[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [openrisc] Ethernet Core Performance



I had something similarly.

When I wanted to telnet nothing come to the hosting machine and after a
minute it closed the connection.
I discovered that it helps to press CTRL+J or CTRL+h or CTRL+G (I don't
remember which one). After pressing this data was sent to remote
computer and I could login and do everything. It was like pressing the
"send" button after each command.

Regards,
	Igor

> -----Original Message-----
> From: owner-openrisc@opencores.org
[mailto:owner-openrisc@opencores.org]
> On Behalf Of Michael McAllister
> Sent: Tuesday, June 17, 2003 9:10 PM
> To: openrisc@opencores.org
> Subject: [openrisc] Ethernet Core Performance
> 
> Hi guys-
> 
> I am getting very close to getting the whole OpenRISC processor &
> peripherals up & running on my FPGA.  I am now working the Ethernet
> controller; we are using an Intel LXT972A for the PHY.  I am able to
> ping & FTP, but have two issues.
> 
> 1) The response seems VERY slow.  Our processor is running at 20MHz...
> is can take tens of seconds to start an FTP session to a remote host,
> and the xfer rate is terrible (BYTES per second on a 100Mbps
> connection).
> 
> 2) I am having difficulty with TELNET.  I can telnet to another
machine,
> but not login.  It seems that the program is not receiving input from
> stdin; I am using a serial line & the UART core.  When I run the
> program:
>   /bin> telnet 132.158.1.28
>   Trying 132.158.1.28(23)...
>   Connected to 132.158.1.28.
>   Escape character is '^]'.
>   Red Hat Linux release 7.3 (Valhalla)
>   Kernel 2.4.18-3 on an i686
>   login:
> 
> then, after a minute or so, I get:
> 
> Connection closed by foreign host.
> /bin>
> 
> and the shell receives input normally.  Anyone else seen this?
> 
> With sincere thanks,
> Michael McAllister
> 
> --
> To unsubscribe from openrisc mailing list please visit
> http://www.opencores.org/mailinglists.shtml

--
To unsubscribe from openrisc mailing list please visit http://www.opencores.org/mailinglists.shtml