[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[openrisc] generating of .exo

To: <openrisc@opencores.org>
Subject: [openrisc] generating of .exo
From: "kw@nie" <kwanie@pacific.net.sg>
Date: Mon, 25 Feb 2002 18:42:54 +0800
References: <1013712864.6475.11.camel@asic1.lowrance.com> <07f301c1b5ef$074ef1f0$4901010a@tyr>
Reply-To: openrisc@opencores.org
Sender: owner-openrisc@opencores.org

Hi Damjan,

I am wondering how the .exo files (classic.exo and linux-35.exo) for the
OR1200 demos on the XSV800 board were generated.

I have looked at PROMGen from Xilinx and it seems to take only .bit files.
Can you kindly advise how the .exo for the demos were generated such that
the firmware and the Virtex's configuration exist in a single file. Any help
would be very much appreciated.

Please accect my apology for the posting a question that is not directly
related to the OpenRISC.

Cheers,
kwanie

--
To unsubscribe from openrisc mailing list please visit http://www.opencores.org/mailinglists.shtml

References:
- [openrisc] OR1000 16 bit instruction set
  - From: Jeff Hanoch <jeff@lowrance.com>
- Re: [openrisc] OR1000 16 bit instruction set
  - From: "Marko Mlinar" <markom@opencores.org>

Prev by Date: Re: [openrisc] Re: openrisc-digest V1 #98
Next by Date: Fw: [openrisc] generating of .exo
Prev by thread: Re: [openrisc] OR1000 16 bit instruction set
Next by thread: Re: [openrisc] Mining, Equipment
Index(es):
- Date
- Thread