Re: [openrisc] or32-rtems-gcc install question

[Marko Mlinar <markom@opencores.org>]

You forgot to specify (or you specified) PATH incorrectly.

Marko

On Thursday 22 August 2002 18:38, SUNGYON@aaww.com wrote:
> Thank you very much for you reply! Lampret. Simon.
> I fulfilly executed the or32-rtems instruction of ATS scripts.
> But i didn't use it directly due to some already-positioned directory.
> So, the automatic e-mail report doesn't exist, but
> If i am fortunate, you will give me quick explanation about the following
> problem.
> Have you ever seen the following install error?
> Where the asm file libgcc1.S have many lines including "l." and the dots
> are causing error in GNU as.
> I tried to find the reason in web and many documentation, but could not
> find. If the problem is much complicated one of 'configure and make', i
> will run the full ATS.
> Plz help me.
>
> -----------------libgcc1.S------------------------
>         .align 4
>         .global ___udivsi3
> ___udivsi3:
>         l.addi          r1,r1,-4
>         l.sw            0(r1),r9
>         l.addi          r11,r0,0
>         l.addi          r8,r4,0
>         l.addi          r5,r3,0
>         l.sfne          r8,r11
>         l.bnf           4f
> -------------omitted -----------------------------
>
> --------------- in the install screan --------------------
> cp ../../gcc/gcc/config/or32/or32.S libgcc1.S
> for name in __udivsi3 __divsi3 __umodsi3 __modsi3; \
> do \
>   echo ${name}; \
>   /home/sylee/or1k/b-gcc/gcc/xgcc -B/home/sylee/or1k/b-gcc/gcc/
> -B/usr/local/or32-rtems/bin/ -I/usr/local/or32-rtems/include -O2
> -I../../gcc/gcc/../newlib/libc/sys/rtems/include -DCROSS_COMPILE -DIN_GCC  
>   -g -O2 -I./include   -g1 -DHAVE_GTHR_DEFAULT -DIN_LIBGCC2
> -D__GCC_FLOAT_NOT_NEEDED -Dinhibit_libc  -I. -I../../gcc/gcc
> -I../../gcc/gcc/config
> -I../../gcc/gcc/../include -c -DL${name} libgcc1.S; \
>   if [ $? -eq 0 ] ; then true; else exit 1; fi; \
>   mv libgcc1.o ${name}.o; \
>   or32-rtems-ar rc tmplibgcc1.a ${name}.o; \
>   rm -f ${name}.o; \
> done
> __udivsi3
> /tmp/cclh1lxm.s: Assembler messages:
> /tmp/cclh1lxm.s:5: Error: invalid character '.' in mnemonic
> /tmp/cclh1lxm.s:6: Error: invalid character '.' in mnemonic
> /tmp/cclh1lxm.s:7: Error: invalid character '.' in mnemonic
> /tmp/cclh1lxm.s:8: Error: invalid character '.' in mnemonic
> /tmp/cclh1lxm.s:9: Error: invalid character '.' in mnemonic
> /tmp/cclh1lxm.s:10: Error: invalid character '.' in mnemonic
>
> -------------- omitted-----------------------------------------

--
To unsubscribe from openrisc mailing list please visit http://www.opencores.org/mailinglists.shtml