head	1.2;
access;
symbols
	mkfiles_rev1:1.1.0.2;
locks; strict;
comment	@# @;


1.2
date	2008.08.20.06.00.59;	author davidgb;	state Exp;
branches;
next	1.1;
commitid	103148abb2444567;

1.1
date	2008.04.18.22.27.37;	author davidgb;	state dead;
branches
	1.1.2.1;
next	;
commitid	3485480920554567;

1.1.2.1
date	2008.04.18.22.27.37;	author davidgb;	state Exp;
branches;
next	;
commitid	3485480920554567;


desc
@@


1.2
log
@merged mkfiles_rev1 branch to the mainline
@
text
@#===================================================================
# File:        Makefile
# Author:      David Burnette 
# Created:     July 5, 2007
# 
# Description: 
#  Makefile to build the System09 by John Kent
# 
#  This makefile will build John Kent's entire System09 project 
#  (RTL synthesis and monitor ROMs) and even download the final 
#  bitstream to the prototype board.
# 
#  You can use Xilinx ISE interactively to add new RTL source files
#  to this project.
#
# Usage:
#  Use 'make help' to get a list of options.
#
# Dependencies:
#  Depends on makefile fragments in the 'MKFRAGS' directory.
#
# Revision History:
#   dgb  2007-07-05  Original version
#
#   dgb  2008-04-07  Split out files into fragments. Modified
#                    ROM source generation to be per src directory.
#
#===================================================================

MKFRAGS := ../../mkfiles
export MKFRAGS

#===================================================================
# User-modifiable variables
#
# This name must match the name of the design in Xilinx ISE (case
# sensitive). 
DESIGN_NAME := my_system09
#
# Constraint file (unfortunately it cannot be extracted from ISE)
UCF_FILE    := my_system09.ucf
#
# Technology family (unfortunately it cannot be extracted from ISE)
FAMILY      := virtex5

# List of ROM VHDL files
roms:
	@@$(MAKE) -C ../../src/sys09bug sys09s3s.vhd
	@@$(MAKE) -C ../../src/Flex9 flex9ram.vhd


#===================================================================
# You should not need to edit anything below this line

# XESS Tools
XSLOAD     := C:/Progra~1/XSTOOLs/xsload.exe

include ../../mkfiles/xilinx_rules.mk

#===================================================================
# TARGETS

all: roms bit 

roms: $(ROMFILES)

debug_vars:
	@@$(ECHO) "XST_FILE    = '$(XST_FILE)'"
	@@$(ECHO) "PRJ_FILE    = '$(PRJ_FILE)'"
	@@$(ECHO) "HDL_FILES   = '$(HDL_FILES)'"
	@@$(ECHO) "PART        = '$(PART)'"
	@@$(ECHO) "DEVICE      = '$(DEVICE)'"
	@@$(ECHO) "SPEED       = '$(SPEED)'"
	@@$(ECHO) "PACKAGE     = '$(PACKAGE)'"
	@@$(ECHO) "UCF_FILE    = '$(UCF_FILE)'"
	@@$(ECHO) "BSD_FILE    = '$(BSD_FILE)'"
	@@$(ECHO) "XSTHDPDIR    = '$(XSTHDPDIR)'"
	@@$(ECHO) "TMPDIR    = '$(TMPDIR)'"

bit: roms $(DESIGN_NAME).bit

prom: $(DESIGN_NAME).mcs

xsload: $(DESIGN_NAME).bit
	@@$(ECHO)
	@@$(ECHO) "======= Downloading bitstream to XSA-3S1000 using XSLOAD (parallel) ="
	$(XSLOAD) -p 0 -b xsa-3s1000 -fpga $<

usbxsload.bit: $(DESIGN_NAME).bit
	@@$(ECHO)
	@@$(ECHO) "======= Generating special bitstream with StartUpClk=JtagClk ========"
	$(GREP) -v StartUpClk $(BITGEN_OPTIONS_FILE) >tmp.ut
	$(ECHO) "-g StartUpClk:JtagClk" >>tmp.ut
	$(BITGEN) $(BITGEN_FLAGS) -f tmp.ut $(DESIGN_NAME).ncd usbxsload.bit

usbxsload: usbxsload.bit
	@@$(ECHO)
	@@$(ECHO) "======= Downloading bitstream to XSA-3S1000 using XSLOAD (USB) ======"
	$(XSLOAD) -usb 0 -b xsa-3s1000 -fpga usbxsload.bit

impact: $(DESIGN_NAME).bit
	@@$(ECHO)
	@@$(ECHO) "======= Downloading bitstream to XSA-3S1000 using Impact ============"
	-@@$(RM) $(DESIGN_NAME)_impact.cmd
	@@$(ECHO) "setMode -bscan" >>$(DESIGN_NAME)_impact.cmd
	@@$(ECHO) "setCable -p auto" >>$(DESIGN_NAME)_impact.cmd
	@@$(ECHO) "addDevice -p 1 -file $(BSD_FILE)" >>$(DESIGN_NAME)_impact.cmd
	@@$(ECHO) "assignFile -p 1 -file $<" >>$(DESIGN_NAME)_impact.cmd
	@@$(ECHO) "program -p 1" >>$(DESIGN_NAME)_impact.cmd
	@@$(ECHO) "quit" >>$(DESIGN_NAME)_impact.cmd
	$(IMPACT) -batch $(DESIGN_NAME)_impact.cmd

.PHONY: help
help:
	@@$(ECHO) "Use this Makefile to regenerate the entire System09 bitstream"
	@@$(ECHO) "after modifying any of the source RTL or 6809 assembler code."
	@@$(ECHO) ""
	@@$(ECHO) "This makefile uses the following project files from the Xilinx ISE"
	@@$(ECHO) "   $(XST_FILE)"
	@@$(ECHO) ""
	@@$(ECHO) "You use Xilinx ISE interactively to add new RTL source files."
	@@$(ECHO) ""
	@@$(ECHO) "            Availiable targets"
	@@$(ECHO) 
	@@$(ECHO) "  For building all or part of the system:"
	@@$(ECHO) "    roms      - Run asm09 and then generate the VHDL RTL rom files"
	@@$(ECHO) "    bit       - Rebuild the entire system and generate the bitstream file"
	@@$(ECHO) "    all       - Rebuild everything"
	@@$(ECHO) "    prom      - Rebuild the entire system and generate an MCS prom file"
	@@$(ECHO) "    exo       - Rebuild the entire system and generate an EXO prom file"
	@@$(ECHO) 
	@@$(ECHO) "  For downloading the bitstream to the board:"
	@@$(ECHO) "    xsload    - Download the bitstream to the FPGA via XSLOAD"
	@@$(ECHO) "    usbxsload - Download the bitstream to the FPGA via XSLOAD"
	@@$(ECHO) "    impact    - Download the bitstream to the FPGA via iMPACT"
	@@$(ECHO) 
	@@$(ECHO) "  For project maintenance:"
	@@$(ECHO) "    help      - Print this help text"
	@@$(ECHO) "    clean     - Clean up the ISE files"
	@@$(ECHO) ""

.PHONY: clean
clean:
	-$(MAKE) -C ../../src/sys09bug clean
	-$(MAKE) -C ../../src/Flex9 clean
	-$(RM) *.ncd *.ngc *.ngd *.twr *.bit *.mcs *.stx *.ucf.untf *.mrp 
	-$(RM) *.ncl *.ngm *.prm *_pad.txt *.twx *.log *.syr *.par *.exo *.xpi
	-$(RM) *.cmd_log *.ngr *.bld *_summary.html *.nc1 *.pcf *.bgn
	-$(RM) *.pad *.placed_ncd_tracker *.routed_ncd_tracker *_pad.csv *.drc
	-$(RM) *.pad_txt $(DESIGN_NAME)_impact.cmd *.unroutes
	-$(RMDIR) _ngo _xmsgs

@


1.1
log
@file Makefile was initially added on branch mkfiles_rev1.
@
text
@d1 152
@


1.1.2.1
log
@new platform Xilinx ML506 board
@
text
@a0 152
#===================================================================
# File:        Makefile
# Author:      David Burnette 
# Created:     July 5, 2007
# 
# Description: 
#  Makefile to build the System09 by John Kent
# 
#  This makefile will build John Kent's entire System09 project 
#  (RTL synthesis and monitor ROMs) and even download the final 
#  bitstream to the prototype board.
# 
#  You can use Xilinx ISE interactively to add new RTL source files
#  to this project.
#
# Usage:
#  Use 'make help' to get a list of options.
#
# Dependencies:
#  Depends on makefile fragments in the 'MKFRAGS' directory.
#
# Revision History:
#   dgb  2007-07-05  Original version
#
#   dgb  2008-04-07  Split out files into fragments. Modified
#                    ROM source generation to be per src directory.
#
#===================================================================

MKFRAGS := ../../mkfiles
export MKFRAGS

#===================================================================
# User-modifiable variables
#
# This name must match the name of the design in Xilinx ISE (case
# sensitive). 
DESIGN_NAME := my_system09
#
# Constraint file (unfortunately it cannot be extracted from ISE)
UCF_FILE    := my_system09.ucf
#
# Technology family (unfortunately it cannot be extracted from ISE)
FAMILY      := virtex5

# List of ROM VHDL files
roms:
	@@$(MAKE) -C ../../src/sys09bug sys09s3s.vhd
	@@$(MAKE) -C ../../src/Flex9 flex9ram.vhd


#===================================================================
# You should not need to edit anything below this line

# XESS Tools
XSLOAD     := C:/Progra~1/XSTOOLs/xsload.exe

include ../../mkfiles/xilinx_rules.mk

#===================================================================
# TARGETS

all: roms bit 

roms: $(ROMFILES)

debug_vars:
	@@$(ECHO) "XST_FILE    = '$(XST_FILE)'"
	@@$(ECHO) "PRJ_FILE    = '$(PRJ_FILE)'"
	@@$(ECHO) "HDL_FILES   = '$(HDL_FILES)'"
	@@$(ECHO) "PART        = '$(PART)'"
	@@$(ECHO) "DEVICE      = '$(DEVICE)'"
	@@$(ECHO) "SPEED       = '$(SPEED)'"
	@@$(ECHO) "PACKAGE     = '$(PACKAGE)'"
	@@$(ECHO) "UCF_FILE    = '$(UCF_FILE)'"
	@@$(ECHO) "BSD_FILE    = '$(BSD_FILE)'"
	@@$(ECHO) "XSTHDPDIR    = '$(XSTHDPDIR)'"
	@@$(ECHO) "TMPDIR    = '$(TMPDIR)'"

bit: roms $(DESIGN_NAME).bit

prom: $(DESIGN_NAME).mcs

xsload: $(DESIGN_NAME).bit
	@@$(ECHO)
	@@$(ECHO) "======= Downloading bitstream to XSA-3S1000 using XSLOAD (parallel) ="
	$(XSLOAD) -p 0 -b xsa-3s1000 -fpga $<

usbxsload.bit: $(DESIGN_NAME).bit
	@@$(ECHO)
	@@$(ECHO) "======= Generating special bitstream with StartUpClk=JtagClk ========"
	$(GREP) -v StartUpClk $(BITGEN_OPTIONS_FILE) >tmp.ut
	$(ECHO) "-g StartUpClk:JtagClk" >>tmp.ut
	$(BITGEN) $(BITGEN_FLAGS) -f tmp.ut $(DESIGN_NAME).ncd usbxsload.bit

usbxsload: usbxsload.bit
	@@$(ECHO)
	@@$(ECHO) "======= Downloading bitstream to XSA-3S1000 using XSLOAD (USB) ======"
	$(XSLOAD) -usb 0 -b xsa-3s1000 -fpga usbxsload.bit

impact: $(DESIGN_NAME).bit
	@@$(ECHO)
	@@$(ECHO) "======= Downloading bitstream to XSA-3S1000 using Impact ============"
	-@@$(RM) $(DESIGN_NAME)_impact.cmd
	@@$(ECHO) "setMode -bscan" >>$(DESIGN_NAME)_impact.cmd
	@@$(ECHO) "setCable -p auto" >>$(DESIGN_NAME)_impact.cmd
	@@$(ECHO) "addDevice -p 1 -file $(BSD_FILE)" >>$(DESIGN_NAME)_impact.cmd
	@@$(ECHO) "assignFile -p 1 -file $<" >>$(DESIGN_NAME)_impact.cmd
	@@$(ECHO) "program -p 1" >>$(DESIGN_NAME)_impact.cmd
	@@$(ECHO) "quit" >>$(DESIGN_NAME)_impact.cmd
	$(IMPACT) -batch $(DESIGN_NAME)_impact.cmd

.PHONY: help
help:
	@@$(ECHO) "Use this Makefile to regenerate the entire System09 bitstream"
	@@$(ECHO) "after modifying any of the source RTL or 6809 assembler code."
	@@$(ECHO) ""
	@@$(ECHO) "This makefile uses the following project files from the Xilinx ISE"
	@@$(ECHO) "   $(XST_FILE)"
	@@$(ECHO) ""
	@@$(ECHO) "You use Xilinx ISE interactively to add new RTL source files."
	@@$(ECHO) ""
	@@$(ECHO) "            Availiable targets"
	@@$(ECHO) 
	@@$(ECHO) "  For building all or part of the system:"
	@@$(ECHO) "    roms      - Run asm09 and then generate the VHDL RTL rom files"
	@@$(ECHO) "    bit       - Rebuild the entire system and generate the bitstream file"
	@@$(ECHO) "    all       - Rebuild everything"
	@@$(ECHO) "    prom      - Rebuild the entire system and generate an MCS prom file"
	@@$(ECHO) "    exo       - Rebuild the entire system and generate an EXO prom file"
	@@$(ECHO) 
	@@$(ECHO) "  For downloading the bitstream to the board:"
	@@$(ECHO) "    xsload    - Download the bitstream to the FPGA via XSLOAD"
	@@$(ECHO) "    usbxsload - Download the bitstream to the FPGA via XSLOAD"
	@@$(ECHO) "    impact    - Download the bitstream to the FPGA via iMPACT"
	@@$(ECHO) 
	@@$(ECHO) "  For project maintenance:"
	@@$(ECHO) "    help      - Print this help text"
	@@$(ECHO) "    clean     - Clean up the ISE files"
	@@$(ECHO) ""

.PHONY: clean
clean:
	-$(MAKE) -C ../../src/sys09bug clean
	-$(MAKE) -C ../../src/Flex9 clean
	-$(RM) *.ncd *.ngc *.ngd *.twr *.bit *.mcs *.stx *.ucf.untf *.mrp 
	-$(RM) *.ncl *.ngm *.prm *_pad.txt *.twx *.log *.syr *.par *.exo *.xpi
	-$(RM) *.cmd_log *.ngr *.bld *_summary.html *.nc1 *.pcf *.bgn
	-$(RM) *.pad *.placed_ncd_tracker *.routed_ncd_tracker *_pad.csv *.drc
	-$(RM) *.pad_txt $(DESIGN_NAME)_impact.cmd *.unroutes
	-$(RMDIR) _ngo _xmsgs

@