[oc] Development boards for Virtex or Virtex-E (not Spartan IIs though)

["Paul McFeeters" <paul.mcfeeters@ntlworld.com>]

Manoj,

Thanks, I did see them but I would prefer to stay with the Spartan IIs but
'needs must' so I will probably end up having to switch devices later. I had
hoped that as we have $99 boards with $30 Spartan II PQ208 devices on them
why not a sub $200 board for the $50 Spartan II FG456 devices? So how much
would the
equivalent

260 I/O pins from

B352-100 board       $450
XCV200E-6BG352C      $105
Total                $555

XCV200E-8BG352C      $233   for those higher speed applications, total =
$683

316 I/O pins from

BG432-100 board      $550
XCV300E-6BG432       $192   (the XCV200E-6BG432 came up at $326 on
AvNetMarshall.com!)
Total                $742

XCV300E-8BG432       $385   for those higher speed applications, total =
$935

They don't seem to give much info on the board so if anybody has one of
these boards could they please send me some info about the board maybe even
a photo of it? ;-)

Paul

-----Original Message-----
From: owner-cores@opencores.org [mailto:owner-cores@opencores.org]On
Behalf Of Manoj Viswambharan
Sent: 19 November 2001 20:06
To: cores@opencores.org
Subject: RE: [oc] Multi-layer PCB boards, can it be done in your
kitchen?


Have you looked at one of Xilinx's prototyping boards (or third party
boards)?

http://toolbox.xilinx.com/cgi-bin/xilinx.storefront/791878270/Catalog/1013

Regards,
Manoj Viswambharan
Principle Engineer
Integrated Device Technologies

--
To unsubscribe from cores mailing list please visit http://www.opencores.org/mailinglists.shtml