[openrisc] FW: Running ORPsoc simulator

["Robert Cragie" <rcc@jennic.com>]

I made a small mistake in uclibc Config which meant that or32-uclibc-xxx
tools ended up in the wrong directory. However, I am still having problems:

Build uclinux/userland/init as per README.or32 - FAIL:

or32-uclibc-gcc   -c -o simpleinit.o simpleinit.c
or32-uclibc-gcc -r -d simpleinit.o -o init
/opt/or32-uclinux/lib/gcc-lib/or32-uclinux/3.1/../../../../or32-uclinux/bin/
ld: cannot open crt0.o: No such file or directory
collect2: ld returned 1 exit status

So the original comments re. crt0.o still apply.

Any help much appreciated.

Thanks in advance.

Robert Cragie, Design Engineer
_______________________________________________________________
Jennic Ltd, Furnival Street, Sheffield, S1 4QT,  UK
http://www.jennic.com  Tel: +44 (0) 114 281 2655
_______________________________________________________________
Visit our stand (C79) at DATE - Munich 4-6 March 2003
_______________________________________________________________
-----Original Message-----
From: Robert Cragie [mailto:rcc@jennic.com]
Sent: 10 February 2003 15:51
To: OpenRISC
Subject: Running ORPsoc simulator

I am trying to build everything to get a 'Hello World' running on the ORPsoc
simulator. I am doing the following, using
http://www.opencores.org/projects/or1k/GNU%20Toolchain%20Port as the main
guide line, plus the tutorial in
http://www.opencores.org/forums/openrisc/2002/11/00070 and the README.or32
in or1k/uclinux/uClinux-2.0.x. I am having problems further down the line.
'OK' means 'built without error', although there are many warnings (is this
to be expected?):
[snip]


--
To unsubscribe from openrisc mailing list please visit http://www.opencores.org/mailinglists.shtml