[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [oc] i2c core with DS1621 (temp sensor)
----- Original Message -----
From: Nanda <nanda@c... >
To: cores@o...
Date: Sun, 12 Aug 2001 15:40:38 +0500 (GMT+0500)
Subject: Re: [oc] i2c core with DS1621 (temp sensor)
>
>
>
> hi rob ,
> one way to solve the problem is by changing the vhdl compiler
> settingd
> to accept 93 std , or simply remove that "IS" , i asume that the
> "is" is
> in the component declaration line .
>
>
> On Sun, 12 Aug 2001, Richard Herveille wrote:
>
> >
> > Hi Rob,
> >
> > Don't use MaxPlus to compile VHDL code. It's VHDL compiler is
> not compliant
> > to common coding styles. Use Leonardo Spectrum, it will also
> recognize the
> > VHDL-93 code.
> >
> > Concerning the temperature sensor, trust me it works. I did
> the design and
> > it reports the temperature just fine, in hexadecimal notation
> though (I was
> > to lazy to convert hex. into dec. :-)
> >
> > Richard
> >
> > >I'm having some problems getting this to compile using
> MAX+plus II
> > >v.9.23. I'm using a student version of MAX+plus II.
> There error is as
> > >follows:
> > >
> > >VHDL version error: IS in a component declaration is a
> VHDL 1993 feature,
> > >but project is being compiled for VHDL 1987
> > >
> > >Is there anyway to correct this? If I can't use MAX+plus
> II then will
> > >LeoSpec work?
> > >
> > >Has anyone used the simple core with this temp sensor?
> I'm assuming it
> > >will work, but not positive.
> > >
> > >Thanks,
> > >
> > >Rob
> > >
> > >
> >
>
>
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> K.G.Nanda Kumar
> Research Engineer
> Sat Comm. C-DOT
> 71/1,millers road
> Bangalore 560052
> ph:2263399 Extn 324
>
--
To unsubscribe from cores mailing list please visit http://www.opencores.org/mailinglists.shtml