From: R. Venkateswaran (venki@lucent.com)
Date: Wed Dec 22 1999 - 18:01:24 CET
>
> Hello, Venki, please let me know: do you have tried using
> 57600
> directly in the ppp setup? Do not works?
Michele,
Actually, PPP works fine if I use ppp-on script and setup ppp connection
rate to 19200. (ppp does not work if I set it to 38400 or higher). But, ppp
does not work when I try manual login through miterm, unless I set the
baud_base to 57600. Of course, this is only required for 14.4 kbps modem.
On my laptop which has a 28.8 modem, I did not have to do anything to the
baud_base setting.
I think, it might be a good idea to have a baud_base setting feature in the
port configuration script so that users will be able to set the value if
they want.
>
> If no, I've to add the baud_base setup in "setup port", as
> you did.
>
> Michele
>help@sunsite.auc.dk
---------------------------------------------------------------------
To unsubscribe, e-mail: mulinux-unsubscribe@sunsite.auc.dk
For additional commands, e-mail: mulinux-help@sunsite.auc.dk
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:12 CET