RE: [ethmac] rx_ethmac

["Illan Glasner" <iglasner@zumanetworks.com>]

17-Feb-01

   Hi,

      Sorry for the mix word I guess this what happen when you replay
and run a netlist check in the same time.

Any way back to Premable and SFD the Pre Bye is define as 1010 and 1010
and SFD Byte as 1010 and 1101

since the first nibble in the SFD is like the nibble of the pre than
many time the machine simple look for 1010 and we reffare to it as pre
and thn for 1101 and we reffer to it as SFD 

BUT the MAC need to be able to find at least one nibble of 1010 and than
1101 before deciding that the packet has started.

the rest of the preamable byte are need to be checked but not need to be
presented and so your test bench need to test for different size of
preamable and this have to do with the "shrinking" of the preamable when
the packet go through repeters.

and so checking only for 1101 can make some mess in your MAC.

When it come to transmite than you must generate 7 byte of pre and 1
byte of sfd (well for specail purpose in point to point you can reduce
this to increase the effective bandwidth, but this is not standart so if
you do it make sure it is only an option).

in respect to RMII and MII there is no differance between the two the
RMII only come to solve pin count problem in high port number chip and
the main logic differance is in the behave of rxdv. 

have a nice day

   Illan


-----Original Message-----
From: Jamil Khatib [mailto:jamilkhatib75@yahoo.com]
Sent: Monday, February 19, 2001 3:34 AM
To: ethmac@opencores.org
Cc: mgalela@vlsi.itb.ac.id
Subject: RE: [ethmac] rx_ethmac


I do not know exactly what you are talking about but
as far as I know that the MAC should detect the
preamble and SFD and it should generate them on the
transmit side.
The whole bytes should be generated and checked
These notes are available at least on the MII and RMII
interfaces

Regards
Jamil Khatib

--- Mahmud Galela <mgalela@vlsi.itb.ac.id> wrote:
> 
> 
> I wonder what you are thinking about preamble and
> SFD (not
> SDF...just kidding) pattern. 
> From previous e-mail (long time ago) i concluded
> that the SFD nibble can
> come from phy without preceeded by 1010.
> It means SFD can be located at first nibble or
> second niblle in a byte of
> data.
> 
> 
> 
> Thanks 
> 
> 
> Mahmud
> 
> 
> 
> On Tue, 13 Feb 2001, Illan Glasner wrote:
> 
> > 13-Feb-01
> > 
> >    Hi,
> > 
> > 	I belive your SDF detect is somewhat wrong.
> > 
> > as soon as you see rxdv you start to look for SDF
> > 
> > and your SFD is when you see 1101 
> > 
> > BUT the std specify SDF as both 0101 AND 1101
> togther and not only the
> > second nibble.
> > 
> > this mean unless I'm mistaken and do correct me if
> I missed soemthing
> > but that if the packet come with let say junk
> nibble and one of the junk
> > nibble have 1101 than you machine will thing it is
> a real packet and
> > will start reading it.
> > 
> > more over you might be not align as the 1101 might
> come in the first
> > nibble and not the second one.
> > 
> > have a nice day
> > 
> >    Illan
> 


__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail - only $35 
a year!  http://personal.mail.yahoo.com/