| Class | Description |
|---|
| AS4AggregatorAttribute | |
| AS4Path | |
| AS4PathAttribute |
AS4PathAttribute contain an AS4Path, whose structure is documented
in aspath. |
| AS4Segment | |
| ASPath |
An ASPath is a list of ASSegments, each of which can be an AS_SET,
AS_CONFED_SET, AS_SEQUENCE, or an AS_CONFED_SEQUENCE. |
| ASPathAttribute |
ASPathAttribute contain an ASPath, whose structure is documented
in aspath. |
| ASPrependFilter | BGPRouteFilter that prepends an AS to the AS path.
|
| ASSegment |
Parent class for ASPath elements, which can be either ASSet or ASSequence. |
| AcceptSession | |
| AddressFamilyMismatch | |
| AfiSafi | |
| AggregateRoute | |
| AggregationFilter | filters out aggregate routes depending whether on IBGP or EBGP
outbound branch.
|
| AggregationHandler | |
| AggregationTable | |
| AggregatorAttribute | |
| AtomicAggAttribute | |
| Att_Ptr_Cmp |
Att_Ptr_Cmp is needed because we want BGPAttributeManager to use a
set of pointers, but when we check to see if something's in the set,
we want to compare the data and not the pointers themselves. |
| AttributeManager |
AttributeManager manages the storage of PathAttributeLists, so
that we don't store the same attribute list more than once. |
| BGP4ByteASCapability | |
| BGPCapParameter | |
| BGPMain |
The password for TCP-MD5 authentication. |
| BGPMain::RoutingTableToken |
Token generator to map between unicast and multicast. |
| BGPMain::RoutingTableToken::WhichTable | |
| BGPMain::Server |
Store the socket descriptor and iptuple together. |
| BGPMultiProtocolCapability | |
| BGPMultiRouteCapability | |
| BGPPacket |
The main container for BGP messages (packets) which are sent
back and forth. |
| BGPParameter | |
| BGPPeer | |
| BGPPeerData |
Data that applies to a specific peering. |
| BGPPeerList | |
| BGPPlumbing | |
| BGPPlumbingAF | |
| BGPRefreshCapability | |
| BGPRouteFilter | Base class for a single filter within FilterTable's filter bank.
|
| BGPRouteTable | Base class for a stage in BGP's internal plumbing. |
| BGPTimerConst | |
| BGPUnknownCapability | |
| BGPUpdateAttrib |
Encoding used in BGP update packets to encode prefixes
(IPv4 only) for withdrawn routes and NLRI information. |
| BGPUpdateAttribList | |
| BGPVarRW | Allows reading an modifying a BGP route.
|
| BGPVarRWCallbacks | |
| BGPVarRWExport | Returns the output peering for the neighbor variable.
|
| BgpTrie |
The BgpTrie is an augmented, specialized trie that allows us to
lookup by network address or by path attribute list. |
| CacheRoute |
Used in CacheTable to store a SubnetRoute and the genid of the
RibIn that generated the route. |
| CacheTable | specialized BGPRouteTable that stores routes modified by a
FilterTable.
|
| ChainedSubnetRoute | |
| ClusterListAttribute | |
| CommunityAttribute | |
| ComponentRoute | |
| ConfigVar |
The value of a configuration variable and its state enable/disabled. |
| CorruptMessage |
This exception is thrown when a bad input message is received. |
| CrashDumpManager | |
| CrashDumper | |
| Damp |
An entry of this form exists for all networks. |
| DampPeerOscillations |
Manage the damping of peer oscillations. |
| DampRoute |
An entry of this form exists only if the route has been damped. |
| Damping | |
| DampingTable |
Manage the damping of routes. |
| DebugPeerHandler | |
| DebugTable | |
| DecisionTable | BGPRouteTable which receives routes from all peers and
decided which routes win.
|
| DeleteAllNodes | Delete nodes in the cache table trie.
|
| DeletionTable | DeletionTable is a temporary BGPRouteTable used to delete
routes when a peer goes down. |
| DummyNextHopResolver | |
| DumpIterator | |
| DumpTable | |
| FanoutTable | |
| FilterTable | specialized BGPRouteTable implementing a filter bank to
modify or drop routes.
|
| FilterVersion | specific version of a static route filter. |
| IBGPLoopFilter | BGPRouteFilter that drops routes that came to us from an IBGP peer.
|
| InternalMessage | InternalMessage is used to pass route changes between BGP
route table classes.
|
| Iptuple |
Store the Local Interface, Local Server Port, Peer Interface and
Peer Server Port tuple. |
| KeepAlivePacket |
KeepAlivePacket are extremely simple, being made only of a header. |
| KnownCommunityFilter | BGPRouteFilter that processes well-known communities.
|
| LocalData |
Data that applies to all BGP peerings. |
| LocalPrefAttribute |
LocalPrefAttribute is a well-known uint32
|
| LocalPrefInsertionFilter | BGPRouteFilter that inserts a LocalPref attribute.
|
| LocalPrefRemovalFilter | BGPRouteFilter that deletes a LocalPref attribute.
|
| MEDAttribute |
MEDAttribute is an optional non-transitive uint32
|
| MEDInsertionFilter | BGPRouteFilter that inserts a MED attribute.
|
| MEDRemovalFilter | BGPRouteFilter that removes a MED attribute.
|
| MPReachNLRIAttribute | |
| MPUNReachNLRIAttribute | |
| MessageQueueEntry | |
| NHRequest | |
| NextHopAttribute |
NextHopAttribute contains the IP address of the next hop. |
| NextHopCache |
A cache of next hop information. |
| NextHopCache::NextHopEntry | |
| NextHopResolver | |
| NextHopRibRequest |
Make requests of the RIB and get responses. |
| NextTableMap |
NextTableMap behaves more or less like a map between a
BGPRouteTable<A>* and a const PeerHandler*, but it gives
deterministic ordering semantics so our test suites aren't
dependent on the memory allocator. |
| NextTableMapIterator | |
| NexthopPeerCheckFilter | BGPRouteFilter rewrites the nexthop if it matches the peers
address.
|
| NexthopRewriteFilter | BGPRouteFilter that changes the nexthop attribute in a route.
|
| NhLookupTable | |
| NoFinder | |
| NotificationPacket | |
| OpenPacket | |
| OriginAttribute |
OriginAttribute has a payload of size 1 containing the origin type. |
| OriginateRouteFilter |
Perform any filter operations that are required for routes that we
originate. |
| OriginatorIDAttribute |
OriginatorIDAttribute is an optional non-transitive uint32
|
| PathAttribute | |
| PathAttributeList |
PathAttributeList is used to handle efficiently path attribute lists. |
| Path_Att_Ptr_Cmp | |
| PeerDumpState | |
| PeerHandler |
PeerHandler's job is primarily format conversion. |
| PeerTableInfo | |
| PolicyTable | Generic Policy filter table suitable for export filters.
|
| PolicyTableExport | Export policy tables match neighbor in a different way.
|
| PolicyTableImport | Import policy tables also deal with propagating policy route dumps.
|
| PolicyTableSourceMatch | SourceMatch table has the aditional ability to perform route dumps.
|
| ProcessWatch | |
| ProcessWatch::Process | |
| RRIBGPLoopFilter | BGPRouteFilter that drops or reflects routes from an IBGP
peer. Add the originator ID and the cluster ID.
|
| RRInputFilter | BGPRouteFilter that drops routes with this routers
ORIGINATOR_ID or CLUSTER_ID.
|
| RRPurgeFilter | RRPurge Remove ORIGINATOR_ID and CLUSTER_LIST attributes.
|
| ReaderIxTuple | |
| RibDeregisterQueueEntry |
The old answer if we are in the process of reregistering so
that lookups will be satisfied with this old answer. |
| RibInTable | Specialized BGPRouteTable that stores routes from a BGP peer.
|
| RibIpcHandler | |
| RibOutTable | |
| RibRegisterQueueEntry | |
| RibRequestQueueEntry |
The queue of outstanding requests to the RIB. |
| RouteData |
Container for a route and the meta-data about the origin of a route
used in the DecisionTable decision process. |
| RouteQueueEntry | |
| RouteTableReader | |
| SimpleASFilter | BGPRouteFilter that drops routes that have a particular AS
in their AS path.
|
| Socket | |
| SocketClient | |
| SocketServer | |
| StoredAttributeList | |
| SubnetRoute | SubnetRoute holds a BGP routing table entry.
|
| SubnetRouteConstRef | a class to hold a const reference to a SubnetRoute. |
| SubnetRouteRef | a class to hold a reference to a SubnetRoute. |
| UnknownAttribute | |
| UnknownFilter | BGPRouteFilter that processes unknown attributes.
|
| UnresolvableHost |
from_previous_peering is set on messages where the deleted route
originates from a previous peering that has now gone down. |
| UpdatePacket | |
| XrlBgpTarget | |
| XrlQueue | |
| XrlQueue::Queued | |
