[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [pci] CardBus interface
Hello,
I am joining this thread rather late. I am also looking for a CardBus
interface that can be targeted to both ASIC and FPGA. We own the
Xilinx cardbus IP, but it is encrypted and cannot be targeted to ASIC.
Has anyone successfully used the OpenCore PCI for CardBus
functionality? Please share your experience.
Thanks,
Eugene
----- Original Message -----
From: random_user@1...
To: pci@o...
Date: Sat, 22 Jun 2002 07:20:41 +0200
Subject: Re: [pci] CardBus interface
>
>
> Hi,
> Thank you for you answer!
> But I still have a question:Do I have to add a separate module
> to the
> current PCI CORE to implement the CCLKRUN# function?
> Do you have any ideas of designing such a module ?
>
> regards,
> wangc
>
>
> ----- Original Message -----
> From: "Chandrashekar" <chandrashekar@r... >
> To: <pci@o... >
> Date: Fri, 21 Jun 2002 10:29:10 +0530
> Subject: Re: [pci] CardBus interface
>
> >
> >
> > Hi,
> >
> > It is correct that all the BAR's are common for the given
> > configuration
> > space. so it is same as PCI.
> >
> > The CCLKRUN# which is output from the card is required for the
> PC
> > Card to
> > control the CardBus clock signal CCLK, i.e you can indicate
> the
> > host to
> > start the clock by asserting this signal and also it indicates
> the
> > status of
> > the CCLK to the host.
> >
> > The CSTSCHG# is an optional signal in CardBus PC Card
> >
> > regards
> > Chandrashekar
> >
> > ----- Original Message -----
> > From: <random_user@1... >
> > To: <pci@o... >
> > Sent: Friday, June 21, 2002 7:30 AM
> > Subject: RE: [pci] CardBus interface
> >
> >
> > > I have compared the CardBus spec. with the PCI spec 2.2
> and I
> > found
> > > no difference in using the BARs in the conf.
> > > I think they are the same in using it.
> > > I am confused of the CSTSCHG# pin and the CCLKRUN# pin.
> > > HOW to handle them?
> > > I don't think the CSTSCHG# pin is of much use.And, it is
> > optional.So,
> > > can I design a CardBus bridge core without it?
> > > As for the CCLKRUN# pin,I don't know how to deal with it.
> > > What's your opinion?
> > > Any help wiil be appreciated!
> > >
> > > regards,
> > > wangc
> > >
> > >
> > >
> > > ----- Original Message -----
> > > From: "Charles Krinke" <ckrinke@p... >
> > > To: <pci@o... >
> > > Date: Thu, 20 Jun 2002 08:32:28 -0700
> > > Subject: RE: [pci] CardBus interface
> > >
> > > >
> > > >
> > > > I believe the term multifunction in the context of
> this
> > mailing
> > > > list and the
> > > > PCI bridge refers solely to those PCI devices that
> have
> > more then
> > > > one
> > > > function in a single device. This is the term as
> used by
> > the PCI
> > > > specification itself. Many Intel chips such as the
> 82371
> > > > Northbridge that is
> > > > on many motherboards and the 80312 Companion chip
> that I
> > use with
> > > > the 80200
> > > > processor are multifunction devices. This means they
> have
> > more then
> > > > one
> > > > Vendor/DeviceID, more then one set of configuration
> > registers and
> > > > more then
> > > > one set of functions.
> > > > In each PCI device, there are several Base Address
> > Registers. It is
> > > > entirely
> > > > common for one BAR to address MEM and a second BAR
> to
> > address IO
> > > > space in
> > > > the same PCI device.
> > > > As for PC CARDS, dont know much about that, know a
> bit
> > about PCI.
> > > > Charles
> > > >
> > > > -----Original Message-----
> > > > From: owner-pci@o...
> > > >
> > [/cgi-bin/post.cgi?cmd=new&to=owner-pci%20at%20opencores%
> > > 20dot%20org&msg=/ml-archive/pci/msg00044.shtml
> > > > Behalf
> > > > Of random_user@1...
> > > > Sent: Thursday, June 20, 2002 4:17 AM
> > > > To: pci@o...
> > > > Subject: Re: [pci] CardBus interface
> > > >
> > > >
> > > > Hi,
> > > > It looks like that there is no concept of
> multifunction
> > in the
> > > > CardBus
> > > > specification
> > > > In my opinion,this concept
> > > > is used in the 16-bit PC CARD specification,in which
> a
> > CARD can be
> > > > used
> > > > only as MEM Card or I/O Card.When a card is used for
> both
> > MEM and
> > > > I/O
> > > > operation ,it is called multifunction Card.
> > > > But in the CardBus specification and later,the
> > term--multifunction
> > > > appeared no more.
> > > > Am I right?If not,can you tell me what's the right ?
> > > > Thank you for any information.
> > > > And,I want to know when the PCI bridge core is
> modified
> > to be used
> > > > as
> > > > CardBus bridge core, what,in details,should be
> modified ?
> > > > Thanks.
> > > > regards,
> > > > wangc
> > > >
> > > >
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "Chandrashekar" <chandrashekar@r... >
> > > > To: <pci@o... >
> > > > Date: Thu, 20 Jun 2002 10:40:15 +0530
> > > > Subject: Re: [pci] CardBus interface
> > > >
> > > > >
> > > > >
> > > > > Hi,
> > > > >
> > > > > I refered the PC Card CardBus specification
> document
> > and it
> > > > says
> > > > > the BAR's
> > > > > usage in case of CardBus is similar to PCI
> BARs. But
> > one BAR
> > > > is
> > > > > sufficient
> > > > > for one function implemented in the card. For
> > multifunction
> > > > cardbus
> > > > > cards,
> > > > > you have to use as much BAR(max 6) as the no.
> of
> > > > multifunctions
> > > > > implemented
> > > > > in the card
> > > > >
> > > > > regards,
> > > > > Chandrashekar
> > > > >
> > > > > ----- Original Message -----
> > > > > From: <random_user@1... >
> > > > > To: <pci@o... >
> > > > > Sent: Thursday, June 20, 2002 8:09 AM
> > > > > Subject: Re: [pci] CardBus interface
> > > > >
> > > > >
> > > > > > hi,
> > > > > > I am working on CardBus interface now.
> > > > > > I think the base address registers in the
> conf
> > can be
> > > > used for
> > > > > CardBus in
> > > > > > the same way.Do you think so?
> > > > > >
> > > > > > regards,
> > > > > > wangc
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > From: "Chandrashekar"
> <chandrashekar@r...
> > >
> > > > > > To: <pci@o... >
> > > > > > Date: Wed, 19 Jun 2002 09:46:53 +0530
> > > > > > Subject: [pci] CardBus interface
> > > > > >
> > > > > > > Hi,
> > > > > > >
> > > > > > > I need to design CardBus interface. I
> have
> > PCI open
> > > > core
> > > > > downloaded
> > > > > > > and I have modified it to target only
> > operation. Now
> > > > I
> > > > > want to
> > > > > > > convert the PCI target only design to
> > CardBus
> > > > design. I
> > > > > am not very
> > > > > > > clear about using the Base address
> > register in the
> > > > > configuration
> > > > > > > space for the cardbus interface. Does
> any
> > one
> > > > working on
> > > > > CardBus
> > > > > > > interface? or any information on
> cardbus
> > interface
> > > > > design?
> > > > > > >
> > > > > > > thanks
> > > > > > > chandrashekar
> > > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> > >
> >
>
--
To unsubscribe from pci mailing list please visit http://www.opencores.org/mailinglists.shtml