RE: [openrisc] Running ORPsoc simulator

["Scott Furman" <sfurman@rosum.com>]

To build uclinux et al, I started with the ATS script (opencore's
automated nightly build) and modified it for my needs.  I had no problem
building under RH8.  The ATS script is downloadable from this page:

http://www.opencores.org/projects/or1k/ATS

AFAIK, you're correct that --local-prefix is not required for GCC
configuration.


-----Original Message-----
From: owner-openrisc@opencores.org [mailto:owner-openrisc@opencores.org]
On Behalf Of Robert Cragie
Sent: Tuesday, February 11, 2003 11:35 AM
To: openrisc@opencores.org
Subject: RE: [openrisc] Running ORPsoc simulator

Hi Marko,

I apologise for being a pest, but I'm starting to get desperate :-(

> I cannot remember what is wrong, how it should be linked, if you
> want to use
> -c and -o options.
> Try looking at mailing list archive, there have been already a lot of
> discussion on this subject.

There has been a lot of discussion, which I have read very carefully,
but I
cannot work out what the conclusion is - most seems to be concerning
failure
to build the simulator, not these 'userland' applications; the only
other
hint was that or32-uclibc-gcc should be run, which I am now doing.

The bottom line is that the Makefiles supplied in the
or1k/uclinux/userland/init etc. don't work as checked out. This means
one of
two things:
[... remainder deleted...]


--
To unsubscribe from openrisc mailing list please visit http://www.opencores.org/mailinglists.shtml