[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [pci] Compiling the core for Altera Cyclone/Stratix
Hi Uwe,
No I have no experence with Altera's core, I am trying to replace a PCI
bridge chip from PLX. I am also some way from finishing the project because
I have to complete the back-end, wishbone to external bus, and also try to
simulate the result. The motivation is that now programmable logic is
getting cheaper than the bought in item. I am also new to verilog, having up
to now used Altera's own AHDL. However it only took about a day to get it
all to compile once I had configured suitable dual port RAM blocks.
regards
Dave
----- Original Message -----
From: "Uwe Bonnes" <bon@elektron.ikp.physik.tu-darmstadt.de>
To: <pci@opencores.org>
Sent: Tuesday, February 11, 2003 11:11 PM
Subject: Re: [pci] Compiling the core for Altera Cyclone/Stratix
> >>>>> "Dave" == Dave Warren <dave@luscher.co.uk> writes:
>
> Dave> Just to say I have successfully compiled the core, using
Altera's
> Dave> free Quartus II software. Some minor changes are needed in order
> Dave> to user Altera's memory blocks (called M4K) as the dual port
> Dave> memory for FIFO's. Dave Warren
>
> Did you work with the Altera PCI Core before? What work is it to replace
the
> Altera Core with the Openpci core?
>
> Dave> dave@luscher.co.uk<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0
>
> Please, no HTML. HTML in mail to mailing lists only blows up the
archives...
>
> Bye
> --
> Uwe Bonnes bon@elektron.ikp.physik.tu-darmstadt.de
>
> Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt
> --------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------
> --
> To unsubscribe from pci mailing list please visit
http://www.opencores.org/mailinglists.shtml
>
--
To unsubscribe from pci mailing list please visit http://www.opencores.org/mailinglists.shtml