README: 7/09/92 /************************************************************************* COPYRIGHT NOTICE: Control Panel Widget Set (Xc), v. 1.3 copyright (c) 1992 by Paul D. Johnston All rights reserved. You may freely use and distribute the Control Panel Widget Set (Xc), but you may not use it, or any widget in the set, in your commercial or freely distributable applications without giving the author due recognition. Example: "This software product makes use of the Control Panel Widget Set (Xc), v. 1.3, copyright 1992 by Paul D. Johnston." **************************************************************************/ TABLE OF CONTENTS: 1. General Info 1.1 Release Notes 1.2 Acknowledgements 1.3 Archive Contents 2. Installation 2.1 Installed System List 3. Xc Widgets 3.1 Getting Started 3.1.1 Tips for Using Xc Widgets 3.1.2 The 3D Effect and Xc Color Resources 3.2 Control Widget 3.3 Value Widget 3.4 SimpleButton Widget 3.5 ValueButton Widget 3.6 Slider Widget 3.7 LCD Widget 3.8 ToggleButton Widget 3.9 LedButton Widget 3.10 BarGraph Widget 4. Bug Reports/Suggestions 1. GENERAL INFO The Control Panel Widget Set, identified as Xc, is an Xt Intrinsics-based widget set that provides a library of widgets for "control panel" style interfaces. Currently it consists of 9 widgets: a Control widget, a Value widget, a SimpleButton widget, a ValueButton widget, a ToggleButton widget, a Slider widget, an Lcd widget, an LedButton widget, and a BarGraph widget. The Control widget is a subclass of the Intrinsics Core widget class and it basically stores resources used by all Xc widget subclasses. The Value widget is a subclass of Control and is also used for subclassing other widgets that manipulate integer/floating point values. The SimpleButton, LedButton, and ToggleButton widgets are subclasses of Control; and the ValueButton, Slider, Lcd, and BarGraph widgets are subclasses of the Value widget. See section 3 of this document for a detailed description and programming info for each widget. One shortcoming with this release of the Xc widget set is that there are no man(1) pages for the widgets yet. I will try to provide these in a future release. Shared libraries are not supported in this release. An additional shortcoming is that the code is not ANSI-C. I will convert to ANSI-C probably by the next version (if we get the ANSI compiler by then). I'll put the affected parts within #ifdef __STDC__ sandwiches in order to maintain compatibility with those who are still working with K&R 'C'. Also, when we get X11R5 from the company that produces the operating system we're working with, I'll add R5 support. I plan on adding a number of 'control panel' style widgets to this widget set in the future, including a Guage widget (similar to the aircraft cockpit guage), a SelectorSwitch (similar in functionality to Motif's RadioBox, but emulates a hardware multi-selection switch), a BarChart widget (many BarGraph widgets connected together with the same value range), and whatever other widgets I decide on. If you have any ideas, let me know. 1.1 RELEASE NOTES Version Changes --------- -------------------------------------------------- 1.3 1. Changed the method for producing the 3D effect: a white/black dashed line is used to produce 'dithered' top & bottom shade colors, thereby using less server resources and increasing the range of background colors to choose from. The old method for the 3D effect is still available for those who choose by specifying a '-DNICE_SHADES' compiler option. 2. ValueButton widget: a. You can now use the keypad '+' and '-' keys or the up and down arrow keys to increment/decrement the value. The Return/Enter keys active the Accept Button also. b. You can rapidly increment/decrement the value by holding the pointer button down within the Up/Down arrows. 3. Slider widget: a. Added a Zoom feature to allow for fine tuning of the Slider's value, implemented with Up/Down Zoom Buttons. b. Added an optional Accept Button. The application's callback function won't be called until the user presses the Accept button (allowing the user to achieve the desired value first). c. Fixed the Nob's movement range to be the center of the Nob. 4. LCD widget: a. Made the border around the LCD Display to be the same proportional size all around. b. Changed the individual LCD segments to have angled ends like a real 7-segment display. 5. Added an "ledVisible" resource to the LedButton widget to allow the application to use it to indicate a state/ status string without a corresponding LED indicator. 6. Changed the SimpleButton widget's minimum size to be the smallest rectangle enclosing the widget's Label. 7. Added a "valueJustify" resource to the Value widget (and subclasses) to allow for left, right, or center justification of the value displayed within the Value Box. 1.2 1. Changed Xc widget class names so that they are preceded by 'xc' in order to prevent possible name collisions with other widget sets. 1.1 1. Fixed Xctest.c so that the argc parameter to XtInitialize is passed by reference (address) instead of by value (oops!). 2. Fixed the xctest shell script so that the #!/bin/sh line is the first line in the file. 3. Added range checking to the Lcd and BarGraph widgets so that the application cannot set a value outside of the XcNupperBound/XcNlowerBound range via the convenience functions or callback functions. 4. Fixed Control.c so that it uses " " instead of "NO LABEL" as the default label if one is not supplied. 1.0 1. Initial release. 1.2 ACKNOWLEDGEMENTS Special thanX goes to the following people for their help in the propagation of this widget set: Jay Chiang chiang@spc5.jpl.nasa.gov Robert Withrow witr@rwwa.COM Markku Savela savela@tel.vtt.fi Przemek Klosowski przemek@rrdstrad.nist.gov Richard Hesketh rlh2@ukc.ac.uk Kevin Sweet sweet@horizon.com 1.3 ARCHIVE CONTENTS Enclosed in the Xc.tar file is the following source code/documentation: FILE DESCRIPTION ---------- --------------------------------------------- README Documentation for the Control Panel Widget Set (Xc) from both the user and application stand-point. Control.h The public header files included by the application Value.h that uses a particular widget. SimpleB.h VButton.h ToggleB.h Slider.h Led.h BarGraf.h Lcd.h Xc.h ControlP.h The private header files used by the each ValueP.h widget's code and by its subclasses. SimpleBP.h VButtonP.h ToggleBP.h SliderP.h LedP.h BarGrafP.h LcdP.h Control.c The actual widget code that contains widget methods, Value.c action functions, and definitions. SimpleB.c VButton.c ToggleB.c Slider.c Led.c BarGraf.c Lcd.c Imakefile An imake file for making an X makefile to build the Xc widget set and test program (use xmkmf on your system to make the Makefile). Xc.mak A simple make file that builds the Xc widgets into an archive library (libXc.a) to be linked with your applications, and also makes the Xctest program as an example Xc application. Use it if you don't have xmkmf (everyone should have it). You will probably have to edit it first. Xctest.c A simple program that creates two of each widget in the Xc widget set and demonstrates widget applications. Xctest.ad An application defaults resource file for the Xctest application (demonstrates Xc widget resource settings). xctest Simple shell script that enables you to try out the Xctest demo program without moving the Xctest.ad file to your app-defaults directory. copyright.doc Copyright Notice for the Xc widget set and source, to be included in any commercial/shareware applications that you use any of these widgets in. 2. INSTALLATION 1) Uncompress and extract the contents of the tar file (Xc-1.3.tar.Z) in the directory of your choice: cat Xc-1.3.tar.Z | uncompress | tar -xfvo - 2) run 'xmkmf' in the directory you extracted into. This will make a Makefile for your system from the Imakefile provided. 3) Then just enter 'make World' to build the Xc library (libXc.a) and the test/demonstration program Xctest. 4) After you have successfully built the Xc library and the demo program, run the 'xctest' script to try the Xctest program with the application defaults file 'Xctest.ad' without having to copy the file to your app-defaults or home directory. 5) Enter `make install' to copy the library and the header files to the installation directories. You may need to be root to do this depending on your setup. 6) To use the library, simply link with it when you build your applications (use the -lXc link option). To include the necessary header files, use (for example) this path specification: #include 2.1 INSTALLED SYSTEM LIST The Xc widget set has been successfully built and run on the following systems: MACHINE OPERATING SYSTEM X11 VERSION -------------- ------------------------ ------------------ Modcomp 9735 (68030) REAL/IX (SVR4 Unix) R3/R4 Intel 386 (clone) Interactive SVR4.0.3.0 R5 Patch 8 Sun 3/60 SunOS 4.1.1 R4 Sparc SunOS 4.1.1 R5 Patch 11 SunIPX SunOS 4.1.2 R5 HP 9000/750 HPUX 8.07 R5 DEC VAX VMS 5.4-3 R4/DECWINDOWS 3. XC WIDGETS 3.1 Getting Started 3.1.1 Tips for Using Xc Widgets To create widgets in the Xc widget set, just use the XtCreateWidget or XtCreateManagedWidget functions and specify the appropriate widget class name (specified in the detailed widget description that follows). Use XtSetArg and XtSetValues if you need to hard code resources in your application. See the Xctest.ad file for an example of setting Xc resources within resource files. Be conscious of each widget's geometry (width & height) because the sizes of each graphical element of a widget are scaled according to the Core widget width & height resource settings. If you find that a widget's label or value string gets clipped by other widget elements, either resize the widget or choose a smaller font. 3.1.2 The 3D Effect and Xc Color Resources As of version 1.3, the method used to produce the 3D effect is a 'dithered' approach using a white and black dashed line against the background to produce the top and bottom shade colors. No colors are allocated in the DefaultColormap, making the widgets more server- resource-efficient. The resulting effect is similar to Motif's, and allows for a much larger range of background colors possible. However, the 3D effect is not as nice (in my opinion) as that produced with the old method. Therefore, the old method of producing the 3D effect is still available by specifying a '-DNICE_SHADES' switch to the compiler (add this to the CCOPTIONS variable in the Makefile) for those who want the better shading. If the '-DNICE_SHADES' option is defined, the Control background color resource setting is used to generate the colors used to make the 3D effect. Basically, the Control widget takes the Control background color setting and calculates a lighter shade of the color for the top & left corners of Xc objects, and calculates a darker shade of the background color for the bottom & right corners of the objects. I found that on our X server (a 256 color Tektronix X Terminal), certain background color settings work better in producing the 3D effect than others. Generally, any "pure" RGB colors (i.e., red, yellow, blue, black, white, green, etc.) do not produce as good a 3D effect. But, I do know that soft colors, pastels, and otherwise bland background colors do work fine to produce the 3D shading effect. Obviously, the lighter a background color is, the less pronounced the lighter shade color will be; and the darker a background is, the less pronounced the darker shade color will be. Also, keep in mind that if you specify this method for producing the 3D effect, the Control widget allocates the shade colors in the DefaultColormap. So if you get the "unable to alloc shade 1/shade 2 color" warning, you will have to kill whatever client is using up alot of colors in the DefaultColormap (a prime culprit of this is if you use xloadimage to load a GIF or other image with alot of colors on the root window). I chose to use the DefaultColormap for allocating the shade colors because of the possibility that false colors will be displayed whenever the pointer is not within an Xc widget's window. If your display can handle alot of colors (like 16 million or something), or you're not using other clients that use up alot of colors, then you shouldn't have to worry about it. 3.2 CONTROL WIDGET xcControlWidgetClass USER INFO - The Control widget serves as the superclass for all of the Xc widgets. It simply stores resources that are common to all of the Xc widget classes (i.e., label, font, colors, etc.). It also calculates the shade colors used in producing the 3D effect. Resources are as follows: Resource Rep. Name Type Default Value Description --------- ---------- ------------- ---------------------- XcNbackground Pixel gray Background color, (used in producing the 3D effect if the -DNICE_SHADES switch is specified). XcNlabel String "" The widget's label. XcNlabelColor Pixel black The label's color. XtNfont XtFontStruct DefaultFont Font used for widget's strings. XcNshadeDepth int 3 Depth of the 3D shadow effect in Pixels. (1 - 5) These resources apply to each of the Xc widget classes. PROGRAMMER'S INFO - Be sure to properly set color or font resources if you hard-code these by using XtSetValues in your application. 3.3 VALUE WIDGET xcValueWidgetClass USER INFO - The Value widget is used only for subclassing widgets that manipulate long integer/floating point values, and it does nothing other than store resource settings common to this widget class. As contained in the Xc widget set header file (Xc.h), the XcDType is defined as an enumerated type containing XcLval, XcHval, and XcFval ("lval", "hval", and "fval" in resource files), and it is used to specify the value's datatype (long, hex, or float). The XcVType is defined as a union containing a long integer (lval) member and a float member (fval), and is used in specifying a Value widget's value, upper and lower bound, and increment resources. The XcNvalueForeground and XcNvalueBackground resources are used to specify the foreground/background color of the widget's displayed value. The XcNvalueJustify resource is a string that identifies how the value should be displayed in the subclass's Value Box (i.e. left, right, or center justification). Resource Rep. Name Type Default Value Description --------- ---------- ------------- ---------------------- XcNdataType XcDType lval The value's data type, either long, hex, or float ("lval", "hval", or "fval"). XcNdecimals int 2 Number of decimal places for float type ("fval") values (1 - 6 places). XcNincrement XcVType 1 Value to increment/ decrement by. XcNupperBound XcVType 100 Maximum value range. XcNlowerBound XcVType 0 Minimum value range. XcNvalue XcVType XcNlowerBound Initial or new value for this widget. XcNvalueForeground Pixel black Foreground Color of the value string in the Value Box. XcNvalueBackground Pixel white Background Color of the Value Box. XcNvalueCallback Pointer NULL Callback function to call when the value has changed by the user. XcNvalueJustify XcValueJustify justifyCenter Specifies how to place the value within the Value Box ("justifyLeft", "justifyRight", or "justifyCenter") Currently, the valid XcNdecimals settings are 1 - 6. Obviously, the XcNincrement setting must be greater than 0, and the XcNupperBound and XcNlowerBound settings must not conflict with each other. The XcNvalue setting must be within the range specified by XcNupperBound/XcNlowerBound. Look at the example application defaults resource file (Xctest.ad) for setting Xc resources in a resource file. PROGRAMMER'S INFO - The accompanying application source file, Xctest.c, demonstrates how to use Xc widgets in application code. The program creates ValueButtons, Sliders, Lcds, and BarGraph widgets. This test program also demonstrates the setting of resource values from application code using XtSetValues(). When specifying floating point values for resource settings (i.e., XcNincrement, XcNupperBound, XcNlowerBound, and XcNvalue) be sure to follow the example in Xctest.c or the settings won't work. Create variables of type XcVType (a union with a long member and a float member), assign your floating point setting to the float member of this union, BUT reference the long member when setting the resource with XtSetArg. Example: { Widget vbutton; Arg args; int i; XcVtype up_bound, lo_bound, increment; /* First, create the ValueButton widget obviously */ /* Set your float type values in the XcVType variables */ increment.fval = 0.01; up_bound.fval = 1.00; lo_bound.fval = 0.00; /* BUT, reference the lval member when using the XtSetArg macro. */ i = 0; XtSetArg(args[i], XcNincrement, increment.lval); i++; XtSetArg(args[i], XcNupperBound, up_bound.lval); i++; XtSetArg(args[i], XcNlowerBound, lo_bound.lval); i++; XtSetValues(vbutton, args, i); /* NOTE: ^ the long member is referenced * even though the value is a float. */ } This seems kludgy, but it's the best way to get by the Xt limitation of the XtArgVal type cast (happens to be a long). Asente & Swick get the credit for this solution. Look at the sample callback function in Xctest.c for using the XcCallData structure in your callback functions. The application should use the XcData pointer type for the call_data parameter in your callbacks for the Value class widgets. For those subclasses that allow the user to manipulate the value, the Value widget calls the XcNvalueCallback whenever the value is changed. The call_data parameter points to a structure containing the widget's datatype, number of decimals, and the new value. See Xctest.c for examples. 3.4 SIMPLE BUTTON WIDGET xcSimpleButtonWidgetClass USER INFO - The SimpleButton widget is similar to Motif's XmPushButton widget. It's provided in the Xc widget set for those who aren't fortunate to have Motif and still want to have cool looking buttons. It is a 3D rectangle button that looks like it's depressed when the user clicks on it. If the user moves the pointer out of the SimpleButton while it is depressed, the SimpleButton will pop back up again (become 'raised'). The SimpleButton is only activated when the user releases the pointer button while the pointer is over the SimpleButton. This feature allows the user to 'change their mind' after pressing the pointer button over the SimpleButton. Once the SimpleButton is activated, the application's registered XcNactivateCallback function is called. Specific resources include: Resource Rep. Name Type Default Value Description --------- ---------- ------------- ---------------------- XcNactivateCallback Pointer NULL Application callback function to be called when the user activates the SimpleButton. PROGRAMMER'S INFO- Include the SimpleB.h header in application code. KNOWN PROBLEMS - None, (yet). FUTURE ENHANCEMENTS - I may add the ability to specify a bitmap/Pixmap in place of the Label. 3.5 VALUE BUTTON WIDGET xcValueButtonWidgetClass USER INFO - The ValueButton widget was created to provide a user-interface element that would allow a user to increment/decrement an integer, long integer, or floating point value by clicking on an Up or Down arrow, and allow an application to access the incremented/decremented value when the user clicks on an Accept button. One of the many possible uses of such a widget would be to provide an interface element enabling the user to quickly change application 'settings' by using the mouse pointer instead of typing values from the keyboard, thus providing a more logical approach to a user-interface (i.e., its more logical to press an up/down arrow to increment/decrement a value instead of typing its new value in some kind of text widget). The Valuebutton widget has five graphical elements: an Up Arrow, a Down Arrow, an Accept Button, a Value Box, and the widget's Label string. The user clicks (once) on the Up Arrow to increment the value in the Value Box by whatever value is specified in the XcNincrement resource setting (default is 1). Likewise, the user clicks on the Down Arrow to decrement the value. The value isn't actually changed until the user releases the pointer button while over the Up/Down Arrow, enabling the user to change his/her mind. The user can click the Up/Down Arrows as many times as he/she likes until the upper range or lower range value is reached (specified by the XcNupper- Bound and XcNlowerBound resource settings); this way the user is prevented from incrementing/decrementing the value beyond specified limits. The Value Box indicates the ValueButton's current numeric value. When the user has set the value to the desired value, he/she can then click on the Accept Button to make the value 'current', which causes the application program's XcNvalueCallback function to be called in order to do something with the current value. The Accept Button does not have a label on it, it is simply the raised 3D button between the Up and Down Arrows. There are keyboard equivalents for the Up/Down Arrows and Accept Button: hit the keypad '+' or '-', or the up/down arrow keys to increment/decrement the value when the pointer is in the ValueButton widget. Similarly, the Return/Enter keys activate the Accept Button. An additional feature of the ValueButton widget is that the user can rapidly increment/decrement the value by pressing the pointer button and holding it down over the Up/Down Arrow. The value will start incrementing/decrementing automatically about 1 second later and will continue to do so until the user releases the pointer button, moves the pointer out of the Up/Down Arrow, or the upper/ lower bound is reached. Additionally, if the user holds down the above mentioned keyboard equivalents, the value will also rapidly increment/ decrement. The following identifies the ValueButton's resources: Resource Rep. Name Type Default Value Description --------- ---------- ------------- ---------------------- (None yet) PROGRAMMER'S INFO - Include the VButton.h header in application code. See PROGRAMMER'S INFO on the Value widget for a description of using the ValueButton in application code. KNOWN PROBLEMS - None, (yet). FUTURE ENHANCEMENTS - I will add a resource that allows for horizontal or vertical orientation of the ValueButton. I plan on creating a Multi-Value Button widget that operates like the ValueButton but it would allow you to manipulate many values of the same datatype within the same widget (taking up less window real-estate). 3.6 SLIDER WIDGET xcSliderWidgetClass USER INFO - The Slider widget is a subclass of the Value widget and it is similar in behavior/functionality to Motif's XmScale widget in that it allows you to manipulate a numeric value over a given range. The Xc Slider widget differs from the Motif XmScale in that it allows manipulation of real floating point values (not just an integer that is displayed like a float). Additionally, the Slider widget allows manipulation of values over a broader range (i.e., the range of 'C' long integer and float types). The Slider widget has 6 graphical elements: the widget's Label, a Nob for changing the widget's value, a Channel that the Nob slides in, a Value Box that displays the widget's current value, an optional Accept Button, and an optional Zoom control (with Zoom Buttons and displayed Zoom Factor) for fine tuning of the Slider's value. If the XcNenableAccept resource is set to True, the Accept Button will appear as the raised button to the left of the Channel with a vertical Slider orientation, or will appear to the left of the Value Box with a horizontal orientation. If the XcNmaxZoomFactor resource is set to a value greater than 0, then the Zoom control will appear to the right of the Channel with a vertical Slider, or will appear to the right of the Value Box with a horizontal orientation. The user can manipulate the widget's value in three ways: click on the Nob and drag it up and down the Channel to increase/decrease the value; click in any place in the Channel, the Nob will move to that place and the value will be changed to the corresponding value; or press the up and down arrows on the keyboard to increment/decrement the value according to its precision (i.e., if the value has 3 decimal places, the value will be incremented/decremented by .001; if the value is integer/hexadecimal, the value will be incremented/ decremented by 1). The Slider also has an optional fine-tune feature that lets the user manipulate values that have large ranges. If the XcNmaxZoomFactor resource is set to an integer number greater than 0, the Zoom controls will be available to allow the user to adjust the 'Zoom Window' over which the Slider Nob can be moved. The Up/Down Zoom Arrows are used to increment/decrement the Zoom Factor (displayed between the Arrows) enabling you to 'zoom' in on the Slider's current value. Basically, the value's range is divided by 2 to the power of the Zoom Factor to determine the 'Zoom Window'. If the Zoom Factor is 0, then there is no zooming (2 to the power of 0 equals 1). The larger the Zoom Factor, the greater the precision for fine tuning the value. You'll have to experiment with the XcNmaxZoomFactor resource to determine the best possible Zoom Factor for fine tuning a value over a given range. The Slider widget can have vertical or horizontal orientation based on the XcNorient resource setting ("vertical" or "horizontal" in resource files, XcVert or XcHoriz in application code). With the vertical orientation, the value is increased as the Nob is moved from bottom to top; and with the horizontal orientation, the value is increased as the Nob is moved from left to right. Application callback functions for the Slider widget will be called under 2 circumstances. If the XcNenableAccept resource is set to False (default), the callback is called whenever the value is changed (i.e., the user clicks on the Nob, drags it, and then releases the pointer button; the user clicks in the Channel to set the Nob; or the user presses the up or down arrow keys on the keyboard). If XcNenableAccept is set to True, the callback is only called when the user presses the Accept Button, thereby allowing the user to achieve the desired value (fine tune, etc.) before any action is taken on that new value. As with all subclasses of the Value widget, the Slider's value (and Nob position) can be set initially or at any time after the widget is created by setting the XcNvalue resource. Specific Slider widget resources are: Resource Rep. Name Type Default Value Description --------- ---------- ------------- ---------------------- XcNorient XcROrient XcVert Slider's orientation: ("vertical" or "horizontal" in resource files, XcVert or XcHoriz in application code. XcNnobColor Pixel black Color of the Slider's Nob. XcNenableAccept Boolean False Enable/disable the Accept Button. XcNmaxZoomFactor Int 0 Sets the max Zoom Factor. PROGRAMMER'S NOTES - Include the Slider.h header in application code. See the Value widget's PROGRAMMER'S NOTES for a description of using the Slider widget in application code. Note that the XcNincrement resource of the Value widget has no effect on the Slider widget. KNOWN PROBLEMS - The Nob seems to move a little slow when dragging it in the Channel (it sometimes lags behind the mouse pointer movement). This is because the widget receives and processes all PointerMotion events. I haven't figured out yet how to make the server send only PointerMotionHints to a widget (I tried using XSelectInput, but that didn't work). If anyone has a solution to this problem, please let me know. FUTURE ENHANCEMENTS - I may add scale segments along the Channel. 3.7 LCD WIDGET xcLcdWidgetClass (ThanX to Robert Withrow for the idea and requirements specification) USER INFO - The LCD widget is also a subclass of the Value widget and it emulates the traditional 7-segment LCD display. It simply takes an application- specified long integer/floating point/hexadecimal value and displays each character of the value in 7-segment LCD fashion. The LCD widget has 2 graphical elements: the widget's Label, and the LCD Display in the center of the widget. The widget basically takes the application-specified value, does a sprintf on it based on the XcNdataType setting, and displays each character in 7-segment fashion (right-justified, starting with the most significant digit) in the LCD Display. The XcNvalueLength resource setting is important. Choose the max length that the value can obtain, otherwise, the displayed value may have its least significant digits clipped. The XcNvalueLength setting is also used in determining the geometry (size, line width, etc.) of each character in the LCD Display; so if the characters get displayed weird, adjust the XcNvalueLength or resize the widget (preferably the latter). Since this widget is used as an indicator, there is currently no user interaction with the Lcd widget. But, there is nothing stopping you from adding your own action functions in your application (e.g., you could popup a 'help' dialog whenever the user clicks the right pointer button in the LCD, etc.). There are two ways the application can update the value in the LCD Display: by specifically setting the XcNvalue resource to the desired value (i.e., using XtSetArg/XtSetValues, or the XcLcdUpdateValue convenience function), or by enabling the widget to notify the application to update the value at timed intervals (via the XcNinterval and XcNupdateCallback resources). See the PROGRAMMER'S NOTES section for more detail. Specific LCD widget resources are: Resource Rep. Name Type Default Value Description --------- ---------- ------------- ---------------------- XcNvalueLength short 10 Length (in characters) of the widget's value. XcNinterval int 0 Time Interval (in milliseconds) between invoking the XcNupdateCallback procedure. XcNupdateCallback Pointer NULL Callback function invoked at XcNinterval milliseconds used to notify the application to update the displayed value. The Value widget's XcNincrement and XcNvalueCallback are not used by this widget. Use the XcNvalueForeground and XcNvalueBackground resources to specify the LCD Display's colors. Realistic colors are red on black, gray on yellow, etc. PROGRAMMER'S NOTES - Include the Lcd.h header in application code. To set the LCD's displayed value, you can use XtSetArgs/XtSetValues as defined in the PROGRAMMER'S NOTES section for the Value widget, or you can use the following convenience function provided with this widget: void XcLcdUpdateValue(LcdWidget w, XcVType *value); /* Example usage */ Widget lcd; XcVType new_value; /* Create the widget first (obviously)... */ new_value.fval = 5.002; /* Update the LCD with the latest value. */ XcLcdUpdateValue(lcd, &new_value); Applications can also specify a callback function to be invoked at specified time intervals in order to update the value displayed in the LCD. In order to do this, set the XcNinterval to the desired time interval in milliseconds, and add an XcNupdateCallback function for the specific LCD widget. The following example defines a callback function to set the LCD widget's displayed value: /* Voltage update interval: 500 msecs. */ #define VOLTAGE_INTERVAL 500 /* Declaration of callback function. */ void Update_value(Widget w, caddr_t client_data, XcData call_data); /* Globals */ Widget Lcd; float Current_voltage; { /* probably function main()... */ int i; Arg args[10]; /* Create all the necessary widgets... */ /* Set resources to enable update value notification at timed intervals. */ i = 0; XtSetArg(args[i], XcNinterval, VOLTAGE_INTERVAL); i++; XtSetValues(Lcd, args, i); /* Specify the callback to be invoked by the LCD widget. */ XtAddCallback(Lcd, XcNupdateCallback, Update_value, NULL); } /* Callback function to update the LCD's displayed value with the voltage. */ void Update_value(w, client_data, call_data) Widget w; caddr_t client_data; XcData call_data; /* Important: must be XcData type. */ { /* Set the LCD's displayed value to be the current measured voltage. */ call_data->value.fval = Current_voltage; } The call_data parameter of the XcNupdateCallback will be a pointer to an XcNCallData structure containing the widget's current value, its datatype, and number of decimal places if applicable. The XcNupdateCallback function must set the value member of the structure pointed to by call_data to the new value before it returns. See Xctest.c for an example XcNupdateCallback function. See Value widget's PROGRAMMER'S NOTES for a description of setting Value widget resources in application code. KNOWN PROBLEMS - None (yet). FUTURE ENHANCEMENTS - None planned. 3.8 TOGGLE BUTTON WIDGET (ThanX to Robert Withrow for the idea!) xcToggleButtonWidgetClass USER INFO - This widget behaves in much the same way as the SimpleButton widget, except that it toggles between an 'on' and 'off' state. It is made up of two graphical elements: the widget's Label, and an LED indicator. To toggle between 'on' and 'off', the user simply presses and releases the pointer button while the pointer is in the ToggleButton. When the ToggleButton is toggled like this, the LED indicator will display the color specified by the XcNonColor or XcNoffColor resource setting, depending upon which state has been toggled to. In this way, the user receives a positive indication of the ToggleButton's state, which is represented by the widget as an enumerated type: either of XcOn or XcOff ("on" or "off" in resource files). When the user presses the pointer button over the ToggleButton, it will appear to be 'depressed', and when the user releases the pointer button over the ToggleButton, it will become 'raised' again with the LED indicator changed to the toggled state's color. As with the SimpleButton widget, the user has the option of changing his/her mind when the pointer button has been pressed over the ToggleButton by simply moving the pointer out of the ToggleButton's window. The ToggleButton will raise again but there will be no state change. Specific ToggleButton resources are: Resource Rep. Name Type Default Value Description --------- ---------- ------------- ---------------------- XcNonColor Pixel "green" Color used for indicating the 'on' state. XcNoffColor Pixel "black" Color used for indicating the 'off' state. XcNstate XcToggleState XcOff ToggleButton's current state: XcOn or XcOff ("on" or "off" in resource files). XcNactivateCallback Pointer NULL Callback function called when the ToggleButton has changed states. PROGRAMMER'S NOTES - Include the ToggleB.h header in application code. The application's XcNactivateCallback function will be called whenever the user 'toggles' the ToggleButton's state from off to on and vice-versa. If you need to, you can use the following two convenience functions for setting and retrieving the ToggleButton's current state: void XcToggleSet(ToggleButtonWidget w, XcToggleState state); void XcToggleGet(ToggleButtonWidget w, XcToggleState *state); where XcToggleState is an enumeration, one of XcOn or XcOff. Note that the XcToggleGet function's state parameter is a pointer. KNOWN PROBLEMS - None (yet). FUTURE ENHANCEMENTS - None planned. 3.9 LED BUTTON WIDGET xcLedButtonWidgetClass USER INFO - This widget is a subclass of the Control widget and it is used as an indicator to display an application-specified status to the user. It consists of three graphical elements: the Label, an LED indicator, and an optional State Box that displays an application specified string corresponding to the current LedButton state. Since this widget is used as an indicator, there is currently no user interaction with the LedButton widget. But, there is nothing stopping you from adding your own action functions in your application (e.g., you could popup a 'help' dialog whenever the user clicks the right pointer button in the LedButton, etc.). Both the LED and the State Box are optional, but you need one or the other because without either, the widget would be useless. If XcNledVisible resource is set to True, then the LED indicator will be shown. If the XcNstateVisible resource is True, then the State Box will be shown. This allows for three possible configurations for this indicator widget: an LED by itself, a State Box (state string) by itself, or both an LED and a State Box. With a State Box by itself, the application can indicate application states/status with just a string. Specific LedButton resources are: Resource Rep. Name Type Default Value Description --------- ---------- ------------- ---------------------- XcNledColor Pixel "white" Current color of the LED indicator. XcNstate String NULL String corresponding to the current state. XcNledVisible Boolean True Enable/disable display of the LED indicator. XcNstateVisible Boolean False Enable/disable display of the State Box. XcNstateForeground Pixel "black" Foreground color of the string displayed in the State Box. XcNstateBackground Pixel "white" Background color of the string displayed in the State Box. XcNinterval int 0 Time Interval (in milliseconds) between invoking the XcNupdateCallback procedure. XcNupdateCallback Pointer NULL Callback function invoked at XcNinterval milliseconds used to notify the application to update the LedButton color and state string. PROGRAMMER'S NOTES - To set the current LED color and optionally the state string, you can use XtSetArg/XtSetValues (inconvenient), or you can use the XcLedSetState convenience function: void XcLedSetState(LedButtonWidget w, char *color, char *state_string); where color is a valid color name on your server and the state_string indicates what corresponding string to display in the State Box. If the XcNledVisible resource is set to False, then pass NULL as the color parameter; or if XcNstateVisible is False, then pass NULL as the state_string parameter. You can also have the widget notify your application at XcNinterval time intervals so that your application can update the LED's color and string. See the PROGRAMMER'S NOTES section of the LCD Widget for a description on using the XcNinterval and XcNupdateCallback resources. The LedButton passes a pointer to an XcLedInfoRec structure as the call_data to your registered XcNupdateCallback function. It expects you to copy the new LED color name and state string to the appropriate members of the XcLedInfoRec before your function returns. See the Xctest.c demo program source for an example of this. The XcLedInfoRec is defined as follows in Led.h: typedef struct _LedInfoRec { char color[MAX_COLOR_LEN]; /* New LED color name. */ char str[MAX_STR_LEN]; /* Corresponding state string. */ } XcLedInfoRec, *XcLedCallData; Just assign NULL to the color or str member if the corresponding indicator (XcNledVisible or XcNstateVisible) is disabled. KNOWN PROBLEMS - None (yet). FUTURE ENHANCEMENTS - None anticipated. 3.10 BARGRAPH WIDGET xcBarGraphWidgetClass USER INFO - The BarGraph widget is used as a horizontal or vertical bar graph indication of a specified value. It is a subclass of the Value widget so it can display long integer/hexadecimal/floating point values. This BarGraph widget is not to be confused with a bar chart widget (i.e., it only displays one value, not many values side-by-side). It looks like a digital 'thermometer', or a traditional graphic equalizer band. It is used to visually indicate a current value in relation to a specified range. The BarGraph widget is composed of 4 graphical elements: the Label, a Bar indicator, Scale Segments indicating the range of values and where the current value fits in that range, and optionally a Value Box that displays the current value numerically. Since this widget is used as an indicator, there is currently no user interaction with the BarGraph widget. But, there is nothing stopping you from adding your own action functions in your application (e.g., you could popup a 'help' dialog whenever the user clicks the right pointer button in the BarGraph, etc.). In addition to the Value widget resources, specific BarGraph resources include: Resource Rep. Name Type Default Value Description --------- ---------- ------------- ---------------------- XcNorient XcROrient XcVert BarGraph's orientation: ("vertical" or "horizontal" in resource files, XcVert or XcHoriz in application code. XcNbarForeground Pixel "black" Foreground of the bar in the Bar indicator. XcNbarBackground Pixel "white" Background of the Bar indicator. XcNscaleColor Pixel "black" Color of the Scale Segments. XcNscaleSegments int 7 Number of segments on the Scale. XcNvalueVisible Boolean True Enable/disable the displaying of the Value Box. XcNinterval int 0 Time Interval (in milliseconds) between invoking the XcNupdateCallback procedure. XcNupdateCallback Pointer NULL Callback function invoked at XcNinterval milliseconds used to notify the application to update the BarGraph's color and state string. An odd number for the XcNscaleSegments appears to be best, with the max number of segments allowed is 20 and the minimum is 0. PROGRAMMER'S NOTES - Include the BarGraf.h header file in application code. To change the BarGraph's indicated value you can use XtSetArg/XtSetValues (inconvenient) to set the value resource, or you can use the XcBGUpdateValue convenience function: void XcBGUpdateValue(BarGraphWidget w, XcVType *value); where the value parameter is a pointer to an XcVType union (see Xc.h for the definition of the XcVType union). See the Xctest.c demo code for an example. You can also have the widget notify your application at XcNinterval time intervals so that your application can update the BarGraph's indicated value. See the PROGRAMMER'S NOTES section of the LCD Widget for a description on using the XcNinterval and XcNupdateCallback resources. The BarGraph passes a pointer to an XcCallData structure as the call_data to your registered XcNupdateCallback function. It expects you to copy the new value into the value member before your function returns. KNOWN PROBLEMS - None (yet). FUTURE ENHANCEMENTS - I'll probably create a BarChart widget out of this one in a future version. It will display multiple application-specified values in BarGraph fashion. 4. BUG REPORTS/SUGGESTIONS If you note any problems (compiling, running, etc.) please send email to: xcbugs@spc5.jpl.nasa.gov I'd like to find out if this widget set is usable by the X community. If you have any suggestions for new widgets that could be added to the Xc widget set, or suggestions for improving existing widgets, please send email to: xcuser@spc5.jpl.nasa.gov I'll try to address each problem/suggestion as soon as is feasible. Enjoy! Paul D. Johnston johnston@spc5.jpl.nasa.gov