Re: available now for testing only

Date: Thu Nov 16 2000 - 11:36:28 CET


I thought I set the mouse port correctly, must have
something else messed up then if "psaux" is ok.

/dev/ttyS0 unused this box
/dev/ttyS1 USR internal 56k modem
/dev/ttyS2 old Logitech "First Mouse" serial mouse. PSAUX
setting appropriate?
/dev/ttyS3 serial port

Had a lot of other stuff to deal with. I'll get back to
testing that later.

- - - - - - - - - - - - - - -

""er uh, sorry about that,
As I zipped a working mulinux10.5 install I forgot that I
configured a mouse to check Xwindows.
The proper port for a serial mouse would be either
/dev/ttyS0 com1
/dev/ttyS1 com2
/dev/ttyS2 com3
/dev/ttyS3 com4

with proper protocol being (depending on mouse type)anything
but PS/2


Bob Goodwin - Durant, Florida

Red Hat Linux release 7.0
Kernel 2.2.16-22 i586

This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:16 CET