needs.
The following sections will describe these optional parameters.

### Genomic Parameters - The optional ones


* `ScalingFactorPWM` , a scaling factor for TF specificity.
Although this parameter is optional (Default value is set at 1),
the *scaling factor* (or *lambda* as described in the equations above)
is crucial for many functions (described below). ScalingFactorPWM, must
be a positive numeric value or a vector containing positive numeric values.
The optimal value for `ScalingFactorPWM` may be inferred by using
`computeOptimal`. Different values for `ScalingFactorPWM` will influence
the goodness of fit of the model. For more information,
see `computeOptimal` and `profileAccuracyEstimate`.

```{r, eval=F, echo=TRUE}
ScalingFactorPWM(GPP)

ScalingFactorPWM(GPP) <- 0.5

ScalingFactorPWM(GPP) <- c(0.5, 1, 1.5, 2)
```

* `PWMpseudocount`, a probability modifier. When computing
a `PWM` from a `PFM`, it is possible that certain base pairs are
completely absent from the Position Frequency Matrix. This absence will
lead to odd results as part of this transformation requires a logarithmic
transformation (at Position probability matrix step - a Matrix that describes
the simple probability of a base pair being in that position of a binding
motif given the PFM). *zeroes* will give minus infinities. In order to
overcome this problem,a `PWMpseudocount` is introduced in the
Position Probability Matrix.
a `PWMpseudocount` of 1 (Default Value is 1) will then become a 0 after
logarithmic transformation thus removing any mathematical discomforts.

```{r, eval=F, echo=TRUE}
PWMpseudocount(GPP)

PWMpseudocount(GPP) <- 1
```

* `BPFrequency`, the frequency at which each base pair will occur in a given
organism. Probabilistically speaking, all base pairs have an equal chance of
occurring in the genome
(Default value for this slot is set at 0.25 per base pair).
However, biologically speaking this is not the case. `BPFrequency` may
be supplied in various forms. If base pair frequency is known, it may be
supplied as a vector containing the probability of occurrence of each base
pair. If however, this frequency is unknown, `genomicProfileParameters`
will compute `BPFrequency` from a `BSgenome` or a `DNAStringSet`.
Bare in mind that `BPFrequency` is used to generate a *PWM* from a *PFM*,
thus if one were to change the BPFrequency after creating
a `genomicProfileParameters` with an already computed *PWM* ,
this would not influence the value of the *PWM*.
It would be necessary to rebuild a new `genomicProfileParameters` object.

```{r, eval=F, echo=TRUE}
BPFrequency(GPP)

BPFrequency(GPP)<-c(0.2900342,0.2101426,0.2099192,0.2899039)

BPFrequency(GPP) <- DNASequenceSet

```

* `naturalLog`, a logical value. As described previously (see `pseudocount`),
the transformation from PFM to PWM requires a logarithmic transformation.
The user may choose which logarithmic transformation, they would rather
apply (Default is `TRUE`). If `naturalLog = TRUE`, then the natural
logarithm will be used for transformation. If `naturalLog = FALSE`,
then *log2* will be used instead. Keep in mind that,
the goal is to avoid any funky business during PFM to PWM transformation
(e.g. Minus infinities or division by zero).

```{r, eval=F, echo=TRUE}
naturalLog(GPP)

naturalLog(GPP) <- FALSE

```
* `noOfSites` , the number of sites used to compute the `PWM` from
the `PFM`. In the event that a `PFM` contains a large amount of sites
(as it sometimes is the case with Transfac PFM), it is possible to
restrict this number of sites. The default value is 0. When `noOfSites = 0`,
the whole `PFM` is used to compute the `PWM`.

```{r, eval=F, echo=TRUE}
noOfSites(GPP)

noOfSites(GPP) <- 8

```

* `PWMThreshold`, a numeric threshold against which PWMScores are selected
(Default is 0.7). Although it is possible to compute every single motif
present in a stretch of DNA (if this is of interest, set `PWMThreshold` to 0),
in most cases, only the sites with a high PWM Score will be of interest.
The `PWMThreshold` , a numeric value between 0 and 1, will select regions
above that given threshold. For the default threshold of 0.7, only the
top 30% of PWMScores will be selected.

```{r, eval=F, echo=TRUE}
PWMThreshold(GPP)

PWMThreshold(GPP) <- 0.7

```

* `strandRule`, indicates how the genome should be scored with
the `PWM` (Default is "max"). As DNA is double stranded, it is necessary to
specify how a strand of DNA should be scored.
If `strandRule = "max"`, both strands will be scored and the highest score
between each strand will be selected. If  `strandRule = "sum"`, both strands
will be scored and their respective score will be summed.
If `strandRule =  "mean"`, both strands will be score and the average score
between both strands will selected as PWM Score.
Only three possibilities: "max", "sum" and "mean"

```{r, eval=F, echo=TRUE}
strandRule(GPP)

strandRule(GPP) <- "mean"

```

* `whichstrand`, indicates which strand will be used to score the genome
with the `PWM` (Default is both strand and is indicated by "+-").
Three options exist: plus strand ("+"), minus strand ("-")
or both ("+-" or "-+").

```{r, eval=F, echo=TRUE}
whichstrand(GPP)

whichstrand(GPP) <- "+"

```

### Genomic Parameters - The Updated ones

Some of the slots `genomicProfileParameters` should not be changed by user.
We strongly advise
against changing these slots. Certain Parameters are updated after a certain
computation has been carried out. For example, `maxPWMScore` and
`minPWMScore` are computed during the `computeGenomeWidePWMScore`
function (see below) and represent both the highest and the lowest
score of the given DNA sequence. These slots will be updated in the
`genomicProfileParameters` object as one makes its way through the
ChIPAnalyser work flow. Essentially, they are place holders for information
required further down the work flow. Only slots that are of interest for the
user are available for visualisation. If these slots have note been updated,
the function will not return any value.



* `maxPWMScore`, a numeric value describing the highest PWM Score on a
given DNA sequence and the value assigned to `lambda`.
It is still possible to access this slot using:

```{r, eval=TRUE, warnings = FALSE, echo=TRUE}
maxPWMScore(Occupancy)
```

* `minPWMScore`, a numeric value describing the lowest PWM Score on a
given DNA sequence and the value assigned to `lambda`.
It is possible to access this slot using:

```{r, eval=TRUE, warnings = FALSE, echo=TRUE}
minPWMScore(Occupancy)
```

* `averageExpPWMScore`  a numeric value representing the exponential
of the average PWM Score. This score depends on the values assigned
to `lambda`.
It is possible to access this slot using:

```{r, eval=TRUE, warnings = FALSE, echo=TRUE}
averageExpPWMScore(Occupancy)
```

* `DNASequenceLength` , a numeric value describing the length of the
DNA sequence used. Although theoretically one could provide this information,
DNA length is automatically computed and the slot updated during
`computeGenomeWidePWMScore` function. The length of this sequence is
the length of the sequence used to compute the scores previously
mentioned (maxPWMScore, minPWMScore and averageExpPWMScore).
This means that if DNA accessibility data is provided,
the length of the sequence will only be the length of the accessible DNA.


```{r, eval=TRUE, warnings = FALSE, echo=TRUE}
DNASequenceLength(Occupancy)
```

* `NoAccess`, indicates if certain Loci of interest (see setSequence below)
**do not** contain any accessible DNA. It is possible that certain of the
loci you have chosen do not contain any accessible DNA (no overlap with
DNA accessibility data provided). If this is the case, you will be
notified during the computation and the loci will be s
tored in the `NoAccess` slot.

```{r, eval=TRUE, warnings = FALSE, echo=TRUE}
NoAccess(Occupancy)
```

* `AllSitesAboveThreshold`, stores all sites above threshold with the
associated PWM Score and Occupancy. This slot may contain a variety of objects
however they all represent the same thing: it will always contain at its
core a GRanges object (slot class defined as "GRlist" -  can be one of the
following `GRangesList` or `list`). This GRanges inlcudes sites above
threshold (start, end and strand), PWMScores for those sites and possibly
Occupancy (depending on what has already been computed). GRanges are
encapsulated in a GRangesList as each GRanges represent a specific Loci.
This GRangesList may also be encapsulated in a list. This list will
represent a combination of `lambda` and number of bound Molecules
(see `boundMolecules`). For more information on this list see
`computeOccupancy`. It is possible to access this  slot by using:

```{r, eval=TRUE, warnings = FALSE, echo=TRUE}
AllSitesAboveThreshold(Occupancy)

# Or

searchSites(Occupancy)

```
The size of the `AllSitesAboveThreshold` slot will increase drastically
as the number of values assinged to `ScalingFactorPWM` (or `lambda`) and
`boundMolecules` increases. In order to navigate and search this slot with
ease, it is possible to use the `searchSites` function
(**See below: searchSites**).


## Data Objects - Occupancy Profile Parameters

`genomicProfileParameters` represents a good chunk of the parameters
needed to go through the entire ChIPAnalyser work flow. However, there are
more to come! A second parameter storing object was created to handle
non-compulsory parameters. This lightens `genomicProfileParameters` by
handling part of the parameters. This second S4 object is called
`occupancyProfileParameters`. The interesting aspect of this object is
that none of the slots are compulsory. This means that if not provided ,
a new `occupancyProfileParameters` object will be created internally.
All default values will be used for further computation.
As stated previously, we strongly advise using custom parameters in order
to increase goodness of fit of model .
It is especially the case here, as slots such as
`maxSignal` are directly extracted from biological data
(ChIP-seq data - see `computeChipProfile` and
`profileAccuracyEstimate` for more information).


```{r, eval=FALSE}
OPP <- occupancyProfileParameters(ploidy = 2 ,boundMolecules = 1000 ,
    backgroundSignal = 0 ,maxSignal = 1, chipMean = 150 , chipSd = 150 ,
    chipSmooth = 250 , stepSize = 10 ,
    removeBackground = 0 , thetaThreshold = 0.1)
```

As it is the case with `genomicProfileParameters`, it is also possible
to *access/set* each slot individually after having created
an `occupancyProfileParameters` object.
Each slot is described as the following:

* `ploidy`, the ploidy level of the of the organism of interest
(Default is set at 2). This only considers simple polyploidy (or haploidy).
The model does not (yet) consider hybrids such as wheat.

```{r, eval=FALSE}
ploidy(OPP)
ploidy(OPP) <- 2
```

* `boundMolecules`, a positive integer (or vector of positive integers)
describing the number of bound molecules (Transcription factors) to DNA
(Default value is set at 2000). In this model, occupancy is reliant on the
number of bound molecules. The number of molecules will influence
the goodness of fit of the model. It is possible to infer the number of
bound Molecules by using the `computeOptimal` function.
For more information, see `computeOptimal` and `profileAccuracyEstimate`.

```{r, eval=FALSE}
boundMolecules(OPP)
boundMolecules(OPP) <- 5000
```

* `backgroundSignal`, a numeric value representing the background Signal
in real ChIP-seq data (Default is set at 0). It is strongly advised to
set this parameter to the background Signal of
the ChIP-seq data you will be using.

```{r, eval=FALSE, echo=TRUE}
backgroundSignal(OPP)

backgroundSignal(OPP) <- 0.02550997
```

* `maxSignal`, a numeric value representing the maximum signal in
real ChIP-seq data (Default is set at 1). It is strongly advised to set
this parameter to the maximum Signal of the ChIP-seq data you will be using.

```{r, eval=FALSE, echo=TRUE}
maxSignal(OPP)

maxSignal(OPP) <- 1.86
```

* `chipMean`,  a numeric value representing the average peak width in base
pairs in real ChIP-seq data (Default is set at 150). It is strongly advised
to set this parameter to the average peak width
of the ChIP-seq data you will be using.

```{r, eval=FALSE, echo=TRUE}
chipMean(OPP)

chipMean(OPP) <- 150

```

* `chipSd`, a numeric value representing the standard deviation of
peak width in real ChIP-seq data (Default is set at 150).
It is strongly advised to set this parameter to the SD peak
width of the ChIP-seq data you will be using.

```{r, eval=FALSE, echo=TRUE}
chipSd(OPP)

chipSd(OPP) <- 150
```

* `chipSmooth`, a numeric value representing the size of the window
used for smoothing the profile (Default is set at 250).
The goal of ChIPAnalyser is to produce ChIP-seq like profile
from predicted high occupancy
sites. In order to mimic these ChIP-seq profile, a smoothing
algorithm is used to smooth occupancy profiles. This algorithm uses
ChIP-seq parameters such as
`chipMean`, `chipSd`, `maxSignal`, `backgroundSignal` and `chipSmooth`.

```{r, eval=FALSE, echo=TRUE}
chipSmooth(OPP)

chipSmooth(OPP) <- 250
```

* `stepSize`, a numeric value describing the bin size (in base pairs) used
for computing ChIP-seq like profiles (Default is set at 10).
In the case of long sequences, it not always necessary to include
ChIP-like occupancy at every base pair (mainly for speed and memory usage).
`stepSize` will determine the size of the bins used to split your sequence
of interest. As an example, if your sequence is 16 000 bp long with a
`stepSize` of 10, the resulting profile will be composed of
1600 occupancy points.

```{r, eval=FALSE, echo=TRUE}
stepSize(OPP)

stepSize(OPP) <- 10
```

* `removeBackground`, a numeric value describing a threshold at
which Occupancy signals must be removed (Default is set at 0).

```{r, eval=FALSE, echo=TRUE}
removeBackground(OPP)

removeBackground(OPP) <- 0
```

* `thetaThreshold`, a numeric value describing the threshold used to
calculate our in house *theta* value (Default is set at 0.1).
*Theta* is a metric used to demonstrate which parameters are optimal
by maximising the correlation and minimising the Mean Squared Error
(MSE) between the predicted profile and actual ChIP-seq profiles.
The higher the value of *theta*, the better the ratio between correaltion
and MSE. Values below this threshold are discarded
(replaced by Threshold) as they represent
extremely poor accuracy with actual ChIP-seq data.

```{r, eval=FALSE, echo=TRUE}
thetaThreshold(OPP)

thetaThreshold(OPP) <- 0.1
```


# Work Flow - Analysis

Once a `genomicProfileParameter` object has been established,
the rest of the analysis becomes fairly straight forward. Unless,
you already have prior knowledge on the number of bound molecules
(`boundMolecules`) and the PWM scaling factor (`ScalingFactorPWM` or
referred to as *lambda*), we advise you to first infer the optimal
set of parameters as described in `computeOptimal`. However, as this
function is essentially a combination of all other functions in the
package (with a little bit more magic to it), we will overview a simple
analysis work flow first and finish with `computeOptimal` function and
its associated plotting function `plotOptimalHeatMaps`.

## Genome Wide Scoring

In order to score the entire genome (or the accessible genome),
it is possible to use the `computeGenomeWidePWMScore` function.
The output of this function will be influenced by the value assigned
to `lambda`. If more than one value was assigned to the scaling factor,
parameters dependant on lambda will be updated accordingly
(computed for each value of lambda).
The arguments of the function are the following :

```{r, eval=F}
computeGenomeWidePWMScore(DNASequenceSet, genomicProfileParameters,
    DNAAccessibility = NULL,  GenomeWide = TRUE, verbose = TRUE)
```

### Input Data - Genome Wide scoring

As input, `computeGenomeWidePWMScore` requires to obligatory arguments:
`DNASequenceSet` and `genomicProfileParameters`. `DNASequenceSet`
comes in the form of the following:

```{r, eval=TRUE, warnings = FALSE, echo=TRUE}
DNASequenceSet
```
`DNASequenceSet` may also come in the form of a `BSgenome` object.
However, we advise to use a DNAStringSet for a question of ease and speed.
If you are unfamiliar with `BSgenome` and `DNAStringSet`,
the following example demonstrates how to use these objects in this context.

```{r, eval=TRUE, warnings = FALSE}
#Extracting DNAStringSet from BSgenome

DNASequenceSet <- getSeq(BSgenome.Dmelanogaster.UCSC.dm3)

```

As a reminder a `genomicProfileParameters` are presented in
the following format:

```{r, eval=TRUE, warnings = FALSE, echo=TRUE}
GPP


```

`DNAAccessibility` is an optional argument in `computeGenomeWidePWMScore`.
If present, then the genome will be scored
only on the accessible DNA. `DNAAccessibility` comes as a `GRanges`
containing accessible DNA sites.

```{r, eval=TRUE, warnings = FALSE, echo=TRUE}
# DNA accessibility
Access
```
Finally, `verbose` will determine if
progress messages should be printed in the console.

### computeGenomeWidePWMScore

As an example of `computeGenomeWidePWMScore` usage:

```{r, eval=FALSE, warnings = FALSE, echo=TRUE}
# With DNAAccessibility

GenomeWide <- computeGenomeWidePWMScore(DNASequenceSet = DNASequenceSet,
    genomicProfileParameters = GPP, DNAAccessibility = Access)

GenomeWide

# Without DNA accessibility

GenomeWide <- computeGenomeWidePWMScore(DNASequenceSet = DNASequenceSet,
    genomicProfileParameters = GPP)
GenomeWide
```

## Scoring sites above threshold

Once genome wide metrics have been computed, the next step in the analysis
is to extract sites above threshold
(Sites with strong binding sites according to PWM Scores).
The `computePWMScore` function will score the genome and extract sites
above a local threshold
(dependant on `PWMThreshold`, `maxPWMScore` and `minPWMScore`).
The arguments of this functions are the following:

```{r, eval=FALSE}
computePWMScore(DNASequenceSet, genomicProfileParameter,
    setSequence = NULL, DNAAccessibility = NULL,verbose = TRUE)
```

### Input Data - Sites Above threshold

Only two arguments are absolutely required: `DNASequenceSet`
and `genomicProfileParameters`. However, `setSequence` represents the Loci
of interest. If `setSequence = NULL`, then sites above threshold will
computed and extracted on a genome wide scale (or accessible genome if
DNA Accessibility is provided).
`DNASequenceSet` and `DNAAccessibility` are in the same format as previously
described (`verbose` plays the same role as previously described).
`setSequence` is a `GRanges` representing the loci of interest
(may contain more than one loci/range) and comes in the following format:

```{r, eval=TRUE, warnings = FALSE, echo=TRUE}
eveLocus
```

An important aspect to mention, is that it is imperative you name your
loci of interest (not to be confused with `seqnames`).
If you are unfamiliar with GRanges, the following examples demonstrates
naming in the context of ChIPAnalyser. We recommend getting acquainted
with GenomicRanges as many aspect of ChIPAnalyser require the use of GRanges.

```{r, eval=TRUE, warnings = FALSE, echo=TRUE}
# Sequence names of Loci
seqnames(eveLocus)

# Names of Loci

names(eveLocus)

# Naming Loci in GRanges
names(eveLocus) <- "eve"
```

### computePWMScore

To compute PWM Scores at sites above threshold:

```{r, eval=FALSE, warnings = FALSE, echo=TRUE}
# With DNA Accessibility

PWMScores <- computePWMScore(DNASequenceSet = DNASequenceSet,
    genomicProfileParameters = GenomeWide,
    setSequence = eveLocus, DNAAccessibility = Access)
PWMScores

# Without DNA Accessibility

PWMScores <- computePWMScore(DNASequenceSet = DNASequenceSet,
    genomicProfileParameters = GenomeWide,
    setSequence = eveLocus)
PWMScores
```

As you can see, the `genomicProfileParameters` argument is
the `genomicProfileParameters` object computed in the previous example.
ChIPAnalyser works in a sequential manner: resulting object from one
functions are often parsed as arguments to other functions.
Finally, if your sequence of interest does not contain any accessible DNA,
you will be notified during the computation and it is possible to extract
inaccessible loci by using `NoAccess(PWMScores)`
(See NoAccess slot in `genomicProfileParameters`).

## Occupancy

Occupancy scores are computed using the formula described in **Methods**.
It is worth mentioning that Occupancy scores are dependant on values
assigned to `ScalingFactorPWM`  and `boundMolecules`.
If more than one value were to be assigned to these parameters, the resulting
output will be a combination of both. For more information
see the `computeOccupancy` example as we will demonstrate  multiple value
computation (Single Value for lambda and boundMolecules will return an
object identical in structure as with multiple values).
The arguments for `computeOccupancy` are the following:

```{r,eval=FALSE}
computeOccupancy(AllSitesPWMScore, occupancyProfileParameters = NULL,
    norm = TRUE,verbose = TRUE)
```

### Input Data - Occupancy

`computeOccupancy` requires  a `genomicProfileParameters` object result
of the previous function (`computePWMScore`). If you are unsure,
if your  `genomicProfileParameter` contains the right information,
it is possible to check by using:

```{r, eval=FALSE, warnings = FALSE, echo=TRUE}
AllSitesAboveThreshold(PWMScores)
```
If your GRanges does not contain PWMScore as a metadata column,
you are either using the wrong object or you have not yet computed PWM Scores.

`occupancyProfileParameters` is an `occupancyProfileParameters` object.
If not provided, a new one will be generated internally.
As previously mentioned, we strongly recommend to set those parameters
to improve the model's goodness of it.
As a reminder, a `occupancyProfileParameters`
object (previously created -
see section **Data object - Occupancy profile Parameters**)
should print on the screen as follows:

```{r, eval=TRUE, warnings = FALSE, echo=TRUE}
OPP
```
Finally, if `norm = TRUE`, the occupancy profiles will be normalised
and `verbose = TRUE` progress messages will be printed to the console.

### computeOccupancy

To compute Occupancy scores with `computeOccupancy`:

```{r, eval=FALSE, warnings = FALSE, echo=TRUE}
Occupancy <- computeOccupancy(AllSitesPWMScore = PWMScores,
    occupancyProfileParameters = OPP)
Occupancy
```

As it is the case in the previous functions, `AllSitesPWMScore` should be the
result of the previous function (`computePWMScore`). `computeOccupancy` will
return a `genomicProfileParameters` object with an updated
`AllSitesAboveThreshold` slot. This slot should now contain a list
of GRangesLists containing GRanges (one for each Loci of interest)
with two metadata columns (PWMScore and Occupancy).
Each element in the list is named with the specific combination of
*lambda* and *boundMolecules* used to compute this set of occupancies.
Finally, if your sequence of interest does not contain any accessible DNA,
you will be notified during the computation and it is possible to extract
inaccessible loci by using `NoAccess(PWMScores)`
(See NoAccess slot in `genomicProfileParameters`).



## ChIP-seq like profiles

The ultimate goal of ChIPAnalyser is to produce *ChIP-seq like* profile
from occupancy data (from sites that display a high TF occupancy).
`computeChipProfile` creates *ChIP-seq like* profiles from occupancy
data by smoothing occupancy *profiles* and mimicking real ChIP-seq data.
The arguments of `computeChipProfile` are the following:

```{r, eval=FALSE}
computeChipProfile( setSequence ,
    occupancy, occupancyProfileParameters = NULL, norm = TRUE,
    method = c("moving_kernel","truncated_kernel","exact"),
    peakSignificantThreshold= NULL,
    verbose = TRUE)
```

### Input data - ChIP-seq profiles
The `computeChipProfile` function requires two compulsory arguments
`setSequence` and `occupancy`. `setSequence` is a GRanges describing the
loci of interest (this is the same GRanges used in `computePWMScore`).
`occupancy` is  a `genomicProfileParameters` object result of
`computeOccupancy` function. To make sure this is the right
`genomicProfileParameters`, you may use `AllSitesAboveThreshold()`
(See AllSitesAboveThreshold slot description above).
`occupancyProfileParameters` is an `occupancyProfileParameters` object.
If not supplied, it will be generated *de novo* internally.
Once again, we recommend to set the parameters of this object in relationship
to real ChIP-seq data. `norm = TRUE` and `method`
respectively represent if the ChIP-seq like profile should be normalised
and if you wish to use an approximation for ChIP-seq profile or not.
`moving_kernel` will use Rcpp to approximate and compute peaks,
`truncated_kernel` will also approximate peaks but without using Rcpp,
and `exact` will not approximate peaks. These methods represent different
way of computing and/or approximating ChIP-seq peaks.
Finally, `peakSignificantThreshold` is a threshold at which peaks will be
selected. If you select "moving_kernel" then this threshold is a numeric value
describing the peak tail hight cut-off value. The default in this
case is 0.001.
In the case of "truncated_kernel" and "exact", the threshold
represents a distance in base pair from the peak summit at which the peak
should be cut. In this case, default is set at 1250 base pairs.

It should be noted that these methods will produce very similar results.
And by very similar results, we mean nearly identical.

### computeChipProfile

To generate a ChIP-seq like profile:

```{r, eval=FALSE, warnings = FALSE, echo=TRUE}
chipProfile <- computeChipProfile(setSequence = eveLocus,
    occupancy = Occupancy,occupancyProfileParameters = OPP)
chipProfile
```
The output of this functions is slightly different as it returns a named
list (each element in the list is named after the specific combination
of *lambda* and *boundMolecules* used to compute occupancies) containing
a GRangesList of GRanges with ChIP profile values as a metadata column.
These GRanges also differ in the sense that they now contain the whole
loci (or accessible loci) cut into bins of size equal to  `stepSize`
(See stepSize slot in `occupancyProfileParameters`). Each GRangesList
contains GRanges for each Loci of interest.

## Searching through SitesAboveThreshold and ChIP-seq profiles

As described previously, The size of the `AllSitesAboveThreshold` slot will
increase drastically as the number of values assigned to `ScalingFactorPWM`
(or `lambda`) and `boundMolecules` increases.
In order to navigate and search this slot with ease, it is possible to use
the `searchSites` function. This function may also be used on predicted
ChIP-seq profiles (result of `computeChipProfile`). `searchSites` comes
in the following form:

```{r, eval=FALSE,echo=TRUE}
searchSites(Sites,ScalingFactor="all", BoundMolecules="all",Locus="all")
```
It is possible to use this function as a simple extraction method
similarly to the `AllSitesAboveThreshold` method. In this case, the usage
is the following:

```{r, eval=TRUE, echo=TRUE}
searchSites(Occupancy)
```
If you wish to navigate and extract only certain combinations of
`ScalingFactorPWM` and/or `boundMolecules` and/or Loci, `searchSites` could be
use as shown below:

```{r, eval=TRUE, echo=TRUE}

searchSites(chipProfile, ScalingFactor=c(1.5,2.5), BoundMolecules=c(1000,1500)
    ,Locus=c("eve","odd"))
```

## Estimating the accuracy of the model

In order to determine how accurate the predicted model is, it is possible
to compare the predicted *ChIP-seq like profile*
(as built in `computeChipProfile`) to real ChIP-seq data for a
given Transcription Factors at loci of interest.  `profileAccuracyEstimate`
provides a way to compare both profiles.
The arguments for this function are the following:

```{r, eval=FALSE}
profileAccuracyEstimate(LocusProfile,
    predictedProfile, occupancyProfileParameters = NULL)
```

### Input data - Accuracy Estimate
`profileAccuracyEstimate` requires only three arguments. `precitedProfile`
is the result of `computeChipProfile` and `occupancyProfileParameters`
is a `occupancyProfileParameters`. Finally, `LocusProfile`
is a list containing actual ChIP-seq profiles.
These profiles should be normalised to a base pair level.
In other words, a peak should be divided by its width.
We also strongly recommend that each loci in `LocusProfile`
(each element of the list) should be named in an identical manner
as the loci used in `setSequence` (See previous functions).
This list should come in the following format:

```{r, eval=TRUE, warnings = FALSE, echo=TRUE}
str(eveLocusChip)
```

In this example, there is only one element in the list. However,
this list can be as long as you wish and contain all the Loci
that you are interested in.

### profileAccuracyEstimate

To test the accuracy the model against ChIP-seq data:

```{r, eval=FALSE, warnings = FALSE, echo=TRUE}
AccuracyEstimate <- profileAccuracyEstimate(LocusProfile = eveLocusChip,
    predictedProfile = chipProfile, occupancyProfileParameters = OPP)
AccuracyEstimate
```
The result of this function will be a list of accuracy estimates for every
loci and every combination of `ScalingFactorPWM` and `boundMolecules`.
The correlation and Mean Squared Error (MSE) represents the correlation and
MSE between the predicted profile
(for a given combination on `lambda` and `boundMolecules`)
and the ChIP-seq profile for the same loci. `meanCorr` and `meanMSE`
describe the average correlation and MSE for all loci
(for a given combination on `ScalingFactorPWM` and `boundMolecules`).
The idea behind average correlation and MSE is that the scaling factor
and number of molecules should be the same regardless of the loci as all
TF's are contained within the same nucleus. Finally, `meanTheta` is an in
house metric describing a modified ratio of correlation over MSE.
The goal is to find the sweet spot between high correlation and
low MSE (see `computeOptimal` and `plotOptimalHeatMaps`).

## Finding optimal Parameters

As described previously, it is not always possible to know the optimal
set of parameters for `ScalingFactorPWM` and `boundMolecules`.
`ChIPAnalyser` offers the possibility to backward infer the parameters
using the `computeOptimal` function. By testing different combinations
of `ScalingFactorPWM` and `boundMolecules`, this function will return the
combination with the highest correlation , lowest Mean Squared Error or
highest theta depending on which parameter was selected. As a reminder,
theta is an in house metric representing a modified ratio of correlation
over MSE ( extreme values are replaced by threshold). The goal is to find
the sweet spot between high correlation and low MSE.
Values that should be tested for `ScalingFactorPWM` and for
`boundMolecules` should be provided by user.
If these values are not provided (default value and only one value
for each parameter), then they will be assigned internally.
The internal values are the following:

```{r,eval=FALSE}
ScalingFactorPWM(genomicProfileParameters) <- c(0.25, 0.5, 0.75, 1, 1.25,
        1.5, 1.75, 2, 2.5, 3, 3.5 ,4 ,4.5, 5)

boundMolecules(occupancyProfileParameters) <- c(1, 10, 20, 50, 100,
        200, 500,1000,2000, 5000,10000,20000,50000, 100000,
        200000, 500000, 1000000)
```
In terms of its arguments,`computeOptimal` can be described as:

```{r, eval=FALSE}
computeOptimal(DNASequenceSet,
    genomicProfileParameters,
    LocusProfile,
    setSequence,
    DNAAccessibility = NULL,
    occupancyProfileParameters = NULL,
    parameter = "all",
    peakMethod="moving_kernel")
```
**Please note that this functions will take some time to complete.
Do not be alarmed if it seems to have stalled.**

### Input Data - Optimal Parameters

`computeOptimal` is essentially a combination of previous functions
(with a bit more magic to it). For this reason, data input in extremely
similar to the functions  described above. As a quick reminder:

* `DNASequenceSet`, a DNAStringSet (or BSgenome) containing the sequences of
the organism of interest.
* `genomicProfileParameters`, a `genomicProfileParameters` object containing
at least a *Position Weight Matrix* or *Position Frequency Matrix*.
All other slots will be computed internally.
* `LocusProfile`, a named list of ChIP-seq profile for loci of interest.
* `setSequence`, a named GRanges containing loci of interest.
* `DNAAccessibility`, a GRanges containing Accessible DNA.
* `occupancyProfileParameters`, an `occupancyProfileParameters` object.
Although optional, we strongly advise to tailor this object by using values
directly extracted from `LocusProfile`

`parameter` defines which metric you wish to compute.
There are four possible choices: *correlation, MSE, theta* or *all*.
It is imperative that the lists/GRanges are named with the name of
the Loci of interest.
`peakMethod`describes if you wish to use an approximation for ChIP-seq profile
peaks.
`moving_kernel` will use Rcpp to approximate and compute peaks,
`truncated_kernel` will also approximate peaks but without using Rcpp,
and `exact` will not approximate peaks. These methods represent different
way of computing and/or approximating ChIP-seq peaks.


### computeOptimal

As a example describing the usage of `compute optimal`

```{r, eval=FALSE, warnings = FALSE}
optimalParam <- computeOptimal(DNASequenceSet = DNASequenceSet,
    genomicProfileParameters = GPP,
    LocusProfile = eveLocusChip,
    setSequence = eveLocus,
    DNAAccessibility = Access,
    occupancyProfileParameters = OPP,
    parameter = "all")
optimalParam
```

This functions returns either a list or a list of lists
(if "all" parameter was selected). Each element in the list represents
the **optimal set of parameters**, the **optimal matrix**
(a matrix with correlation, MSE and/or theta computed for a given
combination of `ScalingFactorPWM` and `boundMolecules`) and
finally the **selected parameter**.

# Plotting Results
As it is the case in mamy fields, data visualisation is a key aspect
in any analysis. For this purpose, `ChIPAnalyser` offers
two plotting functions: `plotOptimalHeatMaps` and `plotOccupancyProfile`.

## Optimal Parameters

Once you have computed the optimal set of parameters, it is possible to
plot these results in the form of a heat map using `plotOptimalHeatMaps`.
Depending on what you are interested in, this function will either
plot *correlation ,MSE, theta* or *all of the previous*.
This functions requires minimal input as described below:

```{r, eval=F}
plotOptimalHeatMaps(optimalParam=optimalParam ,
    parameter="all", Contour=TRUE)
```

### Input Data & Plotting
`plotOptimalHeatMaps` only requires one data input in the form of the
result of `computeOptimal` (see `computeOptimal`). The `parameter` argument
defines which of the following parameters you wish to plot:
*correlation ,MSE, theta* or *all of the previous*. Finally, `Contour`
defines if you which to plot Contour lines on your heat map. As an example:

```{r, eval=FALSE, warnings = FALSE, echo=TRUE, fig.width=4, fig.height=10}
plotOptimalHeatMaps(optimalParam, parameter="all")
```


See plot in **Quick Guide**

The boxed tile represents the highest correlation or theta for a given
combination of `ScalingFactorPWM` and `boundMolecules`.
In the case of MSE the boxed tile represents the lowest Mean Squared Error.

## Plotting Profiles

`ChIPAnalyser` produces ChIP-seq like profiles. It is possible to plot these
profiles but also to add a variety of features to these plots.
`plotOccupancyProfile` takes care of plotting with the following arguments:

```{r,eval=FALSE, fig.width=4, fig.width=10, fig.height=3}
plotOccupancyProfile <- function(predictedProfile,
    setSequence,
    profileAccuracy = NULL,
    chipProfile = NULL,
    occupancy = NULL,
    PWM=FALSE,
    DNAAccessibility = NULL,
    occupancyProfileParameters = NULL,
    geneRef = NULL)
```


### Input Data & Profiles
In order to increase plotting flexibility, `plotOccupancyProfile`
only plots one profile at a time. In practice, this means that only
simple data units should be parsed to this functions.
This also means that the main title is left to the user discretion.
The arguments described above should come in the following format:

* `precitedProfile`, a GRanges object containing the predicted ChIP-seq
like profile for one locus and one combination of `lambda`
and `boundMolecules`.
* `setSequence`, a GRanges object containing the locus of interest.
* `profileAccuracy`, the profile Accuracy estimate for one loci and
for one combination of `lambda` and `boundMolecules`
* `chipProfile`, a vector containing ChIP-seq data for locus of interest.
In previous functions, ChIP-seq data was stored in a named list.
In this case, it is the individual numeric vector contained within that list.
* `occupancy`, a GRanges object containing both PWMScore and Occupancy.
This GRanges is the result of `computeOccupancy` and should only contain a
GRanges object for one locus and one combination of `lambda`
and `boundMolecules`.
* `PWM`, a logical operator indicating wherever you wish to plot
*occupancy* or *PWMScores*. It is necessary to also include `occupancy` data.
* `DNAAccessibility`, a GRanges object containing DNAAccessibility.
DNAAccessibility is similar to DNAAccessibility data described previously.
* `occupancyProfileParameters`, an `occupancyProfileParameters` object.
This object should be the same as the one used in functions described above.
However, the minimal requirement is that the `stepSize` slot
remains consistent with `stepSize` used previously.
As a reminder, stepSize default value is set at 10.
* `geneRef`, a List containing genetic information
(3'UTR, 5'UTR, exons, intron and enhancers). Each element of this list,
is a GRanges containing the information regarding
3'UTR, 5'UTR, exons, intron and enhancers.

As this object has not yet be described, `geneRef` should come in a
similar format as the following:

```{r, eval=TRUE, warnings = FALSE, echo=TRUE}
geneRef

```

It should be noted that only two arguments are necessary
(`predictedProfile` and `setSequence`).
The more arguments are provided the more information will be plotted.
As an example:

```{r, eval=FALSE, warnings = FALSE, echo=TRUE}
plotOccupancyProfile(predictedProfile=chipProfile[[1]][[1]],
    setSequence=eveLocus,
    profileAccuracy = AccuracyEstimate[[1]][[1]],
    chipProfile = eveLocusChip[[1]],
    occupancy = AllSitesAboveThreshold(Occupancy)[[1]][[1]],
    DNAAccessibility = Access,
    occupancyProfileParameters = OPP,
    geneRef =geneRef)
```




# Session Information
```{r, eval=TRUE, warnings = FALSE, echo=TRUE}
sessionInfo()
```

# References

Zabet NR, Adryan B (2015) Estimating binding properties of transcription
factors from genome-wide binding profiles. Nucleic Acids Res., 43, 84–94.
