RE: [usb] CSR of Function core

["Leo Jarillas" <leo.jarillas@eazix.com>]

Thanks Rudi.

If I am to simulate the Function core, do I have to always put the
correct LineState value or only during the reset sequence?

-----Original Message-----
From: Rudolf Usselmann [mailto:rudi@asics.ws] 
Sent: Wednesday, July 16, 2003 12:36 PM
To: usb@opencores.org
Subject: Re: [usb] CSR of Function core

On Wed, 2003-07-16 at 10:04, Leo Jarillas wrote:
> Hi,
>   I just want some clarifications on the USB Function Core datasheet.
> On page 29, the CSR is indicated as a RW register with width 32.  But
on
> page 31-32, all of the fields are RO.  My questions are:
> 
> -- which of the two is correct?
> -- are there any field in on the CSR that should be RW?
> 
> Thanks.
> Leo

The information on pages 31 & 32 is correct. Table 2 is
not necessarily accurate. Same is true for other registers.

Regards, 
rudi               
--------------------------------------------------------
www.asics.ws  --- Solutions for your ASIC/FPGA needs ---
----------------- FPGAs * Full Custom ICs * IP Cores ---
FREE IP Cores --> http://www.asics.ws/ <-- FREE IP Cores

--
To unsubscribe from usb mailing list please visit
http://www.opencores.org/mailinglists.shtml

--
To unsubscribe from usb mailing list please visit http://www.opencores.org/mailinglists.shtml