From: winsor (winsor@wi.net)
Date: Tue Dec 14 1999 - 02:01:20 CET
Can you login at under 19,200K???
It almost sounds like you've configured PAP or CHAP in which case you
shouldn't need to login as the login is done automatically via the
scripts........using regular minicom under linux....after a ppp
connection is established you see garbage being generated on the minicom
screen......I personally take this as a sign that PPP has been
established......and fire up my browser*grin*
Good Luck
signed
winsor
Vieira Netto wrote:
>
> Hello World Of Mulinux!
>
> Hello R. Venkateswaran,
>
> Adictionaly, using miterm try:
> ati1
> ati2
> ati5
>
> If you get response, your CPU connected with your modem and you can
> verify some modem parameters.
>
> I have a External USR 33.6 that works fine, or almost.
>
> My problem is different, even using a 33.6 modem I cant use more than
> 19.2, cause I get strangers caracteres (not recognized) on screen, so it
> connects but I cant login. This is not a MuLinux previlege. It happens
> with every linux (Red Hat, Mandrake...), and only with Linux. Using
> Widows it works fine.
>
> I know it´s not Mulinux problem, but could anybody say a word, have
> somebody had a problem Like this???
>
> Using Pentium 266 Mboard Asus using ttyS1 at 0x2f8 (irq =3) is a 16550A
>
> bye from Brazil,
>
> Vieira
> Vieira@intermega.com.br
> Linux User #100.600
>
> Microsoft??? Marca nova de papel Higiênico??? (MuLinux)
>
>
> winsor escreveu:
> >
> > Although I'm not sure exactly what's going on here you may wish to try
> > connecting "raw"
> > try (from the command prompt)
> >
> > echo "ATDT555-1212/n" >/dev/ttys?
> > or /dev/cua?
> > with the "?" being your port number
> > if your modems working at all this should attempt to dial directory
> > assistance.........of course use cntrl-C to end the connection.
> > This won't get you connected via PPP but will at least tell you that
> > your port is "talking" to the external modem......even if all you hear
> > is a few clicks
> >
> > Good Luck
> > signed
> > winsor
> >
> > R. Venkateswaran wrote:
> > >
> > > Hi,
> > >
> > > I have "cloned" mulinux v6r4 (stable version) on my PC with
> > > 16MB RAM and 500 MB HD. Things work fine as a stand-alone
> > > system.
> > >
> > > But, I am unable to get my modem to work. So, I cannot
> > > dial-out to my ISP :-(
> > > Initially, I tried PPP, but nothing worked. Then I tried to
> > > test my modem with minicom. My modem is connected to
> > > /dev/ttyS0. When I start minicom, the DTR and RTS lights go
> > > ON, so I know I am using the right modem port. But, I don't
> > > get "OK" response from the modem for my AT commands.
> > >
> > > I think there is a mismatch with the START/STOP bits, speed
> > > settings or the number of bits setup. How do I set this up
> > > in mulinux?
> > > The modem works fine under Win95.
> > >
> > > Thanks,
> > > Venki
> > > --
> > > R. Venkateswaran (Venki) [email ->
> > > mailto:venki@lucent.com]
> > > Lucent Technologies Bell Labs, Phone: (630)-979-6253
> > > 263 Shuman Blvd., Room 2E-241, Naperville, IL 60566.
> > >
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: mulinux-unsubscribe@sunsite.auc.dk
> For additional commands, e-mail: mulinux-help@sunsite.auc.dk
---------------------------------------------------------------------
To unsubscribe, e-mail: mulinux-unsubscribe@sunsite.auc.dk
For additional commands, e-mail: mulinux-help@sunsite.auc.dk
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:12 CET