Re: [mu SETUP] setup 2 NE2000 network cards

From: Michele Andreoli (
Date: Thu Apr 29 1999 - 16:52:50 CEST

On Thu, Apr 29, 1999 at 08:15:54AM +0200, Martin Wolfrum wrote:

> io=0x320 (for my thirst ethernet card on ISA)
> I have tried to add an secound line or to add the parameter behind a comma
> but it didnīt work.

muLinux insert the module with this (equivalent) command:

                # insmod /tmp/ne.o io=0x... irq=...

When I take a look to Ethernet-HOWTO, I'am not to be able to understand
if this command can accecpt two io= specs.

>From by hand testing, it seems don't work.
For built-in modules, this is achieved with LILO parameters:

                ether=5,0x300,eth0 ether=?,0x280, eth1

(when muLinux boot, at boot: prompt insert:

                boot: mulinux ether=.....

But, for modular kernel (like mulinuz) I don't know if it's possibile.
Can you ask to some Linux newsgroup?


Mi sarebbe piaciuto concludere con un'affermazione positiva, ma
non me ne vengono in mente. Vanno bene due negative?
						-- Woody Allen

This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:12 CET