RE: [openrisc] uClinux applications

["Javier" <javier_castillo_villar@yahoo.es>]

THATS IT

I didnt rebuild uclinux. I rebuild it and it works. 
In README.or32 dont say you have to rebuild uclinux after dd command.

THANKS

-----Mensaje original-----
De: owner-openrisc@opencores.org [mailto:owner-openrisc@opencores.org]
En nombre de Simon Srot
Enviado el: miércoles, 27 de noviembre de 2002 16:16
Para: openrisc@opencores.org
Asunto: Re: [openrisc] uClinux applications

Well, maybe I will again say something that you already know, but you
have to rebuild the uclinux after executing 'dd' ('genromfs') command,
so the image gets to your linux binary file. If you are doing like this,
than maybe something is wrong with the build procedure
(arch/or32/board/initrd file doesn't enter a build procedure because of
the date or permissions or something), so I suggest to do 'make clean
all', to get rid of all temporary and object files and produce fresh
build. If this is not the case, I really don't know what is wrong, the
files should be there.

Simon

Javier wrote:
> 
> Its not that, I have all the applications compiled and copied to
> romfs/bin and to ext2fs/bin as the instructions in README.or32 says. I
> mounted ext2fs and the applications are there then I unmounted it and
> run uclinux but the applications are nor there.
> 
> Javier Castillo
> 
> -----Mensaje original-----
> De: owner-openrisc@opencores.org [mailto:owner-openrisc@opencores.org]
> En nombre de Simon Srot
> Enviado el: miércoles, 27 de noviembre de 2002 14:34
> Para: openrisc@opencores.org
> Asunto: Re: [openrisc] uClinux applications
> 
> O, now I understand. Those applications are in or1k/uclinux/userland
> folder. Basically, what you have to do is just go to route folder and
> execute 'make' to build them.
> 
> Simon
> 
> Javier wrote:
> >
> > Hi:
> >
> >   I could execute the shell but when uclinux try to execute
> > /bin/ifconfig and route it didnt find those commands. I look at /bin
> and
> > theres only init and sh files. All the files I copy to /ext2fs dont
> > appear.
> >
> > Thanks
> --
> To unsubscribe from openrisc mailing list please visit
> http://www.opencores.org/mailinglists.shtml
> 
> --
> To unsubscribe from openrisc mailing list please visit
http://www.opencores.org/mailinglists.shtml
--
To unsubscribe from openrisc mailing list please visit
http://www.opencores.org/mailinglists.shtml

--
To unsubscribe from openrisc mailing list please visit http://www.opencores.org/mailinglists.shtml