|
| ||||||||||||||||
| XrlOspfv3V0p1Client (XrlSender* s)
| XrlOspfv3V0p1Client |
| ~XrlOspfv3V0p1Client ()
| ~XrlOspfv3V0p1Client |
[virtual]
| typedef XorpCallback1<void, const XrlError&>::RefPtr SetInstanceIdCB | SetInstanceIdCB |
| bool send_set_instance_id (
const char* dst_xrl_target_name,
const uint32_t& id,
const SetInstanceIdCB& cb
)
| send_set_instance_id |
Send Xrl intended to:
Set instance id
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr SetRouterIdCB | SetRouterIdCB |
| bool send_set_router_id (
const char* dst_xrl_target_name,
const IPv4& id,
const SetRouterIdCB& cb
)
| send_set_router_id |
Send Xrl intended to:
Set router id
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr SetIpRouterAlertCB | SetIpRouterAlertCB |
| bool send_set_ip_router_alert (
const char* dst_xrl_target_name,
const bool& ip_router_alert,
const SetIpRouterAlertCB& cb
)
| send_set_ip_router_alert |
Send Xrl intended to:
Set the router alert in the IP options.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr CreateAreaRouterCB | CreateAreaRouterCB |
| bool send_create_area_router (
const char* dst_xrl_target_name,
const IPv4& area,
const string& type,
const CreateAreaRouterCB& cb
)
| send_create_area_router |
Send Xrl intended to:
Create an area.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| area | id of the area |
| type | of area "border", "stub", "nssa" |
| typedef XorpCallback1<void, const XrlError&>::RefPtr ChangeAreaRouterTypeCB | ChangeAreaRouterTypeCB |
| bool send_change_area_router_type (
const char* dst_xrl_target_name,
const IPv4& area,
const string& type,
const ChangeAreaRouterTypeCB& cb
)
| send_change_area_router_type |
Send Xrl intended to:
Change area type.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| area | id of the area |
| type | of area "border", "stub", "nssa" |
| typedef XorpCallback1<void, const XrlError&>::RefPtr DestroyAreaRouterCB | DestroyAreaRouterCB |
| bool send_destroy_area_router (
const char* dst_xrl_target_name,
const IPv4& area,
const DestroyAreaRouterCB& cb
)
| send_destroy_area_router |
Send Xrl intended to:
Destroy area.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| area | id of the area |
| typedef XorpCallback1<void, const XrlError&>::RefPtr CreatePeerCB | CreatePeerCB |
| bool send_create_peer (
const char* dst_xrl_target_name,
const string& ifname,
const string& vifname,
const string& type,
const IPv4& area,
const CreatePeerCB& cb
)
| send_create_peer |
Send Xrl intended to:
Create a binding to an interface.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| ifname | the interface. |
| vifname | virtual interface. |
| type | of link "p2p", "broadcast", "nbma", "p2m", "vlink" |
| area | id of the area |
| typedef XorpCallback1<void, const XrlError&>::RefPtr DeletePeerCB | DeletePeerCB |
| bool send_delete_peer (
const char* dst_xrl_target_name,
const string& ifname,
const string& vifname,
const DeletePeerCB& cb
)
| send_delete_peer |
Send Xrl intended to:
Delete peer.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr SetPeerStateCB | SetPeerStateCB |
| bool send_set_peer_state (
const char* dst_xrl_target_name,
const string& ifname,
const string& vifname,
const bool& enable,
const SetPeerStateCB& cb
)
| send_set_peer_state |
Send Xrl intended to:
Set the peer state up or down.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr AddAddressPeerCB | AddAddressPeerCB |
| bool send_add_address_peer (
const char* dst_xrl_target_name,
const string& ifname,
const string& vifname,
const IPv4& area,
const IPv6& addr,
const AddAddressPeerCB& cb
)
| send_add_address_peer |
Send Xrl intended to:
Add an address to the peer.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr RemoveAddressPeerCB | RemoveAddressPeerCB |
| bool send_remove_address_peer (
const char* dst_xrl_target_name,
const string& ifname,
const string& vifname,
const IPv4& area,
const IPv6& addr,
const RemoveAddressPeerCB& cb
)
| send_remove_address_peer |
Send Xrl intended to:
Remove an address from the peer.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr SetAddressStatePeerCB | SetAddressStatePeerCB |
| bool send_set_address_state_peer (
const char* dst_xrl_target_name,
const string& ifname,
const string& vifname,
const IPv4& area,
const IPv6& addr,
const bool& enable,
const SetAddressStatePeerCB& cb
)
| send_set_address_state_peer |
Send Xrl intended to:
Set the address state up or down.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr ActivatePeerCB | ActivatePeerCB |
| bool send_activate_peer (
const char* dst_xrl_target_name,
const string& ifname,
const string& vifname,
const IPv4& area,
const ActivatePeerCB& cb
)
| send_activate_peer |
Send Xrl intended to:
Activate peer. Called once the peer and child nodes have been configured.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr UpdatePeerCB | UpdatePeerCB |
| bool send_update_peer (
const char* dst_xrl_target_name,
const string& ifname,
const string& vifname,
const IPv4& area,
const UpdatePeerCB& cb
)
| send_update_peer |
Send Xrl intended to:
Update peer. Called if the peer and child nodes are modified.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr AddNeighbourCB | AddNeighbourCB |
| bool send_add_neighbour (
const char* dst_xrl_target_name,
const string& ifname,
const string& vifname,
const IPv4& area,
const IPv6& neighbour_address,
const IPv4& neighbour_id,
const AddNeighbourCB& cb
)
| send_add_neighbour |
Send Xrl intended to:
Add a neighbour to the peer.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr RemoveNeighbourCB | RemoveNeighbourCB |
| bool send_remove_neighbour (
const char* dst_xrl_target_name,
const string& ifname,
const string& vifname,
const IPv4& area,
const IPv6& neighbour_address,
const IPv4& neighbour_id,
const RemoveNeighbourCB& cb
)
| send_remove_neighbour |
Send Xrl intended to:
Remove a neighbour from the peer.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr CreateVirtualLinkCB | CreateVirtualLinkCB |
| bool send_create_virtual_link (
const char* dst_xrl_target_name,
const IPv4& neighbour_id,
const IPv4& area,
const CreateVirtualLinkCB& cb
)
| send_create_virtual_link |
Send Xrl intended to:
Create a virtual link.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| neighbour_id | the router ID of the other end of the link. |
| area | in which an attempt has been made to configure a virtual link it has to be the backbone. Its just being passed in so it can be checked by the protocol. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr DeleteVirtualLinkCB | DeleteVirtualLinkCB |
| bool send_delete_virtual_link (
const char* dst_xrl_target_name,
const IPv4& neighbour_id,
const DeleteVirtualLinkCB& cb
)
| send_delete_virtual_link |
Send Xrl intended to:
Delete virtual link
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| neighbour_id | the router ID of the other end of the link. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr TransitAreaVirtualLinkCB | TransitAreaVirtualLinkCB |
| bool send_transit_area_virtual_link (
const char* dst_xrl_target_name,
const IPv4& neighbour_id,
const IPv4& transit_area,
const TransitAreaVirtualLinkCB& cb
)
| send_transit_area_virtual_link |
Send Xrl intended to:
The area through which the virtual link transits.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| neighbour_id | the router ID of the other end of the link. |
| transit_area | that the virtual link transits. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr SetInterfaceCostCB | SetInterfaceCostCB |
| bool send_set_interface_cost (
const char* dst_xrl_target_name,
const string& ifname,
const string& vifname,
const IPv4& area,
const uint32_t& cost,
const SetInterfaceCostCB& cb
)
| send_set_interface_cost |
Send Xrl intended to:
The edge cost of this interface.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr SetRetransmitIntervalCB | SetRetransmitIntervalCB |
| bool send_set_retransmit_interval (
const char* dst_xrl_target_name,
const string& ifname,
const string& vifname,
const IPv4& area,
const uint32_t& interval,
const SetRetransmitIntervalCB& cb
)
| send_set_retransmit_interval |
Send Xrl intended to:
RxmtInterval The number of seconds between LSA retransmissions, for adjacencies belonging to this interface. Also used when retransmitting Database Description and Link State Request Packets. This should be well over the expected round-trip delay between any two routers on the attached network. The setting of this value should be conservative or needless retransmissions will result. Sample value for a local area network: 5 seconds.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr SetInftransdelayCB | SetInftransdelayCB |
| bool send_set_inftransdelay (
const char* dst_xrl_target_name,
const string& ifname,
const string& vifname,
const IPv4& area,
const uint32_t& delay,
const SetInftransdelayCB& cb
)
| send_set_inftransdelay |
Send Xrl intended to:
The estimated number of seconds it takes to transmit a Link State Update Packet over this interface. LSAs contained in the Link State Update packet will have their age incremented by this amount before transmission. This value should take into account transmission and propagation delays; it must be greater than zero.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr SetRouterPriorityCB | SetRouterPriorityCB |
| bool send_set_router_priority (
const char* dst_xrl_target_name,
const string& ifname,
const string& vifname,
const IPv4& area,
const uint32_t& priority,
const SetRouterPriorityCB& cb
)
| send_set_router_priority |
Send Xrl intended to:
Used in the designated router election.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr SetHelloIntervalCB | SetHelloIntervalCB |
| bool send_set_hello_interval (
const char* dst_xrl_target_name,
const string& ifname,
const string& vifname,
const IPv4& area,
const uint32_t& interval,
const SetHelloIntervalCB& cb
)
| send_set_hello_interval |
Send Xrl intended to:
The interval between hello messages.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr SetRouterDeadIntervalCB | SetRouterDeadIntervalCB |
| bool send_set_router_dead_interval (
const char* dst_xrl_target_name,
const string& ifname,
const string& vifname,
const IPv4& area,
const uint32_t& interval,
const SetRouterDeadIntervalCB& cb
)
| send_set_router_dead_interval |
Send Xrl intended to:
The period to wait before considering a router dead.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr SetPassiveCB | SetPassiveCB |
| bool send_set_passive (
const char* dst_xrl_target_name,
const string& ifname,
const string& vifname,
const IPv4& area,
const bool& passive,
const SetPassiveCB& cb
)
| send_set_passive |
Send Xrl intended to:
Toggle the passive status of an interface.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr OriginateDefaultRouteCB | OriginateDefaultRouteCB |
| bool send_originate_default_route (
const char* dst_xrl_target_name,
const IPv4& area,
const bool& enable,
const OriginateDefaultRouteCB& cb
)
| send_originate_default_route |
Send Xrl intended to:
If this is a "stub" or "nssa" area toggle the sending of a default route.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr StubDefaultCostCB | StubDefaultCostCB |
| bool send_stub_default_cost (
const char* dst_xrl_target_name,
const IPv4& area,
const uint32_t& cost,
const StubDefaultCostCB& cb
)
| send_stub_default_cost |
Send Xrl intended to:
Set the StubDefaultCost, the default cost sent in a default route in a "stub" or "nssa" area.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr SummariesCB | SummariesCB |
| bool send_summaries (
const char* dst_xrl_target_name,
const IPv4& area,
const bool& enable,
const SummariesCB& cb
)
| send_summaries |
Send Xrl intended to:
Toggle the sending of summaries into "stub" or "nssa" areas.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr AreaRangeAddCB | AreaRangeAddCB |
| bool send_area_range_add (
const char* dst_xrl_target_name,
const IPv4& area,
const IPv6Net& net,
const bool& advertise,
const AreaRangeAddCB& cb
)
| send_area_range_add |
Send Xrl intended to:
Add area range.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr AreaRangeDeleteCB | AreaRangeDeleteCB |
| bool send_area_range_delete (
const char* dst_xrl_target_name,
const IPv4& area,
const IPv6Net& net,
const AreaRangeDeleteCB& cb
)
| send_area_range_delete |
Send Xrl intended to:
Delete area range.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr AreaRangeChangeStateCB | AreaRangeChangeStateCB |
| bool send_area_range_change_state (
const char* dst_xrl_target_name,
const IPv4& area,
const IPv6Net& net,
const bool& advertise,
const AreaRangeChangeStateCB& cb
)
| send_area_range_change_state |
Send Xrl intended to:
Change the advertised state of this area.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr TraceCB | TraceCB |
| bool send_trace (
const char* dst_xrl_target_name,
const string& tvar,
const bool& enable,
const TraceCB& cb
)
| send_trace |
Send Xrl intended to:
Enable/Disable tracing.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| tvar | trace variable. |
| enable | set to true to enable false to disable. |
| typedef XorpCallback5<void, const XrlError&, const bool*, const bool*, const bool*, const vector<uint8_t>*>::RefPtr GetLsaCB | GetLsaCB |
| bool send_get_lsa (
const char* dst_xrl_target_name,
const IPv4& area,
const uint32_t& index,
const GetLsaCB& cb
)
| send_get_lsa |
Send Xrl intended to:
Get a single lsa from an area. A stateless mechanism to get LSAs. The client of this interface should start from zero and continue to request LSAs (incrementing index) until toohigh becomes true.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| area | database that is being searched. |
| index | into database starting from 0. |
| typedef XorpCallback2<void, const XrlError&, const XrlAtomList*>::RefPtr GetAreaListCB | GetAreaListCB |
| bool send_get_area_list (
const char* dst_xrl_target_name,
const GetAreaListCB& cb
)
| send_get_area_list |
Send Xrl intended to:
Get a list of all the configured areas. Return a list of u32 type values. Each value is an area ID.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback2<void, const XrlError&, const XrlAtomList*>::RefPtr GetNeighbourListCB | GetNeighbourListCB |
| bool send_get_neighbour_list (
const char* dst_xrl_target_name,
const GetNeighbourListCB& cb
)
| send_get_neighbour_list |
Send Xrl intended to:
Get the list of neighbours. Return a list of u32 type values. Each value is an internal identifier that can be used with the get_neighbour_info XRL.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| typedef XorpCallback13<void, const XrlError&, const string*, const string*, const string*, const IPv4*, const uint32_t*, const uint32_t*, const IPv4*, const uint32_t*, const IPv4*, const IPv4*, const uint32_t*, const uint32_t*>::RefPtr GetNeighbourInfoCB | GetNeighbourInfoCB |
| bool send_get_neighbour_info (
const char* dst_xrl_target_name,
const uint32_t& nid,
const GetNeighbourInfoCB& cb
)
| send_get_neighbour_info |
Send Xrl intended to:
Get information on a neighbour.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| nid | neighbour ID returned by the get_neighbour_list. |
| typedef XorpCallback1<void, const XrlError&>::RefPtr ClearDatabaseCB | ClearDatabaseCB |
| bool send_clear_database (
const char* dst_xrl_target_name,
const ClearDatabaseCB& cb
)
| send_clear_database |
Send Xrl intended to:
Clear the OSPF database.
Parameters:
| dst_xrl_target_name | the Xrl target name of the destination. |
| XrlSender* _sender | _sender |
[protected]
